mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
793f8ab62c
Add kernel patches for version 6.1. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2702 lines
67 KiB
Diff
2702 lines
67 KiB
Diff
From 227eddefe9cb07dd1d160f0015b0d17d66cd3cf8 Mon Sep 17 00:00:00 2001
|
|
From: Naushir Patuck <naush@raspberrypi.com>
|
|
Date: Thu, 7 May 2020 15:50:54 +0100
|
|
Subject: [PATCH] media: i2c: imx477: Support for the Sony IMX477
|
|
sensor
|
|
|
|
dt-bindings: media: i2c: Add IMX477 CMOS sensor binding
|
|
|
|
Add YAML device tree binding for IMX477 CMOS image sensor.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
|
|
media: i2c: Add driver for Sony IMX477 sensor
|
|
|
|
Adds a driver for the 12MPix Sony IMX477 CSI2 sensor.
|
|
Whilst the sensor supports 2 or 4 CSI2 data lanes, this driver
|
|
currently only supports 2 lanes.
|
|
|
|
The following Bayer modes are currently available:
|
|
|
|
4056x3040 12-bit @ 10fps
|
|
2028x1520 12-bit (binned) @ 40fps
|
|
2028x1050 12-bit (cropped/binned) @ 50fps
|
|
1012x760 10-bit (scaled) @ 120 fps
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Add support for adaptive frame control
|
|
|
|
Use V4L2_CID_EXPOSURE_AUTO_PRIORITY to control if the driver should
|
|
automatically adjust the sensor frame length based on exposure time,
|
|
allowing variable frame rates and longer exposures.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Return correct result on sensor id verification
|
|
|
|
The test should return -EIO if the register read id does not match
|
|
the expected sensor id.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Parse and register properties
|
|
|
|
Parse device properties and register controls for them using the V4L2
|
|
fwnode properties helpers.
|
|
|
|
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
|
|
media: i2c: imx477: Selection compliance fixes
|
|
|
|
To comply with the intended usage of the V4L2 selection target when
|
|
used to retrieve a sensor image properties, adjust the rectangles
|
|
returned by the imx477 driver.
|
|
|
|
The top/left crop coordinates of the TGT_CROP rectangle were set to
|
|
(0, 0) instead of (8, 16) which is the offset from the larger physical
|
|
pixel array rectangle. This was also a mismatch with the default values
|
|
crop rectangle value, so this is corrected. Found with v4l2-compliance.
|
|
|
|
While at it, add V4L2_SEL_TGT_CROP_BOUNDS support: CROP_DEFAULT and
|
|
CROP_BOUNDS have the same size as the non-active pixels are not readable
|
|
using the selection API. Found with v4l2-compliance.
|
|
|
|
This commit mirrors 543790f777ba1b3264c168c653db6d415e7c983f done for
|
|
the imx219 sensor.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Remove auto frame length adjusting
|
|
|
|
The V4L2_CID_EXPOSURE_AUTO_PRIORITY was used to let the sensor control
|
|
frame length (effectively framerate) based on the requested exposure
|
|
time requested. Remove this feature as it is never used, and goes
|
|
against how V4L2 likes to handle exposure and vblank controls.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Add very long exposure control to the driver
|
|
|
|
Add support for very long exposures by using the exposure multiplier
|
|
register. Userland does not need to pass any additional controls to
|
|
enable long exposures, it simply requests a larger vblank to extend the
|
|
exposure control range appropriately.
|
|
|
|
Currently, since hblank is fixed, a maximum of approximately 124 seconds
|
|
of exposure time can be used. In a future change, hblank could also be
|
|
controlled in userland to give over 200 seconds of exposure time.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Fix crop height for 2028x1080 mode
|
|
|
|
The crop height for this mode was set at 2600 lines, it should be 2160
|
|
lines instead.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Replace existing 1012x760 mode
|
|
|
|
The existing 1012x760 120 fps mode has significant IQ problem using
|
|
the internal sensor scaler. Replace this mode with a 1332x990 120 fps
|
|
mode instead. This new mode has a smaller field of view, but does not
|
|
suffer from the bad IQ of the original mode.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Remove internal v4l2_mbus_framefmt from the state
|
|
|
|
The only field in this struct that is used is the format code, so
|
|
replace the struct with this single field.
|
|
|
|
Save the format code in imx477_set_pad_format() when setting up a new
|
|
mode so that imx477_get_pad_format() performs the right lookup.
|
|
Otherwise, this caused a bug where the mode lookup occurred on the
|
|
12-bit table rather than the 10-bit table.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Remove unused function parameter
|
|
|
|
The struct imx477 *ctrl parameter is not used in the function
|
|
imx477_adjust_exposure_range(), so remove it.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Fix for long exposure limit calculations
|
|
|
|
Do not scale IMX477_EXPOSURE_OFFSET with the long exposure factor during
|
|
the limit calculations. This allows larger exposure times, and does seem to be
|
|
what the sensor is doing internally.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Extend driver to support imx378 sensor
|
|
|
|
The imx378 sensor is almost identical to the imx477 and can be
|
|
supported as a "compatible" sensor with just a few extra register
|
|
writes.
|
|
|
|
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Fix framerates for 1332x990 mode
|
|
|
|
The imx477 driver's line length for this mode had not been updated to
|
|
the value supplied to us by the sensor manufacturer. With this
|
|
correction the sensor delivers the framerates that are expected.
|
|
|
|
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Allow control of on-sensor DPC
|
|
|
|
A module parameter "dpc_enable" is added to allow the control of the
|
|
sensor's on-board DPC (Defective Pixel Correction) function.
|
|
|
|
This is a global setting to be configured before using the sensor;
|
|
there is no intention that this would ever be changed on-the-fly.
|
|
|
|
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Sensor should report RAW color space
|
|
|
|
Tested on Raspberry Pi running libcamera.
|
|
|
|
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Add vsync trigger_mode parameter
|
|
|
|
trigger_mode == 0 (default) => no effect / no registers written
|
|
trigger_mode == 1 => source
|
|
trigger_mode == 2 => sink
|
|
|
|
This can be set e.g. in /boot/cmdline.txt as imx477.trigger_mode=N
|
|
|
|
Signed-off-by: Jonas Jacob <jonas.jacob@neocortexvision.com>
|
|
|
|
media: i2c: Update imx477 Kconfig entry
|
|
|
|
Bring the IMX477 Kconfig declaration in line with upstream entries.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Correct minimum exposure lines
|
|
|
|
The minimum number of exposure lines value (IMX477_EXPOSURE_MIN) was
|
|
previously 20 but this is not correct. The datasheet is not completely
|
|
explicit, however the new value of 4 has been tested with all the
|
|
sensor modes supported by this driver, and matches the lowest exposure
|
|
value of 114us that could be achieved wtih Raspberry Pi's legacy
|
|
firmware driver.
|
|
|
|
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Allow dynamic horizontal blanking control
|
|
|
|
Currently, the V4L2_CID_HBLANK control is marked as read-only. Remove this
|
|
restriction and allow userland to modify the control if needed.
|
|
|
|
Set the maximum limit of the line length to 0xfff0.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Reset hblank on mode switch
|
|
|
|
Reset the hblank control to the minimum value on every mode switch. This is to
|
|
account for userland instances that do not yet control hblank, otherwise it
|
|
gets set to a non-optimal value.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
|
|
media: i2c: imx477: Do not unconditionally adjust hblank and vblank limits
|
|
|
|
On a mode change, only call imx477_set_framing_limits() to adjust the hblank
|
|
and vblank limits if the new mode is different from the existing mode. This
|
|
preserves any manual control values the user might have set.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
---
|
|
.../devicetree/bindings/media/i2c/imx477.yaml | 113 +
|
|
MAINTAINERS | 8 +
|
|
drivers/media/i2c/Kconfig | 11 +
|
|
drivers/media/i2c/Makefile | 1 +
|
|
drivers/media/i2c/imx477.c | 2308 +++++++++++++++++
|
|
5 files changed, 2441 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/media/i2c/imx477.yaml
|
|
create mode 100644 drivers/media/i2c/imx477.c
|
|
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/media/i2c/imx477.yaml
|
|
@@ -0,0 +1,113 @@
|
|
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
+%YAML 1.2
|
|
+---
|
|
+$id: http://devicetree.org/schemas/media/i2c/imx477.yaml#
|
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
+
|
|
+title: Sony 1/2.3-Inch 12Mpixel CMOS Digital Image Sensor
|
|
+
|
|
+maintainers:
|
|
+ - Naushir Patuck <naush@raspberypi.com>
|
|
+
|
|
+description: |-
|
|
+ The Sony IMX477 is a 1/2.3-inch CMOS active pixel digital image sensor
|
|
+ with an active array size of 4056H x 3040V. It is programmable through
|
|
+ I2C interface. The I2C address is fixed to 0x1A as per sensor data sheet.
|
|
+ Image data is sent through MIPI CSI-2, which is configured as either 2 or
|
|
+ 4 data lanes.
|
|
+
|
|
+properties:
|
|
+ compatible:
|
|
+ const: sony,imx477
|
|
+
|
|
+ reg:
|
|
+ description: I2C device address
|
|
+ maxItems: 1
|
|
+
|
|
+ clocks:
|
|
+ maxItems: 1
|
|
+
|
|
+ VDIG-supply:
|
|
+ description:
|
|
+ Digital I/O voltage supply, 1.05 volts
|
|
+
|
|
+ VANA-supply:
|
|
+ description:
|
|
+ Analog voltage supply, 2.8 volts
|
|
+
|
|
+ VDDL-supply:
|
|
+ description:
|
|
+ Digital core voltage supply, 1.8 volts
|
|
+
|
|
+ reset-gpios:
|
|
+ description: |-
|
|
+ Reference to the GPIO connected to the xclr pin, if any.
|
|
+ Must be released (set high) after all all supplies and INCK are applied.
|
|
+
|
|
+ # See ../video-interfaces.txt for more details
|
|
+ port:
|
|
+ type: object
|
|
+ properties:
|
|
+ endpoint:
|
|
+ type: object
|
|
+ properties:
|
|
+ data-lanes:
|
|
+ description: |-
|
|
+ The sensor supports either two-lane, or four-lane operation.
|
|
+ For two-lane operation the property must be set to <1 2>.
|
|
+ items:
|
|
+ - const: 1
|
|
+ - const: 2
|
|
+
|
|
+ clock-noncontinuous:
|
|
+ type: boolean
|
|
+ description: |-
|
|
+ MIPI CSI-2 clock is non-continuous if this property is present,
|
|
+ otherwise it's continuous.
|
|
+
|
|
+ link-frequencies:
|
|
+ allOf:
|
|
+ - $ref: /schemas/types.yaml#/definitions/uint64-array
|
|
+ description:
|
|
+ Allowed data bus frequencies.
|
|
+
|
|
+ required:
|
|
+ - link-frequencies
|
|
+
|
|
+required:
|
|
+ - compatible
|
|
+ - reg
|
|
+ - clocks
|
|
+ - VANA-supply
|
|
+ - VDIG-supply
|
|
+ - VDDL-supply
|
|
+ - port
|
|
+
|
|
+additionalProperties: false
|
|
+
|
|
+examples:
|
|
+ - |
|
|
+ i2c0 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ imx477: sensor@10 {
|
|
+ compatible = "sony,imx477";
|
|
+ reg = <0x1a>;
|
|
+ clocks = <&imx477_clk>;
|
|
+ VANA-supply = <&imx477_vana>; /* 2.8v */
|
|
+ VDIG-supply = <&imx477_vdig>; /* 1.05v */
|
|
+ VDDL-supply = <&imx477_vddl>; /* 1.8v */
|
|
+
|
|
+ port {
|
|
+ imx477_0: endpoint {
|
|
+ remote-endpoint = <&csi1_ep>;
|
|
+ data-lanes = <1 2>;
|
|
+ clock-noncontinuous;
|
|
+ link-frequencies = /bits/ 64 <450000000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+...
|
|
--- a/MAINTAINERS
|
|
+++ b/MAINTAINERS
|
|
@@ -19279,6 +19279,14 @@ T: git git://linuxtv.org/media_tree.git
|
|
F: Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
|
|
F: drivers/media/i2c/imx412.c
|
|
|
|
+SONY IMX477 SENSOR DRIVER
|
|
+M: Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
|
|
+L: linux-media@vger.kernel.org
|
|
+S: Maintained
|
|
+T: git git://linuxtv.org/media_tree.git
|
|
+F: Documentation/devicetree/bindings/media/i2c/imx477.yaml
|
|
+F: drivers/media/i2c/imx477.c
|
|
+
|
|
SONY MEMORYSTICK SUBSYSTEM
|
|
M: Maxim Levitsky <maximlevitsky@gmail.com>
|
|
M: Alex Dubov <oakad@yahoo.com>
|
|
--- a/drivers/media/i2c/Kconfig
|
|
+++ b/drivers/media/i2c/Kconfig
|
|
@@ -1023,6 +1023,17 @@ config VIDEO_UDA1342
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called uda1342.
|
|
|
|
+config VIDEO_IMX477
|
|
+ tristate "Sony IMX477 sensor support"
|
|
+ depends on I2C && VIDEO_DEV
|
|
+ select VIDEO_V4L2_SUBDEV_API
|
|
+ help
|
|
+ This is a Video4Linux2 sensor driver for the Sony
|
|
+ IMX477 camera. Also supports the Sony IMX378.
|
|
+
|
|
+ To compile this driver as a module, choose M here: the
|
|
+ module will be called imx477.
|
|
+
|
|
config VIDEO_VP27SMPX
|
|
tristate "Panasonic VP27's internal MPX"
|
|
depends on VIDEO_DEV && I2C
|
|
--- a/drivers/media/i2c/Makefile
|
|
+++ b/drivers/media/i2c/Makefile
|
|
@@ -48,6 +48,7 @@ obj-$(CONFIG_VIDEO_IMX334) += imx334.o
|
|
obj-$(CONFIG_VIDEO_IMX335) += imx335.o
|
|
obj-$(CONFIG_VIDEO_IMX355) += imx355.o
|
|
obj-$(CONFIG_VIDEO_IMX412) += imx412.o
|
|
+obj-$(CONFIG_VIDEO_IMX477) += imx477.o
|
|
obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
|
|
obj-$(CONFIG_VIDEO_ISL7998X) += isl7998x.o
|
|
obj-$(CONFIG_VIDEO_KS0127) += ks0127.o
|
|
--- /dev/null
|
|
+++ b/drivers/media/i2c/imx477.c
|
|
@@ -0,0 +1,2308 @@
|
|
+// SPDX-License-Identifier: GPL-2.0
|
|
+/*
|
|
+ * A V4L2 driver for Sony IMX477 cameras.
