openwrt/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
Zhang Jingye 9c915d1e7b ipq806x: Fix wireless support for Netgear Nighthawk X4S D7800
D7800 has a simular hardware to R7800 and uses dual QCA9980 for both 2.4GHz and 5GHz band.
However there is no proper initialization for them, which causes a kernel panic due to failed firmware loading.

This patch adds d7800 to ath10k caldata extraction list.
I can get two functional wireless bands after making change to it.

Signed-off-by: Zhang Jingye <934526987@qq.com>
2017-02-01 17:37:58 +01:00

99 lines
1.9 KiB
Bash

#!/bin/sh
ath10kcal_die() {
echo "ath10cal: " "$*"
exit 1
}
ath10kcal_from_file() {
local source=$1
local offset=$2
local count=$3
dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
ath10kcal_die "failed to extract calibration data from $source"
}
ath10kcal_extract() {
local part=$1
local offset=$2
local count=$3
local mtd
mtd=$(find_mtd_chardev $part)
[ -n "$mtd" ] || \
ath10kcal_die "no mtd device found for partition $part"
dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
ath10kcal_die "failed to extract calibration data from $mtd"
}
ath10kcal_patch_mac() {
local mac=$1
[ -z "$mac" ] && return
macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
}
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/ipq806x.sh
. /lib/functions.sh
. /lib/functions/system.sh
board=$(ipq806x_board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:01:00.0.bin")
case $board in
c2600)
ath10kcal_extract "radio" 4096 12064
# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1)
;;
d7800 |\
r7500v2 |\
r7800)
ath10kcal_extract "art" 4096 12064
;;
ea8500)
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
ath10kcal_extract "art" 4096 12064
;;
nbg6817)
ath10kcal_extract "0:ART" 4096 12064
;;
vr2600v)
ath10kcal_extract "ART" 4096 12064
;;
esac
;;
"ath10k/cal-pci-0001:01:00.0.bin")
case $board in
c2600)
ath10kcal_extract "radio" 20480 12064
# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2)
;;
d7800 |\
r7500v2 |\
r7800)
ath10kcal_extract "art" 20480 12064
;;
ea8500)
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
ath10kcal_extract "art" 20480 12064
;;
nbg6817)
ath10kcal_extract "0:ART" 20480 12064
;;
vr2600v)
ath10kcal_extract "ART" 20480 12064
;;
esac
;;
*)
exit 1
;;
esac