mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 10:39:04 +00:00
7d256aff7b
The previous iteration of MediaTek's PHY patches caused various weird bugs. Drop culprit patch 733-10-net-phy-mediatek-Extend-1G-TX-RX-link-pulse-time.patch and use the most recent iteration of the patchset which has been posted to the netdev mailing list. Link: https://patchwork.kernel.org/project/netdevbpf/list/?series=895513&state=* Fixes: #16448 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3515 lines
106 KiB
Diff
3515 lines
106 KiB
Diff
From 656f5fdeb6ee6fa95c28cab3b535e2e09ef59c57 Mon Sep 17 00:00:00 2001
|
|
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
|
|
Date: Fri, 4 Oct 2024 18:24:05 +0800
|
|
Subject: [PATCH 1/9] net: phy: mediatek: Re-organize MediaTek ethernet phy
|
|
drivers
|
|
|
|
Re-organize MediaTek ethernet phy driver files and get ready to integrate
|
|
some common functions (and add new 2.5G phy driver).
|
|
mtk-ge.c: MT7530 Gphy on MT7621 & MT7531 Gphy
|
|
mtk-ge-soc.c: Built-in Gphy on MT7981 & Built-in switch Gphy on MT7988
|
|
(mtk-2p5ge.c: Planned for built-in 2.5G phy on MT7988
|
|
--> in another patchset)
|
|
|
|
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
|
|
---
|
|
drivers/net/phy/Kconfig | 17 +-------------
|
|
drivers/net/phy/Makefile | 3 +--
|
|
drivers/net/phy/mediatek/Kconfig | 22 +++++++++++++++++++
|
|
drivers/net/phy/mediatek/Makefile | 3 +++
|
|
.../mtk-ge-soc.c} | 0
|
|
.../phy/{mediatek-ge.c => mediatek/mtk-ge.c} | 0
|
|
6 files changed, 27 insertions(+), 18 deletions(-)
|
|
create mode 100644 drivers/net/phy/mediatek/Kconfig
|
|
create mode 100644 drivers/net/phy/mediatek/Makefile
|
|
rename drivers/net/phy/{mediatek-ge-soc.c => mediatek/mtk-ge-soc.c} (100%)
|
|
rename drivers/net/phy/{mediatek-ge.c => mediatek/mtk-ge.c} (100%)
|
|
|
|
--- a/drivers/net/phy/Kconfig
|
|
+++ b/drivers/net/phy/Kconfig
|
|
@@ -313,22 +313,7 @@ config MAXLINEAR_GPHY
|
|
Support for the Maxlinear GPY115, GPY211, GPY212, GPY215,
|
|
GPY241, GPY245 PHYs.
|
|
|
|
-config MEDIATEK_GE_PHY
|
|
- tristate "MediaTek Gigabit Ethernet PHYs"
|
|
- help
|
|
- Supports the MediaTek Gigabit Ethernet PHYs.
|
|
-
|
|
-config MEDIATEK_GE_SOC_PHY
|
|
- tristate "MediaTek SoC Ethernet PHYs"
|
|
- depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
|
|
- depends on NVMEM_MTK_EFUSE
|
|
- help
|
|
- Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
|
|
-
|
|
- Include support for built-in Ethernet PHYs which are present in
|
|
- the MT7981 and MT7988 SoCs. These PHYs need calibration data
|
|
- present in the SoCs efuse and will dynamically calibrate VCM
|
|
- (common-mode voltage) during startup.
|
|
+source "drivers/net/phy/mediatek/Kconfig"
|
|
|
|
config MICREL_PHY
|
|
tristate "Micrel PHYs"
|
|
--- a/drivers/net/phy/Makefile
|
|
+++ b/drivers/net/phy/Makefile
|
|
@@ -82,8 +82,7 @@ obj-$(CONFIG_MARVELL_PHY) += marvell.o
|
|
obj-$(CONFIG_MARVELL_88Q2XXX_PHY) += marvell-88q2xxx.o
|
|
obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o
|
|
obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o
|
|
-obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o
|
|
-obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mediatek-ge-soc.o
|
|
+obj-y += mediatek/
|
|
obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o
|
|
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
|
|
obj-$(CONFIG_MICREL_PHY) += micrel.o
|
|
--- /dev/null
|
|
+++ b/drivers/net/phy/mediatek/Kconfig
|
|
@@ -0,0 +1,22 @@
|
|
+# SPDX-License-Identifier: GPL-2.0-only
|
|
+config MEDIATEK_GE_PHY
|
|
+ tristate "MediaTek Gigabit Ethernet PHYs"
|
|
+ help
|
|
+ Supports the MediaTek non-built-in Gigabit Ethernet PHYs.