|
|
+ * Copyright (C) 2020, Raspberry Pi (Trading) Ltd
|
|
+ *
|
|
+ * Based on Sony imx219 camera driver
|
|
+ * Copyright (C) 2019-2020 Raspberry Pi (Trading) Ltd
|
|
+ */
|
|
+#include <asm/unaligned.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/gpio/consumer.h>
|
|
+#include <linux/i2c.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/of_device.h>
|
|
+#include <linux/pm_runtime.h>
|
|
+#include <linux/regulator/consumer.h>
|
|
+#include <media/v4l2-ctrls.h>
|
|
+#include <media/v4l2-device.h>
|
|
+#include <media/v4l2-event.h>
|
|
+#include <media/v4l2-fwnode.h>
|
|
+#include <media/v4l2-mediabus.h>
|
|
+
|
|
+static int dpc_enable = 1;
|
|
+module_param(dpc_enable, int, 0644);
|
|
+MODULE_PARM_DESC(dpc_enable, "Enable on-sensor DPC");
|
|
+
|
|
+static int trigger_mode;
|
|
+module_param(trigger_mode, int, 0644);
|
|
+MODULE_PARM_DESC(trigger_mode, "Set vsync trigger mode: 1=source, 2=sink");
|
|
+
|
|
+#define IMX477_REG_VALUE_08BIT 1
|
|
+#define IMX477_REG_VALUE_16BIT 2
|
|
+
|
|
+/* Chip ID */
|
|
+#define IMX477_REG_CHIP_ID 0x0016
|
|
+#define IMX477_CHIP_ID 0x0477
|
|
+#define IMX378_CHIP_ID 0x0378
|
|
+
|
|
+#define IMX477_REG_MODE_SELECT 0x0100
|
|
+#define IMX477_MODE_STANDBY 0x00
|
|
+#define IMX477_MODE_STREAMING 0x01
|
|
+
|
|
+#define IMX477_REG_ORIENTATION 0x101
|
|
+
|
|
+#define IMX477_XCLK_FREQ 24000000
|
|
+
|
|
+#define IMX477_DEFAULT_LINK_FREQ 450000000
|
|
+
|
|
+/* Pixel rate is fixed at 840MHz for all the modes */
|
|
+#define IMX477_PIXEL_RATE 840000000
|
|
+
|
|
+/* V_TIMING internal */
|
|
+#define IMX477_REG_FRAME_LENGTH 0x0340
|
|
+#define IMX477_FRAME_LENGTH_MAX 0xffdc
|
|
+
|
|
+/* H_TIMING internal */
|
|
+#define IMX477_REG_LINE_LENGTH 0x0342
|
|
+#define IMX477_LINE_LENGTH_MAX 0xfff0
|
|
+
|
|
+/* Long exposure multiplier */
|
|
+#define IMX477_LONG_EXP_SHIFT_MAX 7
|
|
+#define IMX477_LONG_EXP_SHIFT_REG 0x3100
|
|
+
|
|
+/* Exposure control */
|
|
+#define IMX477_REG_EXPOSURE 0x0202
|
|
+#define IMX477_EXPOSURE_OFFSET 22
|
|
+#define IMX477_EXPOSURE_MIN 4
|
|
+#define IMX477_EXPOSURE_STEP 1
|
|
+#define IMX477_EXPOSURE_DEFAULT 0x640
|
|
+#define IMX477_EXPOSURE_MAX (IMX477_FRAME_LENGTH_MAX - \
|
|
+ IMX477_EXPOSURE_OFFSET)
|
|
+
|
|
+/* Analog gain control */
|
|
+#define IMX477_REG_ANALOG_GAIN 0x0204
|
|
+#define IMX477_ANA_GAIN_MIN 0
|
|
+#define IMX477_ANA_GAIN_MAX 978
|
|
+#define IMX477_ANA_GAIN_STEP 1
|
|
+#define IMX477_ANA_GAIN_DEFAULT 0x0
|
|
+
|
|
+/* Digital gain control */
|
|
+#define IMX477_REG_DIGITAL_GAIN 0x020e
|
|
+#define IMX477_DGTL_GAIN_MIN 0x0100
|
|
+#define IMX477_DGTL_GAIN_MAX 0xffff
|
|
+#define IMX477_DGTL_GAIN_DEFAULT 0x0100
|
|
+#define IMX477_DGTL_GAIN_STEP 1
|
|
+
|
|
+/* Test Pattern Control */
|
|
+#define IMX477_REG_TEST_PATTERN 0x0600
|
|
+#define IMX477_TEST_PATTERN_DISABLE 0
|
|
+#define IMX477_TEST_PATTERN_SOLID_COLOR 1
|
|
+#define IMX477_TEST_PATTERN_COLOR_BARS 2
|
|
+#define IMX477_TEST_PATTERN_GREY_COLOR 3
|
|
+#define IMX477_TEST_PATTERN_PN9 4
|
|
+
|
|
+/* Test pattern colour components */
|
|
+#define IMX477_REG_TEST_PATTERN_R 0x0602
|
|
+#define IMX477_REG_TEST_PATTERN_GR 0x0604
|
|
+#define IMX477_REG_TEST_PATTERN_B 0x0606
|
|
+#define IMX477_REG_TEST_PATTERN_GB 0x0608
|
|
+#define IMX477_TEST_PATTERN_COLOUR_MIN 0
|
|
+#define IMX477_TEST_PATTERN_COLOUR_MAX 0x0fff
|
|
+#define IMX477_TEST_PATTERN_COLOUR_STEP 1
|
|
+#define IMX477_TEST_PATTERN_R_DEFAULT IMX477_TEST_PATTERN_COLOUR_MAX
|
|
+#define IMX477_TEST_PATTERN_GR_DEFAULT 0
|
|
+#define IMX477_TEST_PATTERN_B_DEFAULT 0
|
|
+#define IMX477_TEST_PATTERN_GB_DEFAULT 0
|
|
+
|
|
+/* Trigger mode */
|
|
+#define IMX477_REG_MC_MODE 0x3f0b
|
|
+#define IMX477_REG_MS_SEL 0x3041
|
|
+#define IMX477_REG_XVS_IO_CTRL 0x3040
|
|
+#define IMX477_REG_EXTOUT_EN 0x4b81
|
|
+
|
|
+/* Embedded metadata stream structure */
|
|
+#define IMX477_EMBEDDED_LINE_WIDTH 16384
|
|
+#define IMX477_NUM_EMBEDDED_LINES 1
|
|
+
|
|
+enum pad_types {
|
|
+ IMAGE_PAD,
|
|
+ METADATA_PAD,
|
|
+ NUM_PADS
|
|
+};
|
|
+
|
|
+/* IMX477 native and active pixel array size. */
|
|
+#define IMX477_NATIVE_WIDTH 4072U
|
|
+#define IMX477_NATIVE_HEIGHT 3176U
|
|
+#define IMX477_PIXEL_ARRAY_LEFT 8U
|
|
+#define IMX477_PIXEL_ARRAY_TOP 16U
|
|
+#define IMX477_PIXEL_ARRAY_WIDTH 4056U
|
|
+#define IMX477_PIXEL_ARRAY_HEIGHT 3040U
|
|
+
|
|
+struct imx477_reg {
|
|
+ u16 address;
|
|
+ u8 val;
|
|
+};
|
|
+
|
|
+struct imx477_reg_list {
|
|
+ unsigned int num_of_regs;
|
|
+ const struct imx477_reg *regs;
|
|
+};
|
|
+
|
|
+/* Mode : resolution and related config&values */
|
|
+struct imx477_mode {
|
|
+ /* Frame width */
|
|
+ unsigned int width;
|
|
+
|
|
+ /* Frame height */
|
|
+ unsigned int height;
|
|
+
|
|
+ /* H-timing in pixels */
|
|
+ unsigned int line_length_pix;
|
|
+
|
|
+ /* Analog crop rectangle. */
|
|
+ struct v4l2_rect crop;
|
|
+
|
|
+ /* Highest possible framerate. */
|
|
+ struct v4l2_fract timeperframe_min;
|
|
+
|
|
+ /* Default framerate. */
|
|
+ struct v4l2_fract timeperframe_default;
|
|
+
|
|
+ /* Default register values */
|
|
+ struct imx477_reg_list reg_list;
|
|
+};
|
|
+
|
|
+static const struct imx477_reg mode_common_regs[] = {
|
|
+ {0x0136, 0x18},
|
|
+ {0x0137, 0x00},
|
|
+ {0xe000, 0x00},
|
|
+ {0xe07a, 0x01},
|
|
+ {0x0808, 0x02},
|
|
+ {0x4ae9, 0x18},
|
|
+ {0x4aea, 0x08},
|
|
+ {0xf61c, 0x04},
|
|
+ {0xf61e, 0x04},
|
|
+ {0x4ae9, 0x21},
|
|
+ {0x4aea, 0x80},
|
|
+ {0x38a8, 0x1f},
|
|
+ {0x38a9, 0xff},
|
|
+ {0x38aa, 0x1f},
|
|
+ {0x38ab, 0xff},
|
|
+ {0x55d4, 0x00},
|
|
+ {0x55d5, 0x00},
|
|
+ {0x55d6, 0x07},
|
|
+ {0x55d7, 0xff},
|
|
+ {0x55e8, 0x07},
|
|
+ {0x55e9, 0xff},
|
|
+ {0x55ea, 0x00},
|
|
+ {0x55eb, 0x00},
|
|
+ {0x574c, 0x07},
|
|
+ {0x574d, 0xff},
|
|
+ {0x574e, 0x00},
|
|
+ {0x574f, 0x00},
|
|
+ {0x5754, 0x00},
|
|
+ {0x5755, 0x00},
|
|
+ {0x5756, 0x07},
|
|
+ {0x5757, 0xff},
|
|
+ {0x5973, 0x04},
|
|
+ {0x5974, 0x01},
|
|
+ {0x5d13, 0xc3},
|
|
+ {0x5d14, 0x58},
|
|
+ {0x5d15, 0xa3},
|
|
+ {0x5d16, 0x1d},
|
|
+ {0x5d17, 0x65},
|
|
+ {0x5d18, 0x8c},
|
|
+ {0x5d1a, 0x06},
|
|
+ {0x5d1b, 0xa9},
|
|
+ {0x5d1c, 0x45},
|
|
+ {0x5d1d, 0x3a},
|
|
+ {0x5d1e, 0xab},
|
|
+ {0x5d1f, 0x15},
|
|
+ {0x5d21, 0x0e},
|
|
+ {0x5d22, 0x52},
|
|
+ {0x5d23, 0xaa},
|
|
+ {0x5d24, 0x7d},
|
|
+ {0x5d25, 0x57},
|
|
+ {0x5d26, 0xa8},
|
|
+ {0x5d37, 0x5a},
|
|
+ {0x5d38, 0x5a},
|
|
+ {0x5d77, 0x7f},
|
|
+ {0x7b75, 0x0e},
|
|
+ {0x7b76, 0x0b},
|
|
+ {0x7b77, 0x08},
|
|
+ {0x7b78, 0x0a},
|
|
+ {0x7b79, 0x47},
|
|
+ {0x7b7c, 0x00},
|
|
+ {0x7b7d, 0x00},
|
|
+ {0x8d1f, 0x00},
|
|
+ {0x8d27, 0x00},
|
|
+ {0x9004, 0x03},
|
|
+ {0x9200, 0x50},
|
|
+ {0x9201, 0x6c},
|
|
+ {0x9202, 0x71},
|
|
+ {0x9203, 0x00},
|
|
+ {0x9204, 0x71},
|
|
+ {0x9205, 0x01},
|
|
+ {0x9371, 0x6a},
|
|
+ {0x9373, 0x6a},
|
|
+ {0x9375, 0x64},
|
|
+ {0x991a, 0x00},
|
|
+ {0x996b, 0x8c},
|
|
+ {0x996c, 0x64},
|
|
+ {0x996d, 0x50},
|
|
+ {0x9a4c, 0x0d},
|
|
+ {0x9a4d, 0x0d},
|
|
+ {0xa001, 0x0a},
|
|
+ {0xa003, 0x0a},
|
|
+ {0xa005, 0x0a},
|
|
+ {0xa006, 0x01},
|
|
+ {0xa007, 0xc0},
|
|
+ {0xa009, 0xc0},
|
|
+ {0x3d8a, 0x01},
|
|
+ {0x4421, 0x04},
|
|
+ {0x7b3b, 0x01},
|
|
+ {0x7b4c, 0x00},
|
|
+ {0x9905, 0x00},
|
|
+ {0x9907, 0x00},
|
|
+ {0x9909, 0x00},
|
|
+ {0x990b, 0x00},
|
|
+ {0x9944, 0x3c},
|
|
+ {0x9947, 0x3c},
|
|
+ {0x994a, 0x8c},
|
|
+ {0x994b, 0x50},
|
|
+ {0x994c, 0x1b},
|
|
+ {0x994d, 0x8c},
|
|
+ {0x994e, 0x50},
|
|
+ {0x994f, 0x1b},
|
|
+ {0x9950, 0x8c},
|
|
+ {0x9951, 0x1b},
|
|
+ {0x9952, 0x0a},
|
|
+ {0x9953, 0x8c},
|
|
+ {0x9954, 0x1b},
|
|
+ {0x9955, 0x0a},
|
|
+ {0x9a13, 0x04},
|
|
+ {0x9a14, 0x04},
|
|
+ {0x9a19, 0x00},
|
|
+ {0x9a1c, 0x04},
|
|
+ {0x9a1d, 0x04},
|
|
+ {0x9a26, 0x05},
|
|
+ {0x9a27, 0x05},
|
|
+ {0x9a2c, 0x01},
|
|
+ {0x9a2d, 0x03},
|
|
+ {0x9a2f, 0x05},
|
|
+ {0x9a30, 0x05},
|
|
+ {0x9a41, 0x00},
|
|
+ {0x9a46, 0x00},
|
|
+ {0x9a47, 0x00},
|
|
+ {0x9c17, 0x35},
|
|
+ {0x9c1d, 0x31},
|
|
+ {0x9c29, 0x50},
|
|
+ {0x9c3b, 0x2f},
|
|
+ {0x9c41, 0x6b},
|
|
+ {0x9c47, 0x2d},
|
|
+ {0x9c4d, 0x40},
|
|
+ {0x9c6b, 0x00},
|
|
+ {0x9c71, 0xc8},
|
|
+ {0x9c73, 0x32},
|
|
