mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 10:39:04 +00:00
64afcbad3d
It will be used on NanoPi R2C and OrangePi R1 Plus LTS board. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
303 lines
8.6 KiB
Diff
303 lines
8.6 KiB
Diff
From 4ac94f728a588e7096dd5010cd7141a309ea7805 Mon Sep 17 00:00:00 2001
|
|
From: Frank Sae <Frank.Sae@motor-comm.com>
|
|
Date: Thu, 2 Feb 2023 11:00:37 +0800
|
|
Subject: [PATCH] net: phy: Add driver for Motorcomm yt8531 gigabit ethernet
|
|
phy
|
|
|
|
Add a driver for the motorcomm yt8531 gigabit ethernet phy. We have
|
|
verified the driver on AM335x platform with yt8531 board. On the
|
|
board, yt8531 gigabit ethernet phy works in utp mode, RGMII
|
|
interface, supports 1000M/100M/10M speeds, and wol(magic package).
|
|
|
|
Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
|
|
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
drivers/net/phy/Kconfig | 2 +-
|
|
drivers/net/phy/motorcomm.c | 208 +++++++++++++++++++++++++++++++++++-
|
|
2 files changed, 207 insertions(+), 3 deletions(-)
|
|
|
|
--- a/drivers/net/phy/Kconfig
|
|
+++ b/drivers/net/phy/Kconfig
|
|
@@ -245,7 +245,7 @@ config MOTORCOMM_PHY
|
|
tristate "Motorcomm PHYs"
|
|
help
|
|
Enables support for Motorcomm network PHYs.
|
|
- Currently supports the YT8511, YT8521, YT8531S Gigabit Ethernet PHYs.
|
|
+ Currently supports YT85xx Gigabit Ethernet PHYs.
|
|
|
|
config NATIONAL_PHY
|
|
tristate "National Semiconductor PHYs"
|
|
--- a/drivers/net/phy/motorcomm.c
|
|
+++ b/drivers/net/phy/motorcomm.c
|
|
@@ -1,6 +1,6 @@
|
|
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
- * Motorcomm 8511/8521/8531S PHY driver.
|
|
+ * Motorcomm 8511/8521/8531/8531S PHY driver.
|
|
*
|
|
* Author: Peter Geis <pgwipeout@gmail.com>
|
|
* Author: Frank <Frank.Sae@motor-comm.com>
|
|
@@ -14,6 +14,7 @@
|
|
|
|
#define PHY_ID_YT8511 0x0000010a
|
|
#define PHY_ID_YT8521 0x0000011a
|
|
+#define PHY_ID_YT8531 0x4f51e91b
|
|
#define PHY_ID_YT8531S 0x4f51e91a
|
|
|
|
/* YT8521/YT8531S Register Overview
|
|
@@ -517,6 +518,61 @@ err_restore_page:
|
|
return phy_restore_page(phydev, old_page, ret);
|
|
}
|
|
|
|
+static int yt8531_set_wol(struct phy_device *phydev,
|
|
+ struct ethtool_wolinfo *wol)
|
|
+{
|
|
+ const u16 mac_addr_reg[] = {
|
|
+ YTPHY_WOL_MACADDR2_REG,
|
|
+ YTPHY_WOL_MACADDR1_REG,
|
|
+ YTPHY_WOL_MACADDR0_REG,
|
|
+ };
|
|
+ const u8 *mac_addr;
|
|
+ u16 mask, val;
|
|
+ int ret;
|
|
+ u8 i;
|
|
+
|
|
+ if (wol->wolopts & WAKE_MAGIC) {
|
|
+ mac_addr = phydev->attached_dev->dev_addr;
|
|
+
|
|
+ /* Store the device address for the magic packet */
|
|
+ for (i = 0; i < 3; i++) {
|
|
+ ret = ytphy_write_ext_with_lock(phydev, mac_addr_reg[i],
|
|
+ ((mac_addr[i * 2] << 8)) |
|
|
+ (mac_addr[i * 2 + 1]));
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ /* Enable WOL feature */
|
|
+ mask = YTPHY_WCR_PULSE_WIDTH_MASK | YTPHY_WCR_INTR_SEL;
|
|
+ val = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL;
|
|
+ val |= YTPHY_WCR_TYPE_PULSE | YTPHY_WCR_PULSE_WIDTH_672MS;
|
|
+ ret = ytphy_modify_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG,
|
|
+ mask, val);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+
|
|
+ /* Enable WOL interrupt */
|
|
+ ret = phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, 0,
|
|
+ YTPHY_IER_WOL);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+ } else {
|
|
+ /* Disable WOL feature */
|
|
+ mask = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL;
|
|
+ ret = ytphy_modify_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG,
|
|
+ mask, 0);
