mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 08:51:13 +00:00
6ee3680614
Ubiquiti EdgeRouter 6P is 6 port router with similar
specifications as the EdgeRouter 4, support for which was added
in commit dd651e54cc
There are five 10/100/1000 Mbps RJ/Copper ports and
one 1000 Mbps SFP port.
SoC: Octeon Cavium 7130 (Cavium 3) at 1000MHz
Memory: 1GiB DDR3
Flash: 2x2M chips with uboots (chainloaded) + 512K eeprom
LEDs: 1x for power status (white/blue, controllable)
and 6x for ethernet and SFP ports (no control over them)
Buttons: 1x Reset
Serial: 1x RJ45 port on front panel. 115200 baud, 8N1
USB: 1x USB3.0 on front panel
MII: 1x QSGMII from SoC
PHY: 1x Vitesse VSC8504 of which 4 ports are used (phys 4-7)
1x Vitesse VSC8514 of which 2 ports are used (phys 8-9)
Network port mapping
- eth0 on device maps to lan0 and phy5
- eth1 on device maps to lan1 and phy6
- eth2 on device maps to lan2 and phy7
- eth3 on device maps to lan3 and phy8
- eth4 on device maps to lan4 and phy9
- eth5 (SFP) on device maps to lan5 and phy4
What is not working:
- There is no port status available before it goes up
- SFP have no additional status and presented as no different from eth
- Power-over-ethernet (passive) support has not been tested
How to flash the firmware:
- copy openwrt-octeon-ubnt_edgerouter-6p-initramfs-kernel.bin and
openwrt-octeon-ubnt_edgerouter-6p-squashfs-sysupgrade.tar to
USB flash drive that is formatted to vfat/fat32
- connect USB flash drive to EdgeRouter 6P front USB port
- connect serial cable using front RJ45 port (115200 baud, 8N1)
- connect power to cable to EdgeRouter 6P
- connect terminal to the console to see uboot boot process
- interrupt boot by pressing button(s) on your keyboard to log
in to the uboot
- detect usb connected flash drives by typing to the console:
usb start
- after drive is detected load initramfs+kernel to the memory by typing:
fatload usb 0:1 0x20000000 openwrt-octeon-ubnt_edgerouter-6p-initramfs-kernel.bin
- after initramfs+kernel is loaded to the memory load it by typing:
bootoctlinux 0 numcores=4 endbootargs mem=0
- boot process should finish and you will be greeted with console
after pressing enter
- create directory to mount usb flash drive to by typing:
mkdir /tmp/sda
- mount flash drive to that directory by typing:
mount /dev/sda1 /tmp/sda
- flash firmware to router internal storage by typing:
sysupgrade /tmp/sda/openwrt-octeon-ubnt_edgerouter-6p-squashfs-sysupgrade.tar
- device will reboot and after it gets up you will have
edgerouter 6p running openwrt
Signed-off-by: Dan Brown <danbrown@gmail.com>
[reorder/squash patches, move ethernet@0 to DTS, share image setup]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
86 lines
2.7 KiB
Makefile
86 lines
2.7 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# Copyright (C) 2009-2010 OpenWrt.org
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
define Build/append-dtb-to-elf
|
|
$(TARGET_CROSS)objcopy --update-section .appended_dtb=$(KDIR)/image-$(DEVICE_DTS).dtb $@
|
|
endef
|
|
|
|
define Build/strip-kernel
|
|
# Workaround pre-SDK-1.9.0 u-boot versions not handling the .notes section
|
|
$(TARGET_CROSS)strip -R .notes $@ -o $@.stripped && mv $@.stripped $@
|
|
endef
|
|
|
|
DTS_DIR := $(DTS_DIR)/cavium-octeon
|
|
|
|
define Device/Default
|
|
PROFILES = Default $$(DEVICE_NAME)
|
|
KERNEL_NAME := vmlinux.elf
|
|
KERNEL_INITRAMFS_NAME := vmlinux-initramfs.elf
|
|
KERNEL := kernel-bin | strip-kernel | patch-cmdline
|
|
IMAGES := sysupgrade.tar
|
|
IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-extra 128k | sysupgrade-tar rootfs=$$$$@
|
|
IMAGE/sysupgrade.tar := sysupgrade-tar
|
|
endef
|
|
|
|
define Device/generic
|
|
DEVICE_VENDOR := Generic
|
|
DEVICE_MODEL := Octeon
|
|
FILESYSTEMS := ext4
|
|
endef
|
|
TARGET_DEVICES += generic
|
|
|
|
ITUSROUTER_CMDLINE:=console=ttyS0,115200 root=/dev/mmcblk1p2 rootfstype=squashfs,ext4,f2fs rootwait
|
|
define Device/itus_shield-router
|
|
DEVICE_VENDOR := Itus Networks
|
|
DEVICE_MODEL := Shield Router
|
|
CMDLINE := $(ITUSROUTER_CMDLINE)
|
|
IMAGE/sysupgrade.tar/squashfs += | append-metadata
|
|
endef
|
|
TARGET_DEVICES += itus_shield-router
|
|
|
|
ER_CMDLINE:=-mtdparts=phys_mapped_flash:640k(boot0)ro,640k(boot1)ro,64k(eeprom)ro root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
|
|
define Device/ubnt_edgerouter
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_MODEL := EdgeRouter
|
|
BOARD_NAME := er
|
|
CMDLINE := $(ER_CMDLINE)
|
|
endef
|
|
TARGET_DEVICES += ubnt_edgerouter
|
|
|
|
define Device/ubnt_edgerouter-e300
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_PACKAGES += kmod-gpio-button-hotplug kmod-leds-gpio kmod-of-mdio kmod-sfp kmod-usb3 kmod-usb-dwc3 kmod-usb-storage-uas
|
|
KERNEL := kernel-bin | patch-cmdline | append-dtb-to-elf
|
|
KERNEL_DEPENDS := $$(wildcard $(DTS_DIR)/$(DEVICE_DTS).dts)
|
|
CMDLINE := root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
|
|
endef
|
|
|
|
define Device/ubnt_edgerouter-4
|
|
$(Device/ubnt_edgerouter-e300)
|
|
DEVICE_MODEL := EdgeRouter 4
|
|
DEVICE_DTS := cn7130_ubnt_edgerouter-4
|
|
endef
|
|
TARGET_DEVICES += ubnt_edgerouter-4
|
|
|
|
define Device/ubnt_edgerouter-6p
|
|
$(Device/ubnt_edgerouter-e300)
|
|
DEVICE_MODEL := EdgeRouter 6P
|
|
DEVICE_DTS := cn7130_ubnt_edgerouter-6p
|
|
endef
|
|
TARGET_DEVICES += ubnt_edgerouter-6p
|
|
|
|
ERLITE_CMDLINE:=-mtdparts=phys_mapped_flash:512k(boot0)ro,512k(boot1)ro,64k(eeprom)ro root=/dev/sda2 rootfstype=squashfs,ext4 rootwait
|
|
define Device/ubnt_edgerouter-lite
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_MODEL := EdgeRouter Lite
|
|
BOARD_NAME := erlite
|
|
CMDLINE := $(ERLITE_CMDLINE)
|
|
endef
|
|
TARGET_DEVICES += ubnt_edgerouter-lite
|
|
|
|
$(eval $(call BuildImage))
|