mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
20ea6adbf1
Build system: x86_64 Build-tested: bcm2708, bcm2709, bcm2710, bcm2711 Run-tested: bcm2708/RPiB+, bcm2709/RPi3B, bcm2710/RPi3B, bcm2711/RPi4B Signed-off-by: Marty Jones <mj8263788@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
33 lines
1.2 KiB
Diff
33 lines
1.2 KiB
Diff
From ddcc0cd30d39445fe4f00ee355f5ec4a7d3405aa Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Date: Fri, 11 Feb 2022 14:15:26 +0000
|
|
Subject: [PATCH] drm/vc4: Remove entry to ULPS from vc4_dsi
|
|
post_disable
|
|
|
|
Post_disable was sending the D-PHY sequence to put any device
|
|
into ULPS suspend mode, and then cutting power to the DSI block.
|
|
The power-on reset state of the DSI block is for DSI to be in
|
|
an operational state, not ULPS, so it then never sent the sequence
|
|
for exiting ULPS. Any attached device that didn't have an external
|
|
reset therefore remained in ULPS / standby, and didn't function.
|
|
|
|
Use of ULPS isn't well specified in DRM, therefore remove entering
|
|
it to avoid the above situation.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
drivers/gpu/drm/vc4/vc4_dsi.c | 2 --
|
|
1 file changed, 2 deletions(-)
|
|
|
|
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
|
|
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
|
|
@@ -816,8 +816,6 @@ static void vc4_dsi_bridge_post_disable(
|
|
struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
|
|
struct device *dev = &dsi->pdev->dev;
|
|
|
|
- vc4_dsi_ulps(dsi, true);
|
|
-
|
|
clk_disable_unprepare(dsi->pll_phy_clock);
|
|
clk_disable_unprepare(dsi->escape_clock);
|
|
clk_disable_unprepare(dsi->pixel_clock);
|