+ {0x9c75, 0x04},
|
|
+ {0x9c7d, 0x2d},
|
|
+ {0x9c83, 0x40},
|
|
+ {0x9c94, 0x3f},
|
|
+ {0x9c95, 0x3f},
|
|
+ {0x9c96, 0x3f},
|
|
+ {0x9c97, 0x00},
|
|
+ {0x9c98, 0x00},
|
|
+ {0x9c99, 0x00},
|
|
+ {0x9c9a, 0x3f},
|
|
+ {0x9c9b, 0x3f},
|
|
+ {0x9c9c, 0x3f},
|
|
+ {0x9ca0, 0x0f},
|
|
+ {0x9ca1, 0x0f},
|
|
+ {0x9ca2, 0x0f},
|
|
+ {0x9ca3, 0x00},
|
|
+ {0x9ca4, 0x00},
|
|
+ {0x9ca5, 0x00},
|
|
+ {0x9ca6, 0x1e},
|
|
+ {0x9ca7, 0x1e},
|
|
+ {0x9ca8, 0x1e},
|
|
+ {0x9ca9, 0x00},
|
|
+ {0x9caa, 0x00},
|
|
+ {0x9cab, 0x00},
|
|
+ {0x9cac, 0x09},
|
|
+ {0x9cad, 0x09},
|
|
+ {0x9cae, 0x09},
|
|
+ {0x9cbd, 0x50},
|
|
+ {0x9cbf, 0x50},
|
|
+ {0x9cc1, 0x50},
|
|
+ {0x9cc3, 0x40},
|
|
+ {0x9cc5, 0x40},
|
|
+ {0x9cc7, 0x40},
|
|
+ {0x9cc9, 0x0a},
|
|
+ {0x9ccb, 0x0a},
|
|
+ {0x9ccd, 0x0a},
|
|
+ {0x9d17, 0x35},
|
|
+ {0x9d1d, 0x31},
|
|
+ {0x9d29, 0x50},
|
|
+ {0x9d3b, 0x2f},
|
|
+ {0x9d41, 0x6b},
|
|
+ {0x9d47, 0x42},
|
|
+ {0x9d4d, 0x5a},
|
|
+ {0x9d6b, 0x00},
|
|
+ {0x9d71, 0xc8},
|
|
+ {0x9d73, 0x32},
|
|
+ {0x9d75, 0x04},
|
|
+ {0x9d7d, 0x42},
|
|
+ {0x9d83, 0x5a},
|
|
+ {0x9d94, 0x3f},
|
|
+ {0x9d95, 0x3f},
|
|
+ {0x9d96, 0x3f},
|
|
+ {0x9d97, 0x00},
|
|
+ {0x9d98, 0x00},
|
|
+ {0x9d99, 0x00},
|
|
+ {0x9d9a, 0x3f},
|
|
+ {0x9d9b, 0x3f},
|
|
+ {0x9d9c, 0x3f},
|
|
+ {0x9d9d, 0x1f},
|
|
+ {0x9d9e, 0x1f},
|
|
+ {0x9d9f, 0x1f},
|
|
+ {0x9da0, 0x0f},
|
|
+ {0x9da1, 0x0f},
|
|
+ {0x9da2, 0x0f},
|
|
+ {0x9da3, 0x00},
|
|
+ {0x9da4, 0x00},
|
|
+ {0x9da5, 0x00},
|
|
+ {0x9da6, 0x1e},
|
|
+ {0x9da7, 0x1e},
|
|
+ {0x9da8, 0x1e},
|
|
+ {0x9da9, 0x00},
|
|
+ {0x9daa, 0x00},
|
|
+ {0x9dab, 0x00},
|
|
+ {0x9dac, 0x09},
|
|
+ {0x9dad, 0x09},
|
|
+ {0x9dae, 0x09},
|
|
+ {0x9dc9, 0x0a},
|
|
+ {0x9dcb, 0x0a},
|
|
+ {0x9dcd, 0x0a},
|
|
+ {0x9e17, 0x35},
|
|
+ {0x9e1d, 0x31},
|
|
+ {0x9e29, 0x50},
|
|
+ {0x9e3b, 0x2f},
|
|
+ {0x9e41, 0x6b},
|
|
+ {0x9e47, 0x2d},
|
|
+ {0x9e4d, 0x40},
|
|
+ {0x9e6b, 0x00},
|
|
+ {0x9e71, 0xc8},
|
|
+ {0x9e73, 0x32},
|
|
+ {0x9e75, 0x04},
|
|
+ {0x9e94, 0x0f},
|
|
+ {0x9e95, 0x0f},
|
|
+ {0x9e96, 0x0f},
|
|
+ {0x9e97, 0x00},
|
|
+ {0x9e98, 0x00},
|
|
+ {0x9e99, 0x00},
|
|
+ {0x9ea0, 0x0f},
|
|
+ {0x9ea1, 0x0f},
|
|
+ {0x9ea2, 0x0f},
|
|
+ {0x9ea3, 0x00},
|
|
+ {0x9ea4, 0x00},
|
|
+ {0x9ea5, 0x00},
|
|
+ {0x9ea6, 0x3f},
|
|
+ {0x9ea7, 0x3f},
|
|
+ {0x9ea8, 0x3f},
|
|
+ {0x9ea9, 0x00},
|
|
+ {0x9eaa, 0x00},
|
|
+ {0x9eab, 0x00},
|
|
+ {0x9eac, 0x09},
|
|
+ {0x9ead, 0x09},
|
|
+ {0x9eae, 0x09},
|
|
+ {0x9ec9, 0x0a},
|
|
+ {0x9ecb, 0x0a},
|
|
+ {0x9ecd, 0x0a},
|
|
+ {0x9f17, 0x35},
|
|
+ {0x9f1d, 0x31},
|
|
+ {0x9f29, 0x50},
|
|
+ {0x9f3b, 0x2f},
|
|
+ {0x9f41, 0x6b},
|
|
+ {0x9f47, 0x42},
|
|
+ {0x9f4d, 0x5a},
|
|
+ {0x9f6b, 0x00},
|
|
+ {0x9f71, 0xc8},
|
|
+ {0x9f73, 0x32},
|
|
+ {0x9f75, 0x04},
|
|
+ {0x9f94, 0x0f},
|
|
+ {0x9f95, 0x0f},
|
|
+ {0x9f96, 0x0f},
|
|
+ {0x9f97, 0x00},
|
|
+ {0x9f98, 0x00},
|
|
+ {0x9f99, 0x00},
|
|
+ {0x9f9a, 0x2f},
|
|
+ {0x9f9b, 0x2f},
|
|
+ {0x9f9c, 0x2f},
|
|
+ {0x9f9d, 0x00},
|
|
+ {0x9f9e, 0x00},
|
|
+ {0x9f9f, 0x00},
|
|
+ {0x9fa0, 0x0f},
|
|
+ {0x9fa1, 0x0f},
|
|
+ {0x9fa2, 0x0f},
|
|
+ {0x9fa3, 0x00},
|
|
+ {0x9fa4, 0x00},
|
|
+ {0x9fa5, 0x00},
|
|
+ {0x9fa6, 0x1e},
|
|
+ {0x9fa7, 0x1e},
|
|
+ {0x9fa8, 0x1e},
|
|
+ {0x9fa9, 0x00},
|
|
+ {0x9faa, 0x00},
|
|
+ {0x9fab, 0x00},
|
|
+ {0x9fac, 0x09},
|
|
+ {0x9fad, 0x09},
|
|
+ {0x9fae, 0x09},
|
|
+ {0x9fc9, 0x0a},
|
|
+ {0x9fcb, 0x0a},
|
|
+ {0x9fcd, 0x0a},
|
|
+ {0xa14b, 0xff},
|
|
+ {0xa151, 0x0c},
|
|
+ {0xa153, 0x50},
|
|
+ {0xa155, 0x02},
|
|
+ {0xa157, 0x00},
|
|
+ {0xa1ad, 0xff},
|
|
+ {0xa1b3, 0x0c},
|
|
+ {0xa1b5, 0x50},
|
|
+ {0xa1b9, 0x00},
|
|
+ {0xa24b, 0xff},
|
|
+ {0xa257, 0x00},
|
|
+ {0xa2ad, 0xff},
|
|
+ {0xa2b9, 0x00},
|
|
+ {0xb21f, 0x04},
|
|
+ {0xb35c, 0x00},
|
|
+ {0xb35e, 0x08},
|
|
+ {0x0112, 0x0c},
|
|
+ {0x0113, 0x0c},
|
|
+ {0x0114, 0x01},
|
|
+ {0x0350, 0x00},
|
|
+ {0xbcf1, 0x02},
|
|
+ {0x3ff9, 0x01},
|
|
+};
|
|
+
|
|
+/* 12 mpix 10fps */
|
|
+static const struct imx477_reg mode_4056x3040_regs[] = {
|
|
+ {0x0342, 0x5d},
|
|
+ {0x0343, 0xc0},
|
|
+ {0x0344, 0x00},
|
|
+ {0x0345, 0x00},
|
|
+ {0x0346, 0x00},
|
|
+ {0x0347, 0x00},
|
|
+ {0x0348, 0x0f},
|
|
+ {0x0349, 0xd7},
|
|
+ {0x034a, 0x0b},
|
|
+ {0x034b, 0xdf},
|
|
+ {0x00e3, 0x00},
|
|
+ {0x00e4, 0x00},
|
|
+ {0x00fc, 0x0a},
|
|
+ {0x00fd, 0x0a},
|
|
+ {0x00fe, 0x0a},
|
|
+ {0x00ff, 0x0a},
|
|
+ {0x0220, 0x00},
|
|
+ {0x0221, 0x11},
|
|
+ {0x0381, 0x01},
|
|
+ {0x0383, 0x01},
|
|
+ {0x0385, 0x01},
|
|
+ {0x0387, 0x01},
|
|
+ {0x0900, 0x00},
|
|
+ {0x0901, 0x11},
|
|
+ {0x0902, 0x02},
|
|
+ {0x3140, 0x02},
|
|
+ {0x3c00, 0x00},
|
|
+ {0x3c01, 0x03},
|
|
+ {0x3c02, 0xa2},
|
|
+ {0x3f0d, 0x01},
|
|
+ {0x5748, 0x07},
|
|
+ {0x5749, 0xff},
|
|
+ {0x574a, 0x00},
|
|
+ {0x574b, 0x00},
|
|
+ {0x7b75, 0x0a},
|
|
+ {0x7b76, 0x0c},
|
|
+ {0x7b77, 0x07},
|
|
+ {0x7b78, 0x06},
|
|
+ {0x7b79, 0x3c},
|
|
+ {0x7b53, 0x01},
|
|
+ {0x9369, 0x5a},
|
|
+ {0x936b, 0x55},
|
|
+ {0x936d, 0x28},
|
|
+ {0x9304, 0x00},
|
|
+ {0x9305, 0x00},
|
|
+ {0x9e9a, 0x2f},
|
|
+ {0x9e9b, 0x2f},
|
|
+ {0x9e9c, 0x2f},
|
|
+ {0x9e9d, 0x00},
|
|
+ {0x9e9e, 0x00},
|
|
+ {0x9e9f, 0x00},
|
|
+ {0xa2a9, 0x60},
|
|
+ {0xa2b7, 0x00},
|
|
+ {0x0401, 0x00},
|
|
+ {0x0404, 0x00},
|
|
+ {0x0405, 0x10},
|
|
+ {0x0408, 0x00},
|
|
+ {0x0409, 0x00},
|
|
+ {0x040a, 0x00},
|
|
+ {0x040b, 0x00},
|
|
+ {0x040c, 0x0f},
|
|
+ {0x040d, 0xd8},
|
|
+ {0x040e, 0x0b},
|
|
+ {0x040f, 0xe0},
|
|
+ {0x034c, 0x0f},
|
|
+ {0x034d, 0xd8},
|
|
+ {0x034e, 0x0b},
|
|
+ {0x034f, 0xe0},
|
|
+ {0x0301, 0x05},
|
|
+ {0x0303, 0x02},
|
|
+ {0x0305, 0x04},
|
|
+ {0x0306, 0x01},
|
|
+ {0x0307, 0x5e},
|
|
+ {0x0309, 0x0c},
|
|
+ {0x030b, 0x02},
|
|
+ {0x030d, 0x02},
|
|
+ {0x030e, 0x00},
|
|
+ {0x030f, 0x96},
|
|
+ {0x0310, 0x01},
|
|
+ {0x0820, 0x07},
|
|
+ {0x0821, 0x08},
|
|
+ {0x0822, 0x00},
|
|
+ {0x0823, 0x00},
|
|
+ {0x080a, 0x00},
|
|
+ {0x080b, 0x7f},
|
|
+ {0x080c, 0x00},
|
|
+ {0x080d, 0x4f},
|
|
+ {0x080e, 0x00},
|
|
+ {0x080f, 0x77},
|
|
+ {0x0810, 0x00},
|
|
+ {0x0811, 0x5f},
|
|
+ {0x0812, 0x00},
|
|
+ {0x0813, 0x57},
|
|
+ {0x0814, 0x00},
|
|
+ {0x0815, 0x4f},
|
|
+ {0x0816, 0x01},
|
|
+ {0x0817, 0x27},
|
|
+ {0x0818, 0x00},
|
|
+ {0x0819, 0x3f},
|
|
+ {0xe04c, 0x00},
|
|
+ {0xe04d, 0x7f},
|
|
+ {0xe04e, 0x00},
|
|
+ {0xe04f, 0x1f},
|
|
+ {0x3e20, 0x01},
|
|
+ {0x3e37, 0x00},
|
|
+ {0x3f50, 0x00},
|
|
+ {0x3f56, 0x02},
|
|
+ {0x3f57, 0xae},
|
|
+};
|
|
+
|
|
+/* 2x2 binned. 40fps */
|
|
+static const struct imx477_reg mode_2028x1520_regs[] = {
|
|
+ {0x0342, 0x31},
|
|
+ {0x0343, 0xc4},
|
|
+ {0x0344, 0x00},
|
|
+ {0x0345, 0x00},
|
|
+ {0x0346, 0x00},
|
|
+ {0x0347, 0x00},
|
|
+ {0x0348, 0x0f},
|
|
+ {0x0349, 0xd7},
|
|
+ {0x034a, 0x0b},
|
|
+ {0x034b, 0xdf},
|
|
+ {0x0220, 0x00},
|
|
+ {0x0221, 0x11},
|
|
+ {0x0381, 0x01},
|
|
+ {0x0383, 0x01},
|
|
+ {0x0385, 0x01},
|
|
+ {0x0387, 0x01},
|
|
+ {0x0900, 0x01},
|
|
+ {0x0901, 0x12},
|
|
+ {0x0902, 0x02},
|
|
+ {0x3140, 0x02},
|
|
+ {0x3c00, 0x00},
|
|
+ {0x3c01, 0x03},
|
|
+ {0x3c02, 0xa2},
|
|
+ {0x3f0d, 0x01},
|
|
+ {0x5748, 0x07},
|
|
+ {0x5749, 0xff},
|
|
+ {0x574a, 0x00},
|
|
+ {0x574b, 0x00},
|
|
+ {0x7b53, 0x01},
|
|
+ {0x9369, 0x73},
|
|
+ {0x936b, 0x64},
|
|
+ {0x936d, 0x5f},
|
|
+ {0x9304, 0x00},
|
|
+ {0x9305, 0x00},
|
|
+ {0x9e9a, 0x2f},
|
|
+ {0x9e9b, 0x2f},
|
|
+ {0x9e9c, 0x2f},
|
|
+ {0x9e9d, 0x00},
|
|
+ {0x9e9e, 0x00},
|
|
+ {0x9e9f, 0x00},
|
|
+ {0xa2a9, 0x60},
|
|
+ {0xa2b7, 0x00},
|
|
+ {0x0401, 0x01},
|
|
+ {0x0404, 0x00},
|
|
+ {0x0405, 0x20},
|
|
+ {0x0408, 0x00},
|
|
+ {0x0409, 0x00},
|
|
+ {0x040a, 0x00},
|
|
+ {0x040b, 0x00},
|
|
+ {0x040c, 0x0f},
|
|
+ {0x040d, 0xd8},
|
|
+ {0x040e, 0x0b},
|
|
+ {0x040f, 0xe0},
|
|
+ {0x034c, 0x07},
|
|
+ {0x034d, 0xec},
|
|
+ {0x034e, 0x05},
|
|
+ {0x034f, 0xf0},
|
|
+ {0x0301, 0x05},
|
|
+ {0x0303, 0x02},
|
|
+ {0x0305, 0x04},
|
|
+ {0x0306, 0x01},
|
|
+ {0x0307, 0x5e},
|
|
+ {0x0309, 0x0c},
|
|
+ {0x030b, 0x02},
|
|
+ {0x030d, 0x02},
|
|
+ {0x030e, 0x00},
|
|
+ {0x030f, 0x96},
|
|
+ {0x0310, 0x01},
|
|
+ {0x0820, 0x07},
|
|
+ {0x0821, 0x08},
|
|
+ {0x0822, 0x00},
|
|
+ {0x0823, 0x00},