|
|
+
|
|
+ /* Disable WOL interrupt */
|
|
+ ret = phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG,
|
|
+ YTPHY_IER_WOL, 0);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static int yt8511_read_page(struct phy_device *phydev)
|
|
{
|
|
return __phy_read(phydev, YT8511_PAGE_SELECT);
|
|
@@ -767,6 +823,17 @@ static int ytphy_rgmii_clk_delay_config(
|
|
return ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG, mask, val);
|
|
}
|
|
|
|
+static int ytphy_rgmii_clk_delay_config_with_lock(struct phy_device *phydev)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ phy_lock_mdio_bus(phydev);
|
|
+ ret = ytphy_rgmii_clk_delay_config(phydev);
|
|
+ phy_unlock_mdio_bus(phydev);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
/**
|
|
* yt8521_probe() - read chip config then set suitable polling_mode
|
|
* @phydev: a pointer to a &struct phy_device
|
|
@@ -891,6 +958,43 @@ static int yt8521_probe(struct phy_devic
|
|
val);
|
|
}
|
|
|
|
+static int yt8531_probe(struct phy_device *phydev)
|
|
+{
|
|
+ struct device_node *node = phydev->mdio.dev.of_node;
|
|
+ u16 mask, val;
|
|
+ u32 freq;
|
|
+
|
|
+ if (of_property_read_u32(node, "motorcomm,clk-out-frequency-hz", &freq))
|
|
+ freq = YTPHY_DTS_OUTPUT_CLK_DIS;
|
|
+
|
|
+ switch (freq) {
|
|
+ case YTPHY_DTS_OUTPUT_CLK_DIS:
|
|
+ mask = YT8531_SCR_SYNCE_ENABLE;
|
|
+ val = 0;
|
|
+ break;
|
|
+ case YTPHY_DTS_OUTPUT_CLK_25M:
|
|
+ mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK |
|
|
+ YT8531_SCR_CLK_FRE_SEL_125M;
|
|
+ val = YT8531_SCR_SYNCE_ENABLE |
|
|
+ FIELD_PREP(YT8531_SCR_CLK_SRC_MASK,
|
|
+ YT8531_SCR_CLK_SRC_REF_25M);
|
|
+ break;
|
|
+ case YTPHY_DTS_OUTPUT_CLK_125M:
|
|
+ mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK |
|
|
+ YT8531_SCR_CLK_FRE_SEL_125M;
|
|
+ val = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_FRE_SEL_125M |
|
|
+ FIELD_PREP(YT8531_SCR_CLK_SRC_MASK,
|
|
+ YT8531_SCR_CLK_SRC_PLL_125M);
|
|
+ break;
|
|
+ default:
|
|
+ phydev_warn(phydev, "Freq err:%u\n", freq);
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ return ytphy_modify_ext_with_lock(phydev, YTPHY_SYNCE_CFG_REG, mask,
|
|
+ val);
|
|
+}
|
|
+
|
|
/**
|
|
* ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp
|
|
* @phydev: a pointer to a &struct phy_device
|
|
@@ -1387,6 +1491,94 @@ err_restore_page:
|
|
return phy_restore_page(phydev, old_page, ret);
|
|
}
|
|
|
|
+static int yt8531_config_init(struct phy_device *phydev)
|
|
+{
|
|
+ struct device_node *node = phydev->mdio.dev.of_node;
|
|
+ int ret;
|
|
+
|
|
+ ret = ytphy_rgmii_clk_delay_config_with_lock(phydev);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+
|
|
+ if (of_property_read_bool(node, "motorcomm,auto-sleep-disabled")) {
|
|
+ /* disable auto sleep */
|
|
+ ret = ytphy_modify_ext_with_lock(phydev,
|
|
+ YT8521_EXTREG_SLEEP_CONTROL1_REG,
|
|
+ YT8521_ESC1R_SLEEP_SW, 0);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ if (of_property_read_bool(node, "motorcomm,keep-pll-enabled")) {
|
|
+ /* enable RXC clock when no wire plug */
|
|
+ ret = ytphy_modify_ext_with_lock(phydev,
|
|
+ YT8521_CLOCK_GATING_REG,
|
|
+ YT8521_CGR_RX_CLK_EN, 0);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * yt8531_link_change_notify() - Adjust the tx clock direction according to
|
|
+ * the current speed and dts config.
|
|
+ * @phydev: a pointer to a &struct phy_device
|
|
+ *
|
|
+ * NOTE: This function is only used to adapt to VF2 with JH7110 SoC. Please
|
|
+ * keep "motorcomm,tx-clk-adj-enabled" not exist in dts when the soc is not
|
|
+ * JH7110.