|
|
+
|
|
+ Non-built-in Gigabit Ethernet PHYs include mt7530/mt7531.
|
|
+ You may find mt7530 inside mt7621. This driver shares some
|
|
+ common operations with MediaTek SoC built-in Gigabit
|
|
+ Ethernet PHYs.
|
|
+
|
|
+config MEDIATEK_GE_SOC_PHY
|
|
+ tristate "MediaTek SoC Ethernet PHYs"
|
|
+ depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
|
|
+ select NVMEM_MTK_EFUSE
|
|
+ help
|
|
+ Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
|
|
+
|
|
+ Include support for built-in Ethernet PHYs which are present in
|
|
+ the MT7981 and MT7988 SoCs. These PHYs need calibration data
|
|
+ present in the SoCs efuse and will dynamically calibrate VCM
|
|
+ (common-mode voltage) during startup.
|
|
--- /dev/null
|
|
+++ b/drivers/net/phy/mediatek/Makefile
|
|
@@ -0,0 +1,3 @@
|
|
+# SPDX-License-Identifier: GPL-2.0
|
|
+obj-$(CONFIG_MEDIATEK_GE_PHY) += mtk-ge.o
|
|
+obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mtk-ge-soc.o
|
|
--- a/drivers/net/phy/mediatek-ge-soc.c
|
|
+++ /dev/null
|
|
@@ -1,1555 +0,0 @@
|
|
-// SPDX-License-Identifier: GPL-2.0+
|
|
-#include <linux/bitfield.h>
|
|
-#include <linux/bitmap.h>
|
|
-#include <linux/mfd/syscon.h>
|
|
-#include <linux/module.h>
|
|
-#include <linux/nvmem-consumer.h>
|
|
-#include <linux/pinctrl/consumer.h>
|
|
-#include <linux/phy.h>
|
|
-#include <linux/regmap.h>
|
|
-
|
|
-#define MTK_GPHY_ID_MT7981 0x03a29461
|
|
-#define MTK_GPHY_ID_MT7988 0x03a29481
|
|
-
|
|
-#define MTK_EXT_PAGE_ACCESS 0x1f
|
|
-#define MTK_PHY_PAGE_STANDARD 0x0000
|
|
-#define MTK_PHY_PAGE_EXTENDED_3 0x0003
|
|
-
|
|
-#define MTK_PHY_LPI_REG_14 0x14
|
|
-#define MTK_PHY_LPI_WAKE_TIMER_1000_MASK GENMASK(8, 0)
|
|
-
|
|
-#define MTK_PHY_LPI_REG_1c 0x1c
|
|
-#define MTK_PHY_SMI_DET_ON_THRESH_MASK GENMASK(13, 8)
|
|
-
|
|
-#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
|
|
-#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
|
|
-
|
|
-#define ANALOG_INTERNAL_OPERATION_MAX_US 20
|
|
-#define TXRESERVE_MIN 0
|
|
-#define TXRESERVE_MAX 7
|
|
-
|
|
-#define MTK_PHY_ANARG_RG 0x10
|
|
-#define MTK_PHY_TCLKOFFSET_MASK GENMASK(12, 8)
|
|
-
|
|
-/* Registers on MDIO_MMD_VEND1 */
|
|
-#define MTK_PHY_TXVLD_DA_RG 0x12
|
|
-#define MTK_PHY_DA_TX_I2MPB_A_GBE_MASK GENMASK(15, 10)
|
|
-#define MTK_PHY_DA_TX_I2MPB_A_TBT_MASK GENMASK(5, 0)
|
|
-
|
|
-#define MTK_PHY_TX_I2MPB_TEST_MODE_A2 0x16
|
|
-#define MTK_PHY_DA_TX_I2MPB_A_HBT_MASK GENMASK(15, 10)
|
|
-#define MTK_PHY_DA_TX_I2MPB_A_TST_MASK GENMASK(5, 0)
|
|
-
|
|
-#define MTK_PHY_TX_I2MPB_TEST_MODE_B1 0x17
|
|
-#define MTK_PHY_DA_TX_I2MPB_B_GBE_MASK GENMASK(13, 8)
|
|
-#define MTK_PHY_DA_TX_I2MPB_B_TBT_MASK GENMASK(5, 0)