|
|
+ {0x080a, 0x00},
|
|
+ {0x080b, 0x7f},
|
|
+ {0x080c, 0x00},
|
|
+ {0x080d, 0x4f},
|
|
+ {0x080e, 0x00},
|
|
+ {0x080f, 0x77},
|
|
+ {0x0810, 0x00},
|
|
+ {0x0811, 0x5f},
|
|
+ {0x0812, 0x00},
|
|
+ {0x0813, 0x57},
|
|
+ {0x0814, 0x00},
|
|
+ {0x0815, 0x4f},
|
|
+ {0x0816, 0x01},
|
|
+ {0x0817, 0x27},
|
|
+ {0x0818, 0x00},
|
|
+ {0x0819, 0x3f},
|
|
+ {0xe04c, 0x00},
|
|
+ {0xe04d, 0x7f},
|
|
+ {0xe04e, 0x00},
|
|
+ {0xe04f, 0x1f},
|
|
+ {0x3e20, 0x01},
|
|
+ {0x3e37, 0x00},
|
|
+ {0x3f50, 0x00},
|
|
+ {0x3f56, 0x01},
|
|
+ {0x3f57, 0x6c},
|
|
+};
|
|
+
|
|
+/* 1080p cropped mode */
|
|
+static const struct imx477_reg mode_2028x1080_regs[] = {
|
|
+ {0x0342, 0x31},
|
|
+ {0x0343, 0xc4},
|
|
+ {0x0344, 0x00},
|
|
+ {0x0345, 0x00},
|
|
+ {0x0346, 0x01},
|
|
+ {0x0347, 0xb8},
|
|
+ {0x0348, 0x0f},
|
|
+ {0x0349, 0xd7},
|
|
+ {0x034a, 0x0a},
|
|
+ {0x034b, 0x27},
|
|
+ {0x0220, 0x00},
|
|
+ {0x0221, 0x11},
|
|
+ {0x0381, 0x01},
|
|
+ {0x0383, 0x01},
|
|
+ {0x0385, 0x01},
|
|
+ {0x0387, 0x01},
|
|
+ {0x0900, 0x01},
|
|
+ {0x0901, 0x12},
|
|
+ {0x0902, 0x02},
|
|
+ {0x3140, 0x02},
|
|
+ {0x3c00, 0x00},
|
|
+ {0x3c01, 0x03},
|
|
+ {0x3c02, 0xa2},
|
|
+ {0x3f0d, 0x01},
|
|
+ {0x5748, 0x07},
|
|
+ {0x5749, 0xff},
|
|
+ {0x574a, 0x00},
|
|
+ {0x574b, 0x00},
|
|
+ {0x7b53, 0x01},
|
|
+ {0x9369, 0x73},
|
|
+ {0x936b, 0x64},
|
|
+ {0x936d, 0x5f},
|
|
+ {0x9304, 0x00},
|
|
+ {0x9305, 0x00},
|
|
+ {0x9e9a, 0x2f},
|
|
+ {0x9e9b, 0x2f},
|
|
+ {0x9e9c, 0x2f},
|
|
+ {0x9e9d, 0x00},
|
|
+ {0x9e9e, 0x00},
|
|
+ {0x9e9f, 0x00},
|
|
+ {0xa2a9, 0x60},
|
|
+ {0xa2b7, 0x00},
|
|
+ {0x0401, 0x01},
|
|
+ {0x0404, 0x00},
|
|
+ {0x0405, 0x20},
|
|
+ {0x0408, 0x00},
|
|
+ {0x0409, 0x00},
|
|
+ {0x040a, 0x00},
|
|
+ {0x040b, 0x00},
|
|
+ {0x040c, 0x0f},
|
|
+ {0x040d, 0xd8},
|
|
+ {0x040e, 0x04},
|
|
+ {0x040f, 0x38},
|
|
+ {0x034c, 0x07},
|
|
+ {0x034d, 0xec},
|
|
+ {0x034e, 0x04},
|
|
+ {0x034f, 0x38},
|
|
+ {0x0301, 0x05},
|
|
+ {0x0303, 0x02},
|
|
+ {0x0305, 0x04},
|
|
+ {0x0306, 0x01},
|
|
+ {0x0307, 0x5e},
|
|
+ {0x0309, 0x0c},
|
|
+ {0x030b, 0x02},
|
|
+ {0x030d, 0x02},
|
|
+ {0x030e, 0x00},
|
|
+ {0x030f, 0x96},
|
|
+ {0x0310, 0x01},
|
|
+ {0x0820, 0x07},
|
|
+ {0x0821, 0x08},
|
|
+ {0x0822, 0x00},
|
|
+ {0x0823, 0x00},
|
|
+ {0x080a, 0x00},
|
|
+ {0x080b, 0x7f},
|
|
+ {0x080c, 0x00},
|
|
+ {0x080d, 0x4f},
|
|
+ {0x080e, 0x00},
|
|
+ {0x080f, 0x77},
|
|
+ {0x0810, 0x00},
|
|
+ {0x0811, 0x5f},
|
|
+ {0x0812, 0x00},
|
|
+ {0x0813, 0x57},
|
|
+ {0x0814, 0x00},
|
|
+ {0x0815, 0x4f},
|
|
+ {0x0816, 0x01},
|
|
+ {0x0817, 0x27},
|
|
+ {0x0818, 0x00},
|
|
+ {0x0819, 0x3f},
|
|
+ {0xe04c, 0x00},
|
|
+ {0xe04d, 0x7f},
|
|
+ {0xe04e, 0x00},
|
|
+ {0xe04f, 0x1f},
|
|
+ {0x3e20, 0x01},
|
|
+ {0x3e37, 0x00},
|
|
+ {0x3f50, 0x00},
|
|
+ {0x3f56, 0x01},
|
|
+ {0x3f57, 0x6c},
|
|
+};
|
|
+
|
|
+/* 4x4 binned. 120fps */
|
|
+static const struct imx477_reg mode_1332x990_regs[] = {
|
|
+ {0x420b, 0x01},
|
|
+ {0x990c, 0x00},
|
|
+ {0x990d, 0x08},
|
|
+ {0x9956, 0x8c},
|
|
+ {0x9957, 0x64},
|
|
+ {0x9958, 0x50},
|
|
+ {0x9a48, 0x06},
|
|
+ {0x9a49, 0x06},
|
|
+ {0x9a4a, 0x06},
|
|
+ {0x9a4b, 0x06},
|
|
+ {0x9a4c, 0x06},
|
|
+ {0x9a4d, 0x06},
|
|
+ {0x0112, 0x0a},
|
|
+ {0x0113, 0x0a},
|
|
+ {0x0114, 0x01},
|
|
+ {0x0342, 0x1a},
|
|
+ {0x0343, 0x08},
|
|
+ {0x0340, 0x04},
|
|
+ {0x0341, 0x1a},
|
|
+ {0x0344, 0x00},
|
|
+ {0x0345, 0x00},
|
|
+ {0x0346, 0x02},
|
|
+ {0x0347, 0x10},
|
|
+ {0x0348, 0x0f},
|
|
+ {0x0349, 0xd7},
|
|
+ {0x034a, 0x09},
|
|
+ {0x034b, 0xcf},
|
|
+ {0x00e3, 0x00},
|
|
+ {0x00e4, 0x00},
|
|
+ {0x00fc, 0x0a},
|
|
+ {0x00fd, 0x0a},
|
|
+ {0x00fe, 0x0a},
|
|
+ {0x00ff, 0x0a},
|
|
+ {0xe013, 0x00},
|
|
+ {0x0220, 0x00},
|
|
+ {0x0221, 0x11},
|
|
+ {0x0381, 0x01},
|
|
+ {0x0383, 0x01},
|
|
+ {0x0385, 0x01},
|
|
+ {0x0387, 0x01},
|
|
+ {0x0900, 0x01},
|
|
+ {0x0901, 0x22},
|
|
+ {0x0902, 0x02},
|
|
+ {0x3140, 0x02},
|
|
+ {0x3c00, 0x00},
|
|
+ {0x3c01, 0x01},
|
|
+ {0x3c02, 0x9c},
|
|
+ {0x3f0d, 0x00},
|
|
+ {0x5748, 0x00},
|
|
+ {0x5749, 0x00},
|
|
+ {0x574a, 0x00},
|
|
+ {0x574b, 0xa4},
|
|
+ {0x7b75, 0x0e},
|
|
+ {0x7b76, 0x09},
|
|
+ {0x7b77, 0x08},
|
|
+ {0x7b78, 0x06},
|
|
+ {0x7b79, 0x34},
|
|
+ {0x7b53, 0x00},
|
|
+ {0x9369, 0x73},
|
|
+ {0x936b, 0x64},
|
|
+ {0x936d, 0x5f},
|
|
+ {0x9304, 0x03},
|
|
+ {0x9305, 0x80},
|
|
+ {0x9e9a, 0x2f},
|
|
+ {0x9e9b, 0x2f},
|
|
+ {0x9e9c, 0x2f},
|
|
+ {0x9e9d, 0x00},
|
|
+ {0x9e9e, 0x00},
|
|
+ {0x9e9f, 0x00},
|
|
+ {0xa2a9, 0x27},
|
|
+ {0xa2b7, 0x03},
|
|
+ {0x0401, 0x00},
|
|
+ {0x0404, 0x00},
|
|
+ {0x0405, 0x10},
|
|
+ {0x0408, 0x01},
|
|
+ {0x0409, 0x5c},
|
|
+ {0x040a, 0x00},
|
|
+ {0x040b, 0x00},
|
|
+ {0x040c, 0x05},
|
|
+ {0x040d, 0x34},
|
|
+ {0x040e, 0x03},
|
|
+ {0x040f, 0xde},
|
|
+ {0x034c, 0x05},
|
|
+ {0x034d, 0x34},
|
|
+ {0x034e, 0x03},
|
|
+ {0x034f, 0xde},
|
|
+ {0x0301, 0x05},
|
|
+ {0x0303, 0x02},
|
|
+ {0x0305, 0x02},
|
|
+ {0x0306, 0x00},
|
|
+ {0x0307, 0xaf},
|
|
+ {0x0309, 0x0a},
|
|
+ {0x030b, 0x02},
|
|
+ {0x030d, 0x02},
|
|
+ {0x030e, 0x00},
|
|
+ {0x030f, 0x96},
|
|
+ {0x0310, 0x01},
|
|
+ {0x0820, 0x07},
|
|
+ {0x0821, 0x08},
|
|
+ {0x0822, 0x00},
|
|
+ {0x0823, 0x00},
|
|
+ {0x080a, 0x00},
|
|
+ {0x080b, 0x7f},
|
|
+ {0x080c, 0x00},
|
|
+ {0x080d, 0x4f},
|
|
+ {0x080e, 0x00},
|
|
+ {0x080f, 0x77},
|
|
+ {0x0810, 0x00},
|
|
+ {0x0811, 0x5f},
|
|
+ {0x0812, 0x00},
|
|
+ {0x0813, 0x57},
|
|
+ {0x0814, 0x00},
|
|
+ {0x0815, 0x4f},
|
|
+ {0x0816, 0x01},
|
|
+ {0x0817, 0x27},
|
|
+ {0x0818, 0x00},
|
|
+ {0x0819, 0x3f},
|
|
+ {0xe04c, 0x00},
|
|
+ {0xe04d, 0x5f},
|
|
+ {0xe04e, 0x00},
|
|
+ {0xe04f, 0x1f},
|
|
+ {0x3e20, 0x01},
|
|
+ {0x3e37, 0x00},
|
|
+ {0x3f50, 0x00},
|
|
+ {0x3f56, 0x00},
|
|
+ {0x3f57, 0xbf},
|
|
+};
|
|
+
|
|
+/* Mode configs */
|
|
+static const struct imx477_mode supported_modes_12bit[] = {
|
|
+ {
|
|
+ /* 12MPix 10fps mode */
|
|
+ .width = 4056,
|
|
+ .height = 3040,
|
|
+ .line_length_pix = 0x5dc0,
|
|
+ .crop = {
|
|
+ .left = IMX477_PIXEL_ARRAY_LEFT,
|
|
+ .top = IMX477_PIXEL_ARRAY_TOP,
|
|
+ .width = 4056,
|
|
+ .height = 3040,
|
|
+ },
|
|
+ .timeperframe_min = {
|
|
+ .numerator = 100,
|
|
+ .denominator = 1000
|
|
+ },
|
|
+ .timeperframe_default = {
|
|
+ .numerator = 100,
|
|
+ .denominator = 1000
|
|
+ },
|
|
+ .reg_list = {
|
|
+ .num_of_regs = ARRAY_SIZE(mode_4056x3040_regs),
|
|
+ .regs = mode_4056x3040_regs,
|
|
+ },
|
|
+ },
|
|
+ {
|
|
+ /* 2x2 binned 40fps mode */
|
|
+ .width = 2028,
|
|
+ .height = 1520,
|
|
+ .line_length_pix = 0x31c4,
|
|
+ .crop = {
|
|
+ .left = IMX477_PIXEL_ARRAY_LEFT,
|
|
+ .top = IMX477_PIXEL_ARRAY_TOP,
|
|
+ .width = 4056,
|
|
+ .height = 3040,
|
|
+ },
|
|
+ .timeperframe_min = {
|
|
+ .numerator = 100,
|
|
+ .denominator = 4000
|
|
+ },
|
|
+ .timeperframe_default = {
|
|
+ .numerator = 100,
|
|
+ .denominator = 3000
|
|
+ },
|
|
+ .reg_list = {
|
|
+ .num_of_regs = ARRAY_SIZE(mode_2028x1520_regs),
|
|
+ .regs = mode_2028x1520_regs,
|
|
+ },
|
|
+ },
|
|
+ {
|
|
+ /* 1080p 50fps cropped mode */
|
|
+ .width = 2028,
|
|
+ .height = 1080,
|
|
+ .line_length_pix = 0x31c4,
|
|
+ .crop = {
|
|
+ .left = IMX477_PIXEL_ARRAY_LEFT,
|
|
+ .top = IMX477_PIXEL_ARRAY_TOP + 440,
|
|
+ .width = 4056,
|
|
+ .height = 2160,
|
|
+ },
|
|
+ .timeperframe_min = {
|
|
+ .numerator = 100,
|
|
+ .denominator = 5000
|
|
+ },
|
|
+ .timeperframe_default = {
|
|
+ .numerator = 100,
|
|
+ .denominator = 3000
|
|
+ },
|
|
+ .reg_list = {
|
|
+ .num_of_regs = ARRAY_SIZE(mode_2028x1080_regs),
|
|
+ .regs = mode_2028x1080_regs,
|
|
+ },
|
|
+ }
|
|
+};
|
|
+
|
|
+static const struct imx477_mode supported_modes_10bit[] = {
|
|
+ {
|
|
+ /* 120fps. 2x2 binned and cropped */
|
|
+ .width = 1332,
|
|
+ .height = 990,
|
|
+ .line_length_pix = 6664,
|
|
+ .crop = {
|
|
+ /*
|
|
+ * FIXME: the analog crop rectangle is actually
|
|
+ * programmed with a horizontal displacement of 0
|
|
+ * pixels, not 4. It gets shrunk after going through
|
|
+ * the scaler. Move this information to the compose
|
|
+ * rectangle once the driver is expanded to represent
|
|
+ * its processing blocks with multiple subdevs.