|
|
+ */
|
|
+static void yt8531_link_change_notify(struct phy_device *phydev)
|
|
+{
|
|
+ struct device_node *node = phydev->mdio.dev.of_node;
|
|
+ bool tx_clk_adj_enabled = false;
|
|
+ bool tx_clk_1000_inverted;
|
|
+ bool tx_clk_100_inverted;
|
|
+ bool tx_clk_10_inverted;
|
|
+ u16 val = 0;
|
|
+ int ret;
|
|
+
|
|
+ if (of_property_read_bool(node, "motorcomm,tx-clk-adj-enabled"))
|
|
+ tx_clk_adj_enabled = true;
|
|
+
|
|
+ if (!tx_clk_adj_enabled)
|
|
+ return;
|
|
+
|
|
+ if (of_property_read_bool(node, "motorcomm,tx-clk-10-inverted"))
|
|
+ tx_clk_10_inverted = true;
|
|
+ if (of_property_read_bool(node, "motorcomm,tx-clk-100-inverted"))
|
|
+ tx_clk_100_inverted = true;
|
|
+ if (of_property_read_bool(node, "motorcomm,tx-clk-1000-inverted"))
|
|
+ tx_clk_1000_inverted = true;
|
|
+
|
|
+ if (phydev->speed < 0)
|
|
+ return;
|
|
+
|
|
+ switch (phydev->speed) {
|
|
+ case SPEED_1000:
|
|
+ if (tx_clk_1000_inverted)
|
|
+ val = YT8521_RC1R_TX_CLK_SEL_INVERTED;
|
|
+ break;
|
|
+ case SPEED_100:
|
|
+ if (tx_clk_100_inverted)
|
|
+ val = YT8521_RC1R_TX_CLK_SEL_INVERTED;
|
|
+ break;
|
|
+ case SPEED_10:
|
|
+ if (tx_clk_10_inverted)
|
|
+ val = YT8521_RC1R_TX_CLK_SEL_INVERTED;
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ ret = ytphy_modify_ext_with_lock(phydev, YT8521_RGMII_CONFIG1_REG,
|
|
+ YT8521_RC1R_TX_CLK_SEL_INVERTED, val);
|
|
+ if (ret < 0)
|
|
+ phydev_warn(phydev, "Modify TX_CLK_SEL err:%d\n", ret);
|
|
+}
|
|
+
|
|
/**
|
|
* yt8521_prepare_fiber_features() - A small helper function that setup
|
|
* fiber's features.
|
|
@@ -1970,6 +2162,17 @@ static struct phy_driver motorcomm_phy_d
|
|
.resume = yt8521_resume,
|
|
},
|
|
{
|
|
+ PHY_ID_MATCH_EXACT(PHY_ID_YT8531),
|
|
+ .name = "YT8531 Gigabit Ethernet",
|
|
+ .probe = yt8531_probe,
|
|
+ .config_init = yt8531_config_init,
|
|
+ .suspend = genphy_suspend,
|
|
+ .resume = genphy_resume,
|
|
+ .get_wol = ytphy_get_wol,
|
|
+ .set_wol = yt8531_set_wol,
|
|
+ .link_change_notify = yt8531_link_change_notify,
|
|
+ },
|
|
+ {
|
|
PHY_ID_MATCH_EXACT(PHY_ID_YT8531S),
|
|
.name = "YT8531S Gigabit Ethernet",
|
|
.get_features = yt8521_get_features,
|
|
@@ -1990,7 +2193,7 @@ static struct phy_driver motorcomm_phy_d
|
|
|
|
module_phy_driver(motorcomm_phy_drvs);
|
|
|
|
-MODULE_DESCRIPTION("Motorcomm 8511/8521/8531S PHY driver");
|
|
+MODULE_DESCRIPTION("Motorcomm 8511/8521/8531/8531S PHY driver");
|
|
MODULE_AUTHOR("Peter Geis");
|
|
MODULE_AUTHOR("Frank");
|
|
MODULE_LICENSE("GPL");
|
|
@@ -1998,6 +2201,7 @@ MODULE_LICENSE("GPL");
|
|
static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = {
|
|
{ PHY_ID_MATCH_EXACT(PHY_ID_YT8511) },
|
|
{ PHY_ID_MATCH_EXACT(PHY_ID_YT8521) },
|
|
+ { PHY_ID_MATCH_EXACT(PHY_ID_YT8531) },
|
|
{ PHY_ID_MATCH_EXACT(PHY_ID_YT8531S) },
|
|
{ /* sentinel */ }
|
|
};
|