|
|
+ */
|
|
+ .left = IMX477_PIXEL_ARRAY_LEFT + 696,
|
|
+ .top = IMX477_PIXEL_ARRAY_TOP + 528,
|
|
+ .width = 2664,
|
|
+ .height = 1980,
|
|
+ },
|
|
+ .timeperframe_min = {
|
|
+ .numerator = 100,
|
|
+ .denominator = 12000
|
|
+ },
|
|
+ .timeperframe_default = {
|
|
+ .numerator = 100,
|
|
+ .denominator = 12000
|
|
+ },
|
|
+ .reg_list = {
|
|
+ .num_of_regs = ARRAY_SIZE(mode_1332x990_regs),
|
|
+ .regs = mode_1332x990_regs,
|
|
+ }
|
|
+ }
|
|
+};
|
|
+
|
|
+/*
|
|
+ * The supported formats.
|
|
+ * This table MUST contain 4 entries per format, to cover the various flip
|
|
+ * combinations in the order
|
|
+ * - no flip
|
|
+ * - h flip
|
|
+ * - v flip
|
|
+ * - h&v flips
|
|
+ */
|
|
+static const u32 codes[] = {
|
|
+ /* 12-bit modes. */
|
|
+ MEDIA_BUS_FMT_SRGGB12_1X12,
|
|
+ MEDIA_BUS_FMT_SGRBG12_1X12,
|
|
+ MEDIA_BUS_FMT_SGBRG12_1X12,
|
|
+ MEDIA_BUS_FMT_SBGGR12_1X12,
|
|
+ /* 10-bit modes. */
|
|
+ MEDIA_BUS_FMT_SRGGB10_1X10,
|
|
+ MEDIA_BUS_FMT_SGRBG10_1X10,
|
|
+ MEDIA_BUS_FMT_SGBRG10_1X10,
|
|
+ MEDIA_BUS_FMT_SBGGR10_1X10,
|
|
+};
|
|
+
|
|
+static const char * const imx477_test_pattern_menu[] = {
|
|
+ "Disabled",
|
|
+ "Color Bars",
|
|
+ "Solid Color",
|
|
+ "Grey Color Bars",
|
|
+ "PN9"
|
|
+};
|
|
+
|
|
+static const int imx477_test_pattern_val[] = {
|
|
+ IMX477_TEST_PATTERN_DISABLE,
|
|
+ IMX477_TEST_PATTERN_COLOR_BARS,
|
|
+ IMX477_TEST_PATTERN_SOLID_COLOR,
|
|
+ IMX477_TEST_PATTERN_GREY_COLOR,
|
|
+ IMX477_TEST_PATTERN_PN9,
|
|
+};
|
|
+
|
|
+/* regulator supplies */
|
|
+static const char * const imx477_supply_name[] = {
|
|
+ /* Supplies can be enabled in any order */
|
|
+ "VANA", /* Analog (2.8V) supply */
|
|
+ "VDIG", /* Digital Core (1.05V) supply */
|
|
+ "VDDL", /* IF (1.8V) supply */
|
|
+};
|
|
+
|
|
+#define IMX477_NUM_SUPPLIES ARRAY_SIZE(imx477_supply_name)
|
|
+
|
|
+/*
|
|
+ * Initialisation delay between XCLR low->high and the moment when the sensor
|
|
+ * can start capture (i.e. can leave software standby), given by T7 in the
|
|
+ * datasheet is 8ms. This does include I2C setup time as well.
|
|
+ *
|
|
+ * Note, that delay between XCLR low->high and reading the CCI ID register (T6
|
|
+ * in the datasheet) is much smaller - 600us.
|
|
+ */
|
|
+#define IMX477_XCLR_MIN_DELAY_US 8000
|
|
+#define IMX477_XCLR_DELAY_RANGE_US 1000
|
|
+
|
|
+struct imx477_compatible_data {
|
|
+ unsigned int chip_id;
|
|
+ struct imx477_reg_list extra_regs;
|
|
+};
|
|
+
|
|
+struct imx477 {
|
|
+ struct v4l2_subdev sd;
|
|
+ struct media_pad pad[NUM_PADS];
|
|
+
|
|
+ unsigned int fmt_code;
|
|
+
|
|
+ struct clk *xclk;
|
|
+ u32 xclk_freq;
|
|
+
|
|
+ struct gpio_desc *reset_gpio;
|
|
+ struct regulator_bulk_data supplies[IMX477_NUM_SUPPLIES];
|
|
+
|
|
+ struct v4l2_ctrl_handler ctrl_handler;
|
|
+ /* V4L2 Controls */
|
|
+ struct v4l2_ctrl *pixel_rate;
|
|
+ struct v4l2_ctrl *exposure;
|
|
+ struct v4l2_ctrl *vflip;
|
|
+ struct v4l2_ctrl *hflip;
|
|
+ struct v4l2_ctrl *vblank;
|
|
+ struct v4l2_ctrl *hblank;
|
|
+
|
|
+ /* Current mode */
|
|
+ const struct imx477_mode *mode;
|
|
+
|
|
+ /*
|
|
+ * Mutex for serialized access:
|
|
+ * Protect sensor module set pad format and start/stop streaming safely.
|
|
+ */
|
|
+ struct mutex mutex;
|
|
+
|
|
+ /* Streaming on/off */
|
|
+ bool streaming;
|
|
+
|
|
+ /* Rewrite common registers on stream on? */
|
|
+ bool common_regs_written;
|
|
+
|
|
+ /* Current long exposure factor in use. Set through V4L2_CID_VBLANK */
|
|
+ unsigned int long_exp_shift;
|
|
+
|
|
+ /* Any extra information related to different compatible sensors */
|
|
+ const struct imx477_compatible_data *compatible_data;
|
|
+};
|
|
+
|
|
+static inline struct imx477 *to_imx477(struct v4l2_subdev *_sd)
|
|
+{
|
|
+ return container_of(_sd, struct imx477, sd);
|
|
+}
|
|
+
|
|
+static inline void get_mode_table(unsigned int code,
|
|
+ const struct imx477_mode **mode_list,
|
|
+ unsigned int *num_modes)
|
|
+{
|
|
+ switch (code) {
|
|
+ /* 12-bit */
|
|
+ case MEDIA_BUS_FMT_SRGGB12_1X12:
|
|
+ case MEDIA_BUS_FMT_SGRBG12_1X12:
|
|
+ case MEDIA_BUS_FMT_SGBRG12_1X12:
|
|
+ case MEDIA_BUS_FMT_SBGGR12_1X12:
|
|
+ *mode_list = supported_modes_12bit;
|
|
+ *num_modes = ARRAY_SIZE(supported_modes_12bit);
|
|
+ break;
|
|
+ /* 10-bit */
|
|
+ case MEDIA_BUS_FMT_SRGGB10_1X10:
|
|
+ case MEDIA_BUS_FMT_SGRBG10_1X10:
|
|
+ case MEDIA_BUS_FMT_SGBRG10_1X10:
|
|
+ case MEDIA_BUS_FMT_SBGGR10_1X10:
|
|
+ *mode_list = supported_modes_10bit;
|
|
+ *num_modes = ARRAY_SIZE(supported_modes_10bit);
|
|
+ break;
|
|
+ default:
|
|
+ *mode_list = NULL;
|
|
+ *num_modes = 0;
|
|
+ }
|
|
+}
|
|
+
|
|
+/* Read registers up to 2 at a time */
|
|
+static int imx477_read_reg(struct imx477 *imx477, u16 reg, u32 len, u32 *val)
|
|
+{
|
|
+ struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
|
|
+ struct i2c_msg msgs[2];
|
|
+ u8 addr_buf[2] = { reg >> 8, reg & 0xff };
|
|
+ u8 data_buf[4] = { 0, };
|
|
+ int ret;
|
|
+
|
|
+ if (len > 4)
|
|
+ return -EINVAL;
|
|
+
|
|
+ /* Write register address */
|
|
+ msgs[0].addr = client->addr;
|
|
+ msgs[0].flags = 0;
|
|
+ msgs[0].len = ARRAY_SIZE(addr_buf);
|
|
+ msgs[0].buf = addr_buf;
|
|
+
|
|
+ /* Read data from register */
|
|
+ msgs[1].addr = client->addr;
|
|
+ msgs[1].flags = I2C_M_RD;
|
|
+ msgs[1].len = len;
|
|
+ msgs[1].buf = &data_buf[4 - len];
|
|
+
|
|
+ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
+ if (ret != ARRAY_SIZE(msgs))
|
|
+ return -EIO;
|
|
+
|
|
+ *val = get_unaligned_be32(data_buf);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/* Write registers up to 2 at a time */
|
|
+static int imx477_write_reg(struct imx477 *imx477, u16 reg, u32 len, u32 val)
|
|
+{
|
|
+ struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
|
|
+ u8 buf[6];
|
|
+
|
|
+ if (len > 4)
|
|
+ return -EINVAL;
|
|
+
|
|
+ put_unaligned_be16(reg, buf);
|
|
+ put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
|
|
+ if (i2c_master_send(client, buf, len + 2) != len + 2)
|
|
+ return -EIO;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/* Write a list of registers */
|
|
+static int imx477_write_regs(struct imx477 *imx477,
|
|
+ const struct imx477_reg *regs, u32 len)
|
|
+{
|
|
+ struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
|
|
+ unsigned int i;
|
|
+ int ret;
|
|
+
|
|
+ for (i = 0; i < len; i++) {
|
|
+ ret = imx477_write_reg(imx477, regs[i].address, 1, regs[i].val);
|
|
+ if (ret) {
|
|
+ dev_err_ratelimited(&client->dev,
|
|
+ "Failed to write reg 0x%4.4x. error = %d\n",
|
|
+ regs[i].address, ret);
|
|
+
|
|
+ return ret;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/* Get bayer order based on flip setting. */
|
|
+static u32 imx477_get_format_code(struct imx477 *imx477, u32 code)
|
|
+{
|
|
+ unsigned int i;
|
|
+
|
|
+ lockdep_assert_held(&imx477->mutex);
|
|
+
|
|
+ for (i = 0; i < ARRAY_SIZE(codes); i++)
|
|
+ if (codes[i] == code)
|
|
+ break;
|
|
+
|
|
+ if (i >= ARRAY_SIZE(codes))
|
|
+ i = 0;
|
|
+
|
|
+ i = (i & ~3) | (imx477->vflip->val ? 2 : 0) |
|
|
+ (imx477->hflip->val ? 1 : 0);
|
|
+
|
|
+ return codes[i];
|
|
+}
|
|
+
|
|
+static void imx477_set_default_format(struct imx477 *imx477)
|
|
+{
|
|
+ /* Set default mode to max resolution */
|
|
+ imx477->mode = &supported_modes_12bit[0];
|
|
+ imx477->fmt_code = MEDIA_BUS_FMT_SRGGB12_1X12;
|
|
+}
|
|
+
|
|
+static int imx477_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
+{
|
|
+ struct imx477 *imx477 = to_imx477(sd);
|
|
+ struct v4l2_mbus_framefmt *try_fmt_img =
|
|
+ v4l2_subdev_get_try_format(sd, fh->pad, IMAGE_PAD);
|
|
+ struct v4l2_mbus_framefmt *try_fmt_meta =
|
|
+ v4l2_subdev_get_try_format(sd, fh->pad, METADATA_PAD);
|
|
+ struct v4l2_rect *try_crop;
|
|
+
|
|
+ mutex_lock(&imx477->mutex);
|
|
+
|
|
+ /* Initialize try_fmt for the image pad */
|
|
+ try_fmt_img->width = supported_modes_12bit[0].width;
|
|
+ try_fmt_img->height = supported_modes_12bit[0].height;
|
|
+ try_fmt_img->code = imx477_get_format_code(imx477,
|
|
+ MEDIA_BUS_FMT_SRGGB12_1X12);
|
|
+ try_fmt_img->field = V4L2_FIELD_NONE;
|
|
+
|
|
+ /* Initialize try_fmt for the embedded metadata pad */
|
|
+ try_fmt_meta->width = IMX477_EMBEDDED_LINE_WIDTH;
|
|
+ try_fmt_meta->height = IMX477_NUM_EMBEDDED_LINES;
|
|
+ try_fmt_meta->code = MEDIA_BUS_FMT_SENSOR_DATA;
|
|
+ try_fmt_meta->field = V4L2_FIELD_NONE;
|
|
+
|
|
+ /* Initialize try_crop */
|
|
+ try_crop = v4l2_subdev_get_try_crop(sd, fh->pad, IMAGE_PAD);
|
|
+ try_crop->left = IMX477_PIXEL_ARRAY_LEFT;
|
|
+ try_crop->top = IMX477_PIXEL_ARRAY_TOP;
|
|
+ try_crop->width = IMX477_PIXEL_ARRAY_WIDTH;
|
|
+ try_crop->height = IMX477_PIXEL_ARRAY_HEIGHT;
|
|
+
|
|
+ mutex_unlock(&imx477->mutex);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void imx477_adjust_exposure_range(struct imx477 *imx477)
|
|
+{
|
|
+ int exposure_max, exposure_def;
|
|
+
|
|
+ /* Honour the VBLANK limits when setting exposure. */
|
|
+ exposure_max = imx477->mode->height + imx477->vblank->val -
|
|
+ IMX477_EXPOSURE_OFFSET;
|
|
+ exposure_def = min(exposure_max, imx477->exposure->val);
|
|
+ __v4l2_ctrl_modify_range(imx477->exposure, imx477->exposure->minimum,
|
|
+ exposure_max, imx477->exposure->step,
|
|
+ exposure_def);
|
|
+}
|
|
+
|
|
+static int imx477_set_frame_length(struct imx477 *imx477, unsigned int val)
|
|
+{
|
|
+ int ret = 0;
|
|
+
|
|
+ imx477->long_exp_shift = 0;
|
|
+
|
|
+ while (val > IMX477_FRAME_LENGTH_MAX) {
|
|
+ imx477->long_exp_shift++;
|
|
+ val >>= 1;
|
|
+ }
|
|
+
|
|
+ ret = imx477_write_reg(imx477, IMX477_REG_FRAME_LENGTH,
|
|
+ IMX477_REG_VALUE_16BIT, val);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ return imx477_write_reg(imx477, IMX477_LONG_EXP_SHIFT_REG,
|
|
+ IMX477_REG_VALUE_08BIT, imx477->long_exp_shift);
|
|
+}
|
|
+
|
|
+static int imx477_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
+{
|
|
+ struct imx477 *imx477 =
|
|
+ container_of(ctrl->handler, struct imx477, ctrl_handler);
|
|
+ struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
|
|
+ int ret = 0;
|
|
+
|
|
+ /*
|
|
+ * The VBLANK control may change the limits of usable exposure, so check
|
|
+ * and adjust if necessary.
|
|
+ */
|
|
+ if (ctrl->id == V4L2_CID_VBLANK)
|
|
+ imx477_adjust_exposure_range(imx477);
|
|
+
|
|
+ /*
|
|
+ * Applying V4L2 control value only happens
|
|
+ * when power is up for streaming
|
|
+ */
|
|
+ if (pm_runtime_get_if_in_use(&client->dev) == 0)
|
|
+ return 0;
|
|
+
|
|
+ switch (ctrl->id) {
|
|
+ case V4L2_CID_ANALOGUE_GAIN:
|
|
+ ret = imx477_write_reg(imx477, IMX477_REG_ANALOG_GAIN,
|
|
+ IMX477_REG_VALUE_16BIT, ctrl->val);
|
|
+ break;
|
|
+ case V4L2_CID_EXPOSURE:
|
|
+ ret = imx477_write_reg(imx477, IMX477_REG_EXPOSURE,
|
|
+ IMX477_REG_VALUE_16BIT, ctrl->val >>
|
|
+ imx477->long_exp_shift);
|
|
+ break;
|
|
+ case V4L2_CID_DIGITAL_GAIN:
|
|
+ ret = imx477_write_reg(imx477, IMX477_REG_DIGITAL_GAIN,
|
|
+ IMX477_REG_VALUE_16BIT, ctrl->val);
|
|
+ break;
|
|
+ case V4L2_CID_TEST_PATTERN:
|
|
+ ret = imx477_write_reg(imx477, IMX477_REG_TEST_PATTERN,
|
|
+ IMX477_REG_VALUE_16BIT,
|
|
+ imx477_test_pattern_val[ctrl->val]);
|
|
+ break;
|
|
+ case V4L2_CID_TEST_PATTERN_RED:
|
|
+ ret = imx477_write_reg(imx477, IMX477_REG_TEST_PATTERN_R,
|
|
+ IMX477_REG_VALUE_16BIT, ctrl->val);
|
|
+ break;
|
|
+ case V4L2_CID_TEST_PATTERN_GREENR:
|
|
+ ret = imx477_write_reg(imx477, IMX477_REG_TEST_PATTERN_GR,
|
|
+ IMX477_REG_VALUE_16BIT, ctrl->val);
|
|
+ break;
|
|
+ case V4L2_CID_TEST_PATTERN_BLUE:
|
|
+ ret = imx477_write_reg(imx477, IMX477_REG_TEST_PATTERN_B,
|
|
+ IMX477_REG_VALUE_16BIT, ctrl->val);
|
|
+ break;
|
|
+ case V4L2_CID_TEST_PATTERN_GREENB:
|
|
+ ret = imx477_write_reg(imx477, IMX477_REG_TEST_PATTERN_GB,
|
|
+ IMX477_REG_VALUE_16BIT, ctrl->val);
|
|
+ break;
|
|
+ case V4L2_CID_HFLIP:
|
|
+ case V4L2_CID_VFLIP:
|
|
+ ret = imx477_write_reg(imx477, IMX477_REG_ORIENTATION, 1,
|
|
+ imx477->hflip->val |
|
|
+ imx477->vflip->val << 1);
|
|
+ break;
|
|
+ case V4L2_CID_VBLANK:
|
|
+ ret = imx477_set_frame_length(imx477,
|
|
+ imx477->mode->height + ctrl->val);
|
|
+ break;
|
|
+ case V4L2_CID_HBLANK:
|
|
+ ret = imx477_write_reg(imx477, IMX477_REG_LINE_LENGTH, 2,
|
|
+ imx477->mode->width + ctrl->val);
|
|
+ break;
|
|
+ default:
|
|
+ dev_info(&client->dev,
|
|
+ "ctrl(id:0x%x,val:0x%x) is not handled\n",
|
|
+ ctrl->id, ctrl->val);
|
|
+ ret = -EINVAL;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ pm_runtime_put(&client->dev);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static const struct v4l2_ctrl_ops imx477_ctrl_ops = {
|
|
+ .s_ctrl = imx477_set_ctrl,
|
|
+};
|
|
+
|
|
+static int imx477_enum_mbus_code(struct v4l2_subdev *sd,
|
|
+ struct v4l2_subdev_pad_config *cfg,
|
|
+ struct v4l2_subdev_mbus_code_enum *code)
|
|
+{
|
|
+ struct imx477 *imx477 = to_imx477(sd);
|
|
+
|
|
+ if (code->pad >= NUM_PADS)
|
|
+ return -EINVAL;
|
|
+
|
|
+ if (code->pad == IMAGE_PAD) {
|
|
+ if (code->index >= (ARRAY_SIZE(codes) / 4))
|
|
+ return -EINVAL;
|
|
+
|
|
+ code->code = imx477_get_format_code(imx477,
|
|
+ codes[code->index * 4]);
|
|
+ } else {
|
|
+ if (code->index > 0)
|
|
+ return -EINVAL;
|
|
+
|
|
+ code->code = MEDIA_BUS_FMT_SENSOR_DATA;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int imx477_enum_frame_size(struct v4l2_subdev *sd,
|
|
+ struct v4l2_subdev_pad_config *cfg,
|
|
+ struct v4l2_subdev_frame_size_enum *fse)
|
|
+{
|
|
+ struct imx477 *imx477 = to_imx477(sd);
|
|
+
|
|
+ if (fse->pad >= NUM_PADS)
|
|
+ return -EINVAL;
|
|
+
|
|
+ if (fse->pad == IMAGE_PAD) {
|
|
+ const struct imx477_mode *mode_list;
|
|
+ unsigned int num_modes;
|
|
+
|
|
+ get_mode_table(fse->code, &mode_list, &num_modes);
|
|
+
|
|
+ if (fse->index >= num_modes)
|
|
+ return -EINVAL;
|
|
+
|
|
+ if (fse->code != imx477_get_format_code(imx477, fse->code))
|
|
+ return -EINVAL;
|
|
+
|
|
+ fse->min_width = mode_list[fse->index].width;
|
|
+ fse->max_width = fse->min_width;
|
|
+ fse->min_height = mode_list[fse->index].height;
|
|
+ fse->max_height = fse->min_height;
|
|
+ } else {
|
|
+ if (fse->code != MEDIA_BUS_FMT_SENSOR_DATA || fse->index > 0)
|
|
+ return -EINVAL;
|
|
+
|
|
+ fse->min_width = IMX477_EMBEDDED_LINE_WIDTH;
|
|
+ fse->max_width = fse->min_width;
|
|
+ fse->min_height = IMX477_NUM_EMBEDDED_LINES;
|
|
+ fse->max_height = fse->min_height;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void imx477_reset_colorspace(struct v4l2_mbus_framefmt *fmt)
|
|
+{
|
|
+ fmt->colorspace = V4L2_COLORSPACE_RAW;
|
|
+ fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
|
|
+ fmt->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
|
|
+ fmt->colorspace,
|
|
+ fmt->ycbcr_enc);
|
|
+ fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
|
|
+}
|
|
+
|
|
+static void imx477_update_image_pad_format(struct imx477 *imx477,
|
|
+ const struct imx477_mode *mode,
|
|
+ struct v4l2_subdev_format *fmt)
|
|
+{
|
|
+ fmt->format.width = mode->width;
|
|
+ fmt->format.height = mode->height;
|
|
+ fmt->format.field = V4L2_FIELD_NONE;
|
|
+ imx477_reset_colorspace(&fmt->format);
|
|
+}
|
|
+
|
|
+static void imx477_update_metadata_pad_format(struct v4l2_subdev_format *fmt)
|
|
+{
|
|
+ fmt->format.width = IMX477_EMBEDDED_LINE_WIDTH;
|
|
+ fmt->format.height = IMX477_NUM_EMBEDDED_LINES;
|
|
+ fmt->format.code = MEDIA_BUS_FMT_SENSOR_DATA;
|
|
+ fmt->format.field = V4L2_FIELD_NONE;
|
|
+}
|
|
+
|
|
+static int imx477_get_pad_format(struct v4l2_subdev *sd,
|
|
+ struct v4l2_subdev_pad_config *cfg,
|
|
+ struct v4l2_subdev_format *fmt)
|
|
+{
|
|
+ struct imx477 *imx477 = to_imx477(sd);
|
|
+
|
|
+ if (fmt->pad >= NUM_PADS)
|
|
+ return -EINVAL;
|
|
+
|
|
+ mutex_lock(&imx477->mutex);
|
|
+
|
|
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
+ struct v4l2_mbus_framefmt *try_fmt =
|
|
+ v4l2_subdev_get_try_format(&imx477->sd, cfg, fmt->pad);
|
|
+ /* update the code which could change due to vflip or hflip: */
|
|
+ try_fmt->code = fmt->pad == IMAGE_PAD ?
|
|
+ imx477_get_format_code(imx477, try_fmt->code) :
|
|
+ MEDIA_BUS_FMT_SENSOR_DATA;
|
|
+ fmt->format = *try_fmt;
|
|
+ } else {
|
|
+ if (fmt->pad == IMAGE_PAD) {
|
|
+ imx477_update_image_pad_format(imx477, imx477->mode,
|
|
+ fmt);
|
|
+ fmt->format.code =
|
|
+ imx477_get_format_code(imx477, imx477->fmt_code);
|
|
+ } else {
|
|
+ imx477_update_metadata_pad_format(fmt);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ mutex_unlock(&imx477->mutex);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static
|
|
+unsigned int imx477_get_frame_length(const struct imx477_mode *mode,
|
|
+ const struct v4l2_fract *timeperframe)
|
|
+{
|
|
+ u64 frame_length;
|
|
+
|
|
+ frame_length = (u64)timeperframe->numerator * IMX477_PIXEL_RATE;
|
|
+ do_div(frame_length,
|
|
+ (u64)timeperframe->denominator * mode->line_length_pix);
|
|
+
|
|
+ if (WARN_ON(frame_length > IMX477_FRAME_LENGTH_MAX))
|
|
+ frame_length = IMX477_FRAME_LENGTH_MAX;
|
|
+
|
|
+ return max_t(unsigned int, frame_length, mode->height);
|
|
+}
|
|
+
|
|
+static void imx477_set_framing_limits(struct imx477 *imx477)
|
|
+{
|
|
+ unsigned int frm_length_min, frm_length_default, hblank_min;
|
|
+ const struct imx477_mode *mode = imx477->mode;
|
|
+
|
|
+ frm_length_min = imx477_get_frame_length(mode, &mode->timeperframe_min);
|
|
+ frm_length_default =
|
|
+ imx477_get_frame_length(mode, &mode->timeperframe_default);
|
|
+
|
|
+ /* Default to no long exposure multiplier. */
|
|
+ imx477->long_exp_shift = 0;
|
|
+
|
|
+ /* Update limits and set FPS to default */
|
|
+ __v4l2_ctrl_modify_range(imx477->vblank, frm_length_min - mode->height,
|
|
+ ((1 << IMX477_LONG_EXP_SHIFT_MAX) *
|
|
+ IMX477_FRAME_LENGTH_MAX) - mode->height,
|
|
+ 1, frm_length_default - mode->height);
|
|
+
|
|
+ /* Setting this will adjust the exposure limits as well. */
|
|
+ __v4l2_ctrl_s_ctrl(imx477->vblank, frm_length_default - mode->height);
|
|
+
|
|
+ hblank_min = mode->line_length_pix - mode->width;
|
|
+ __v4l2_ctrl_modify_range(imx477->hblank, hblank_min,
|
|
+ IMX477_LINE_LENGTH_MAX, 1, hblank_min);
|
|
+ __v4l2_ctrl_s_ctrl(imx477->hblank, hblank_min);
|
|
+}
|
|
+
|
|
+static int imx477_set_pad_format(struct v4l2_subdev *sd,
|
|
+ struct v4l2_subdev_pad_config *cfg,
|
|
+ struct v4l2_subdev_format *fmt)
|
|
+{
|
|
+ struct v4l2_mbus_framefmt *framefmt;
|
|
+ const struct imx477_mode *mode;
|
|
+ struct imx477 *imx477 = to_imx477(sd);
|
|
+
|
|
+ if (fmt->pad >= NUM_PADS)
|
|
+ return -EINVAL;
|
|
+
|
|
+ mutex_lock(&imx477->mutex);
|
|
+
|
|
+ if (fmt->pad == IMAGE_PAD) {
|
|
+ const struct imx477_mode *mode_list;
|
|
+ unsigned int num_modes;
|
|
+
|
|
+ /* Bayer order varies with flips */
|
|
+ fmt->format.code = imx477_get_format_code(imx477,
|
|
+ fmt->format.code);
|
|
+
|
|
+ get_mode_table(fmt->format.code, &mode_list, &num_modes);
|
|
+
|
|
+ mode = v4l2_find_nearest_size(mode_list,
|
|
+ num_modes,
|
|
+ width, height,
|
|
+ fmt->format.width,
|
|
+ fmt->format.height);
|
|
+ imx477_update_image_pad_format(imx477, mode, fmt);
|
|
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
+ framefmt = v4l2_subdev_get_try_format(sd, cfg,
|
|
+ fmt->pad);
|
|
+ *framefmt = fmt->format;
|
|
+ } else if (imx477->mode != mode) {
|
|
+ imx477->mode = mode;
|
|
+ imx477->fmt_code = fmt->format.code;
|
|
+ imx477_set_framing_limits(imx477);
|
|
+ }
|
|
+ } else {
|
|
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
+ framefmt = v4l2_subdev_get_try_format(sd, cfg,
|
|
+ fmt->pad);
|
|
+ *framefmt = fmt->format;
|
|
+ } else {
|
|
+ /* Only one embedded data mode is supported */
|
|
+ imx477_update_metadata_pad_format(fmt);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ mutex_unlock(&imx477->mutex);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static const struct v4l2_rect *
|
|
+__imx477_get_pad_crop(struct imx477 *imx477, struct v4l2_subdev_pad_config *cfg,
|
|
+ unsigned int pad, enum v4l2_subdev_format_whence which)
|
|
+{
|
|
+ switch (which) {
|
|
+ case V4L2_SUBDEV_FORMAT_TRY:
|
|
+ return v4l2_subdev_get_try_crop(&imx477->sd, cfg, pad);
|
|
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
|
|
+ return &imx477->mode->crop;
|
|
+ }
|
|
+
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+static int imx477_get_selection(struct v4l2_subdev *sd,
|
|
+ struct v4l2_subdev_pad_config *cfg,
|
|
+ struct v4l2_subdev_selection *sel)
|
|
+{
|
|
+ switch (sel->target) {
|
|
+ case V4L2_SEL_TGT_CROP: {
|
|
+ struct imx477 *imx477 = to_imx477(sd);
|
|
+
|
|
+ mutex_lock(&imx477->mutex);
|
|
+ sel->r = *__imx477_get_pad_crop(imx477, cfg, sel->pad,
|
|
+ sel->which);
|
|
+ mutex_unlock(&imx477->mutex);
|
|
+
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ case V4L2_SEL_TGT_NATIVE_SIZE:
|
|
+ sel->r.left = 0;
|
|
+ sel->r.top = 0;
|
|
+ sel->r.width = IMX477_NATIVE_WIDTH;
|
|
+ sel->r.height = IMX477_NATIVE_HEIGHT;
|
|
+
|
|
+ return 0;
|
|
+
|
|
+ case V4L2_SEL_TGT_CROP_DEFAULT:
|
|
+ case V4L2_SEL_TGT_CROP_BOUNDS:
|
|
+ sel->r.left = IMX477_PIXEL_ARRAY_LEFT;
|
|
+ sel->r.top = IMX477_PIXEL_ARRAY_TOP;
|
|
+ sel->r.width = IMX477_PIXEL_ARRAY_WIDTH;
|
|
+ sel->r.height = IMX477_PIXEL_ARRAY_HEIGHT;
|
|
+
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ return -EINVAL;
|
|
+}
|
|
+
|
|
+/* Start streaming */
|
|
+static int imx477_start_streaming(struct imx477 *imx477)
|
|
+{
|
|
+ struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
|
|
+ const struct imx477_reg_list *reg_list;
|
|
+ const struct imx477_reg_list *extra_regs;
|
|
+ int ret;
|
|
+
|
|
+ if (!imx477->common_regs_written) {
|
|
+ ret = imx477_write_regs(imx477, mode_common_regs,
|
|
+ ARRAY_SIZE(mode_common_regs));
|
|
+ if (!ret) {
|
|
+ extra_regs = &imx477->compatible_data->extra_regs;
|
|
+ ret = imx477_write_regs(imx477, extra_regs->regs,
|
|
+ extra_regs->num_of_regs);
|
|
+ }
|
|
+
|
|
+ if (ret) {
|
|
+ dev_err(&client->dev, "%s failed to set common settings\n",
|
|
+ __func__);
|
|
+ return ret;
|
|
+ }
|
|
+ imx477->common_regs_written = true;
|
|
+ }
|
|
+
|
|
+ /* Apply default values of current mode */
|
|
+ reg_list = &imx477->mode->reg_list;
|
|
+ ret = imx477_write_regs(imx477, reg_list->regs, reg_list->num_of_regs);
|
|
+ if (ret) {
|
|
+ dev_err(&client->dev, "%s failed to set mode\n", __func__);
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ /* Set on-sensor DPC. */
|
|
+ imx477_write_reg(imx477, 0x0b05, IMX477_REG_VALUE_08BIT, !!dpc_enable);
|
|
+ imx477_write_reg(imx477, 0x0b06, IMX477_REG_VALUE_08BIT, !!dpc_enable);
|
|
+
|
|
+ /* Set vsync trigger mode */
|
|
+ if (trigger_mode != 0) {
|
|
+ /* trigger_mode == 1 for source, 2 for sink */
|
|
+ const u32 val = (trigger_mode == 1) ? 1 : 0;
|
|
+
|
|
+ imx477_write_reg(imx477, IMX477_REG_MC_MODE,
|
|
+ IMX477_REG_VALUE_08BIT, 1);
|
|
+ imx477_write_reg(imx477, IMX477_REG_MS_SEL,
|
|
+ IMX477_REG_VALUE_08BIT, val);
|
|
+ imx477_write_reg(imx477, IMX477_REG_XVS_IO_CTRL,
|
|
+ IMX477_REG_VALUE_08BIT, val);
|
|
+ imx477_write_reg(imx477, IMX477_REG_EXTOUT_EN,
|
|
+ IMX477_REG_VALUE_08BIT, val);
|
|
+ }
|
|
+
|
|
+ /* Apply customized values from user */
|
|
+ ret = __v4l2_ctrl_handler_setup(imx477->sd.ctrl_handler);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ /* set stream on register */
|
|
+ return imx477_write_reg(imx477, IMX477_REG_MODE_SELECT,
|
|
+ IMX477_REG_VALUE_08BIT, IMX477_MODE_STREAMING);
|
|
+}
|
|
+
|
|
+/* Stop streaming */
|
|
+static void imx477_stop_streaming(struct imx477 *imx477)
|
|
+{
|
|
+ struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
|
|
+ int ret;
|
|
+
|
|
+ /* set stream off register */
|
|
+ ret = imx477_write_reg(imx477, IMX477_REG_MODE_SELECT,
|
|
+ IMX477_REG_VALUE_08BIT, IMX477_MODE_STANDBY);
|
|
+ if (ret)
|
|
+ dev_err(&client->dev, "%s failed to set stream\n", __func__);
|
|
+}
|
|
+
|
|
+static int imx477_set_stream(struct v4l2_subdev *sd, int enable)
|
|
+{
|
|
+ struct imx477 *imx477 = to_imx477(sd);
|
|
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
+ int ret = 0;
|
|
+
|
|
+ mutex_lock(&imx477->mutex);
|
|
+ if (imx477->streaming == enable) {
|
|
+ mutex_unlock(&imx477->mutex);
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ if (enable) {
|
|
+ ret = pm_runtime_get_sync(&client->dev);
|
|
+ if (ret < 0) {
|
|
+ pm_runtime_put_noidle(&client->dev);
|
|
+ goto err_unlock;
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Apply default & customized values
|
|
+ * and then start streaming.
|
|
+ */
|
|
+ ret = imx477_start_streaming(imx477);
|
|
+ if (ret)
|
|
+ goto err_rpm_put;
|
|
+ } else {
|
|
+ imx477_stop_streaming(imx477);
|
|
+ pm_runtime_put(&client->dev);
|
|
+ }
|
|
+
|
|
+ imx477->streaming = enable;
|
|
+
|
|
+ /* vflip and hflip cannot change during streaming */
|
|
+ __v4l2_ctrl_grab(imx477->vflip, enable);
|
|
+ __v4l2_ctrl_grab(imx477->hflip, enable);
|
|
+
|
|
+ mutex_unlock(&imx477->mutex);
|
|
+
|
|
+ return ret;
|
|
+
|
|
+err_rpm_put:
|
|
+ pm_runtime_put(&client->dev);
|
|
+err_unlock:
|
|
+ mutex_unlock(&imx477->mutex);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+/* Power/clock management functions */
|
|
+static int imx477_power_on(struct device *dev)
|
|
+{
|
|
+ struct i2c_client *client = to_i2c_client(dev);
|
|
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
+ struct imx477 *imx477 = to_imx477(sd);
|
|
+ int ret;
|
|
+
|
|
+ ret = regulator_bulk_enable(IMX477_NUM_SUPPLIES,
|
|
+ imx477->supplies);
|
|
+ if (ret) {
|
|
+ dev_err(&client->dev, "%s: failed to enable regulators\n",
|
|
+ __func__);
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ ret = clk_prepare_enable(imx477->xclk);
|
|
+ if (ret) {
|
|
+ dev_err(&client->dev, "%s: failed to enable clock\n",
|
|
+ __func__);
|
|
+ goto reg_off;
|
|
+ }
|
|
+
|
|
+ gpiod_set_value_cansleep(imx477->reset_gpio, 1);
|
|
+ usleep_range(IMX477_XCLR_MIN_DELAY_US,
|
|
+ IMX477_XCLR_MIN_DELAY_US + IMX477_XCLR_DELAY_RANGE_US);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+reg_off:
|
|
+ regulator_bulk_disable(IMX477_NUM_SUPPLIES, imx477->supplies);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int imx477_power_off(struct device *dev)
|
|
+{
|
|
+ struct i2c_client *client = to_i2c_client(dev);
|
|
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
+ struct imx477 *imx477 = to_imx477(sd);
|
|
+
|
|
+ gpiod_set_value_cansleep(imx477->reset_gpio, 0);
|
|
+ regulator_bulk_disable(IMX477_NUM_SUPPLIES, imx477->supplies);
|
|
+ clk_disable_unprepare(imx477->xclk);
|
|
+
|
|
+ /* Force reprogramming of the common registers when powered up again. */
|
|
+ imx477->common_regs_written = false;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int __maybe_unused imx477_suspend(struct device *dev)
|
|
+{
|
|
+ struct i2c_client *client = to_i2c_client(dev);
|
|
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
+ struct imx477 *imx477 = to_imx477(sd);
|
|
+
|
|
+ if (imx477->streaming)
|
|
+ imx477_stop_streaming(imx477);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int __maybe_unused imx477_resume(struct device *dev)
|
|
+{
|
|
+ struct i2c_client *client = to_i2c_client(dev);
|
|
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
+ struct imx477 *imx477 = to_imx477(sd);
|
|
+ int ret;
|
|
+
|
|
+ if (imx477->streaming) {
|
|
+ ret = imx477_start_streaming(imx477);
|
|
+ if (ret)
|
|
+ goto error;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+
|
|
+error:
|
|
+ imx477_stop_streaming(imx477);
|
|
+ imx477->streaming = 0;
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int imx477_get_regulators(struct imx477 *imx477)
|
|
+{
|
|
+ struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
|
|
+ unsigned int i;
|
|
+
|
|
+ for (i = 0; i < IMX477_NUM_SUPPLIES; i++)
|
|
+ imx477->supplies[i].supply = imx477_supply_name[i];
|
|
+
|
|
+ return devm_regulator_bulk_get(&client->dev,
|
|
+ IMX477_NUM_SUPPLIES,
|
|
+ imx477->supplies);
|
|
+}
|
|
+
|
|
+/* Verify chip ID */
|
|
+static int imx477_identify_module(struct imx477 *imx477, u32 expected_id)
|
|
+{
|
|
+ struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
|
|
+ int ret;
|
|
+ u32 val;
|
|
+
|
|
+ ret = imx477_read_reg(imx477, IMX477_REG_CHIP_ID,
|
|
+ IMX477_REG_VALUE_16BIT, &val);
|
|
+ if (ret) {
|
|
+ dev_err(&client->dev, "failed to read chip id %x, with error %d\n",
|
|
+ expected_id, ret);
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ if (val != expected_id) {
|
|
+ dev_err(&client->dev, "chip id mismatch: %x!=%x\n",
|
|
+ expected_id, val);
|
|
+ return -EIO;
|
|
+ }
|
|
+
|
|
+ dev_info(&client->dev, "Device found is imx%x\n", val);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static const struct v4l2_subdev_core_ops imx477_core_ops = {
|
|
+ .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
|
|
+ .unsubscribe_event = v4l2_event_subdev_unsubscribe,
|
|
+};
|
|
+
|
|
+static const struct v4l2_subdev_video_ops imx477_video_ops = {
|
|
+ .s_stream = imx477_set_stream,
|
|
+};
|
|
+
|
|
+static const struct v4l2_subdev_pad_ops imx477_pad_ops = {
|
|
+ .enum_mbus_code = imx477_enum_mbus_code,
|
|
+ .get_fmt = imx477_get_pad_format,
|
|
+ .set_fmt = imx477_set_pad_format,
|
|
+ .get_selection = imx477_get_selection,
|
|
+ .enum_frame_size = imx477_enum_frame_size,
|
|
+};
|
|
+
|
|
+static const struct v4l2_subdev_ops imx477_subdev_ops = {
|
|
+ .core = &imx477_core_ops,
|
|
+ .video = &imx477_video_ops,
|
|
+ .pad = &imx477_pad_ops,
|
|
+};
|
|
+
|
|
+static const struct v4l2_subdev_internal_ops imx477_internal_ops = {
|
|
+ .open = imx477_open,
|
|
+};
|
|
+
|
|
+/* Initialize control handlers */
|
|
+static int imx477_init_controls(struct imx477 *imx477)
|
|
+{
|
|
+ struct v4l2_ctrl_handler *ctrl_hdlr;
|
|
+ struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
|
|
+ struct v4l2_fwnode_device_properties props;
|
|
+ unsigned int i;
|
|
+ int ret;
|
|
+
|
|
+ ctrl_hdlr = &imx477->ctrl_handler;
|
|
+ ret = v4l2_ctrl_handler_init(ctrl_hdlr, 16);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ mutex_init(&imx477->mutex);
|
|
+ ctrl_hdlr->lock = &imx477->mutex;
|
|
+
|
|
+ /* By default, PIXEL_RATE is read only */
|
|
+ imx477->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
|
|
+ V4L2_CID_PIXEL_RATE,
|
|
+ IMX477_PIXEL_RATE,
|
|
+ IMX477_PIXEL_RATE, 1,
|
|
+ IMX477_PIXEL_RATE);
|
|
+
|
|
+ /*
|
|
+ * Create the controls here, but mode specific limits are setup
|
|
+ * in the imx477_set_framing_limits() call below.
|
|
+ */
|
|
+ imx477->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
|
|
+ V4L2_CID_VBLANK, 0, 0xffff, 1, 0);
|
|
+ imx477->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
|
|
+ V4L2_CID_HBLANK, 0, 0xffff, 1, 0);
|
|
+
|
|
+ imx477->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
|
|
+ V4L2_CID_EXPOSURE,
|
|
+ IMX477_EXPOSURE_MIN,
|
|
+ IMX477_EXPOSURE_MAX,
|
|
+ IMX477_EXPOSURE_STEP,
|
|
+ IMX477_EXPOSURE_DEFAULT);
|
|
+
|
|
+ v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
|
|
+ IMX477_ANA_GAIN_MIN, IMX477_ANA_GAIN_MAX,
|
|
+ IMX477_ANA_GAIN_STEP, IMX477_ANA_GAIN_DEFAULT);
|
|
+
|
|
+ v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
|
|
+ IMX477_DGTL_GAIN_MIN, IMX477_DGTL_GAIN_MAX,
|
|
+ IMX477_DGTL_GAIN_STEP, IMX477_DGTL_GAIN_DEFAULT);
|
|
+
|
|
+ imx477->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
|
|
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
|
|
+ if (imx477->hflip)
|
|
+ imx477->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
|
|
+
|
|
+ imx477->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
|
|
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
|
|
+ if (imx477->vflip)
|
|
+ imx477->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
|
|
+
|
|
+ v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx477_ctrl_ops,
|
|
+ V4L2_CID_TEST_PATTERN,
|
|
+ ARRAY_SIZE(imx477_test_pattern_menu) - 1,
|
|
+ 0, 0, imx477_test_pattern_menu);
|
|
+ for (i = 0; i < 4; i++) {
|
|
+ /*
|
|
+ * The assumption is that
|
|
+ * V4L2_CID_TEST_PATTERN_GREENR == V4L2_CID_TEST_PATTERN_RED + 1
|
|
+ * V4L2_CID_TEST_PATTERN_BLUE == V4L2_CID_TEST_PATTERN_RED + 2
|
|
+ * V4L2_CID_TEST_PATTERN_GREENB == V4L2_CID_TEST_PATTERN_RED + 3
|
|
+ */
|
|
+ v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
|
|
+ V4L2_CID_TEST_PATTERN_RED + i,
|
|
+ IMX477_TEST_PATTERN_COLOUR_MIN,
|
|
+ IMX477_TEST_PATTERN_COLOUR_MAX,
|
|
+ IMX477_TEST_PATTERN_COLOUR_STEP,
|
|
+ IMX477_TEST_PATTERN_COLOUR_MAX);
|
|
+ /* The "Solid color" pattern is white by default */
|
|
+ }
|
|
+
|
|
+ if (ctrl_hdlr->error) {
|
|
+ ret = ctrl_hdlr->error;
|
|
+ dev_err(&client->dev, "%s control init failed (%d)\n",
|
|
+ __func__, ret);
|
|
+ goto error;
|
|
+ }
|
|
+
|
|
+ ret = v4l2_fwnode_device_parse(&client->dev, &props);
|
|
+ if (ret)
|
|
+ goto error;
|
|
+
|
|
+ ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx477_ctrl_ops,
|
|
+ &props);
|
|
+ if (ret)
|
|
+ goto error;
|
|
+
|
|
+ imx477->sd.ctrl_handler = ctrl_hdlr;
|
|
+
|
|
+ /* Setup exposure and frame/line length limits. */
|
|
+ imx477_set_framing_limits(imx477);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+error:
|
|
+ v4l2_ctrl_handler_free(ctrl_hdlr);
|
|
+ mutex_destroy(&imx477->mutex);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static void imx477_free_controls(struct imx477 *imx477)
|
|
+{
|
|
+ v4l2_ctrl_handler_free(imx477->sd.ctrl_handler);
|
|
+ mutex_destroy(&imx477->mutex);
|
|
+}
|
|
+
|
|
+static int imx477_check_hwcfg(struct device *dev)
|
|
+{
|
|
+ struct fwnode_handle *endpoint;
|
|
+ struct v4l2_fwnode_endpoint ep_cfg = {
|
|
+ .bus_type = V4L2_MBUS_CSI2_DPHY
|
|
+ };
|
|
+ int ret = -EINVAL;
|
|
+
|
|
+ endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
|
|
+ if (!endpoint) {
|
|
+ dev_err(dev, "endpoint node not found\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ if (v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep_cfg)) {
|
|
+ dev_err(dev, "could not parse endpoint\n");
|
|
+ goto error_out;
|
|
+ }
|
|
+
|
|
+ /* Check the number of MIPI CSI2 data lanes */
|
|
+ if (ep_cfg.bus.mipi_csi2.num_data_lanes != 2) {
|
|
+ dev_err(dev, "only 2 data lanes are currently supported\n");
|
|
+ goto error_out;
|
|
+ }
|
|
+
|
|
+ /* Check the link frequency set in device tree */
|
|
+ if (!ep_cfg.nr_of_link_frequencies) {
|
|
+ dev_err(dev, "link-frequency property not found in DT\n");
|
|
+ goto error_out;
|
|
+ }
|
|
+
|
|
+ if (ep_cfg.nr_of_link_frequencies != 1 ||
|
|
+ ep_cfg.link_frequencies[0] != IMX477_DEFAULT_LINK_FREQ) {
|
|
+ dev_err(dev, "Link frequency not supported: %lld\n",
|
|
+ ep_cfg.link_frequencies[0]);
|
|
+ goto error_out;
|
|
+ }
|
|
+
|
|
+ ret = 0;
|
|
+
|
|
+error_out:
|
|
+ v4l2_fwnode_endpoint_free(&ep_cfg);
|
|
+ fwnode_handle_put(endpoint);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static const struct imx477_compatible_data imx477_compatible = {
|
|
+ .chip_id = IMX477_CHIP_ID,
|
|
+ .extra_regs = {
|
|
+ .num_of_regs = 0,
|
|
+ .regs = NULL
|
|
+ }
|
|
+};
|
|
+
|
|
+static const struct imx477_reg imx378_regs[] = {
|
|
+ {0x3e35, 0x01},
|
|
+ {0x4421, 0x08},
|
|
+ {0x3ff9, 0x00},
|
|
+};
|
|
+
|
|
+static const struct imx477_compatible_data imx378_compatible = {
|
|
+ .chip_id = IMX378_CHIP_ID,
|
|
+ .extra_regs = {
|
|
+ .num_of_regs = ARRAY_SIZE(imx378_regs),
|
|
+ .regs = imx378_regs
|
|
+ }
|
|
+};
|
|
+
|
|
+static const struct of_device_id imx477_dt_ids[] = {
|
|
+ { .compatible = "sony,imx477", .data = &imx477_compatible },
|
|
+ { .compatible = "sony,imx378", .data = &imx378_compatible },
|
|
+ { /* sentinel */ }
|
|
+};
|
|
+
|
|
+static int imx477_probe(struct i2c_client *client)
|
|
+{
|
|
+ struct device *dev = &client->dev;
|
|
+ struct imx477 *imx477;
|
|
+ const struct of_device_id *match;
|
|
+ int ret;
|
|
+
|
|
+ imx477 = devm_kzalloc(&client->dev, sizeof(*imx477), GFP_KERNEL);
|
|
+ if (!imx477)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ v4l2_i2c_subdev_init(&imx477->sd, client, &imx477_subdev_ops);
|
|
+
|
|
+ match = of_match_device(imx477_dt_ids, dev);
|
|
+ if (!match)
|
|
+ return -ENODEV;
|
|
+ imx477->compatible_data =
|
|
+ (const struct imx477_compatible_data *)match->data;
|
|
+
|
|
+ /* Check the hardware configuration in device tree */
|
|
+ if (imx477_check_hwcfg(dev))
|
|
+ return -EINVAL;
|
|
+
|
|
+ /* Get system clock (xclk) */
|
|
+ imx477->xclk = devm_clk_get(dev, NULL);
|
|
+ if (IS_ERR(imx477->xclk)) {
|
|
+ dev_err(dev, "failed to get xclk\n");
|
|
+ return PTR_ERR(imx477->xclk);
|
|
+ }
|
|
+
|
|
+ imx477->xclk_freq = clk_get_rate(imx477->xclk);
|
|
+ if (imx477->xclk_freq != IMX477_XCLK_FREQ) {
|
|
+ dev_err(dev, "xclk frequency not supported: %d Hz\n",
|
|
+ imx477->xclk_freq);
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ ret = imx477_get_regulators(imx477);
|
|
+ if (ret) {
|
|
+ dev_err(dev, "failed to get regulators\n");
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ /* Request optional enable pin */
|
|
+ imx477->reset_gpio = devm_gpiod_get_optional(dev, "reset",
|
|
+ GPIOD_OUT_HIGH);
|
|
+
|
|
+ /*
|
|
+ * The sensor must be powered for imx477_identify_module()
|
|
+ * to be able to read the CHIP_ID register
|
|
+ */
|
|
+ ret = imx477_power_on(dev);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ ret = imx477_identify_module(imx477, imx477->compatible_data->chip_id);
|
|
+ if (ret)
|
|
+ goto error_power_off;
|
|
+
|
|
+ /* Initialize default format */
|
|
+ imx477_set_default_format(imx477);
|
|
+
|
|
+ /* Enable runtime PM and turn off the device */
|
|
+ pm_runtime_set_active(dev);
|
|
+ pm_runtime_enable(dev);
|
|
+ pm_runtime_idle(dev);
|
|
+
|
|
+ /* This needs the pm runtime to be registered. */
|
|
+ ret = imx477_init_controls(imx477);
|
|
+ if (ret)
|
|
+ goto error_power_off;
|
|
+
|
|
+ /* Initialize subdev */
|
|
+ imx477->sd.internal_ops = &imx477_internal_ops;
|
|
+ imx477->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
|
|
+ V4L2_SUBDEV_FL_HAS_EVENTS;
|
|
+ imx477->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
+
|
|
+ /* Initialize source pads */
|
|
+ imx477->pad[IMAGE_PAD].flags = MEDIA_PAD_FL_SOURCE;
|
|
+ imx477->pad[METADATA_PAD].flags = MEDIA_PAD_FL_SOURCE;
|
|
+
|
|
+ ret = media_entity_pads_init(&imx477->sd.entity, NUM_PADS, imx477->pad);
|
|
+ if (ret) {
|
|
+ dev_err(dev, "failed to init entity pads: %d\n", ret);
|
|
+ goto error_handler_free;
|
|
+ }
|
|
+
|
|
+ ret = v4l2_async_register_subdev_sensor(&imx477->sd);
|
|
+ if (ret < 0) {
|
|
+ dev_err(dev, "failed to register sensor sub-device: %d\n", ret);
|
|
+ goto error_media_entity;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+
|
|
+error_media_entity:
|
|
+ media_entity_cleanup(&imx477->sd.entity);
|
|
+
|
|
+error_handler_free:
|
|
+ imx477_free_controls(imx477);
|
|
+
|
|
+error_power_off:
|
|
+ pm_runtime_disable(&client->dev);
|
|
+ pm_runtime_set_suspended(&client->dev);
|
|
+ imx477_power_off(&client->dev);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static void imx477_remove(struct i2c_client *client)
|
|
+{
|
|
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
+ struct imx477 *imx477 = to_imx477(sd);
|
|
+
|
|
+ v4l2_async_unregister_subdev(sd);
|
|
+ media_entity_cleanup(&sd->entity);
|
|
+ imx477_free_controls(imx477);
|
|
+
|
|
+ pm_runtime_disable(&client->dev);
|
|
+ if (!pm_runtime_status_suspended(&client->dev))
|
|
+ imx477_power_off(&client->dev);
|
|
+ pm_runtime_set_suspended(&client->dev);
|
|
+}
|
|
+
|
|
+MODULE_DEVICE_TABLE(of, imx477_dt_ids);
|
|
+
|
|
+static const struct dev_pm_ops imx477_pm_ops = {
|
|
+ SET_SYSTEM_SLEEP_PM_OPS(imx477_suspend, imx477_resume)
|
|
+ SET_RUNTIME_PM_OPS(imx477_power_off, imx477_power_on, NULL)
|
|
+};
|
|
+
|
|
+static struct i2c_driver imx477_i2c_driver = {
|
|
+ .driver = {
|
|
+ .name = "imx477",
|
|
+ .of_match_table = imx477_dt_ids,
|
|
+ .pm = &imx477_pm_ops,
|
|
+ },
|
|
+ .probe_new = imx477_probe,
|
|
+ .remove = imx477_remove,
|
|
+};
|
|
+
|
|
+module_i2c_driver(imx477_i2c_driver);
|
|
+
|
|
+MODULE_AUTHOR("Naushir Patuck <naush@raspberrypi.com>");
|
|
+MODULE_DESCRIPTION("Sony IMX477 sensor driver");
|
|
+MODULE_LICENSE("GPL v2");
|