|
|
-
|
|
-#define MTK_PHY_TX_I2MPB_TEST_MODE_B2 0x18
|
|
-#define MTK_PHY_DA_TX_I2MPB_B_HBT_MASK GENMASK(13, 8)
|
|
-#define MTK_PHY_DA_TX_I2MPB_B_TST_MASK GENMASK(5, 0)
|
|
-
|
|
-#define MTK_PHY_TX_I2MPB_TEST_MODE_C1 0x19
|
|
-#define MTK_PHY_DA_TX_I2MPB_C_GBE_MASK GENMASK(13, 8)
|
|
-#define MTK_PHY_DA_TX_I2MPB_C_TBT_MASK GENMASK(5, 0)
|
|
-
|
|
-#define MTK_PHY_TX_I2MPB_TEST_MODE_C2 0x20
|
|
-#define MTK_PHY_DA_TX_I2MPB_C_HBT_MASK GENMASK(13, 8)
|
|
-#define MTK_PHY_DA_TX_I2MPB_C_TST_MASK GENMASK(5, 0)
|
|
-
|
|
-#define MTK_PHY_TX_I2MPB_TEST_MODE_D1 0x21
|
|
-#define MTK_PHY_DA_TX_I2MPB_D_GBE_MASK GENMASK(13, 8)
|
|
-#define MTK_PHY_DA_TX_I2MPB_D_TBT_MASK GENMASK(5, 0)
|
|
-
|
|
-#define MTK_PHY_TX_I2MPB_TEST_MODE_D2 0x22
|
|
-#define MTK_PHY_DA_TX_I2MPB_D_HBT_MASK GENMASK(13, 8)
|
|
-#define MTK_PHY_DA_TX_I2MPB_D_TST_MASK GENMASK(5, 0)
|
|
-
|
|
-#define MTK_PHY_RXADC_CTRL_RG7 0xc6
|
|
-#define MTK_PHY_DA_AD_BUF_BIAS_LP_MASK GENMASK(9, 8)
|
|
-
|
|
-#define MTK_PHY_RXADC_CTRL_RG9 0xc8
|
|
-#define MTK_PHY_DA_RX_PSBN_TBT_MASK GENMASK(14, 12)
|
|
-#define MTK_PHY_DA_RX_PSBN_HBT_MASK GENMASK(10, 8)
|
|
-#define MTK_PHY_DA_RX_PSBN_GBE_MASK GENMASK(6, 4)
|
|
-#define MTK_PHY_DA_RX_PSBN_LP_MASK GENMASK(2, 0)
|
|
-
|
|
-#define MTK_PHY_LDO_OUTPUT_V 0xd7
|
|
-
|
|
-#define MTK_PHY_RG_ANA_CAL_RG0 0xdb
|
|
-#define MTK_PHY_RG_CAL_CKINV BIT(12)
|
|
-#define MTK_PHY_RG_ANA_CALEN BIT(8)
|
|
-#define MTK_PHY_RG_ZCALEN_A BIT(0)
|
|
-
|
|
-#define MTK_PHY_RG_ANA_CAL_RG1 0xdc
|
|
-#define MTK_PHY_RG_ZCALEN_B BIT(12)
|
|
-#define MTK_PHY_RG_ZCALEN_C BIT(8)
|
|
-#define MTK_PHY_RG_ZCALEN_D BIT(4)
|
|
-#define MTK_PHY_RG_TXVOS_CALEN BIT(0)
|
|
-
|
|
-#define MTK_PHY_RG_ANA_CAL_RG5 0xe0
|
|
-#define MTK_PHY_RG_REXT_TRIM_MASK GENMASK(13, 8)
|
|
-
|
|
-#define MTK_PHY_RG_TX_FILTER 0xfe
|
|
-
|
|
-#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120 0x120
|
|
-#define MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK GENMASK(12, 8)
|
|
-#define MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK GENMASK(4, 0)
|
|
-
|
|
-#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122 0x122
|
|
-#define MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK GENMASK(7, 0)
|
|
-
|
|
-#define MTK_PHY_RG_TESTMUX_ADC_CTRL 0x144
|
|
-#define MTK_PHY_RG_TXEN_DIG_MASK GENMASK(5, 5)
|
|
-
|
|
-#define MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B 0x172
|
|
-#define MTK_PHY_CR_TX_AMP_OFFSET_A_MASK GENMASK(13, 8)
|
|
-#define MTK_PHY_CR_TX_AMP_OFFSET_B_MASK GENMASK(6, 0)
|
|
-
|
|
-#define MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D 0x173
|
|
-#define MTK_PHY_CR_TX_AMP_OFFSET_C_MASK GENMASK(13, 8)
|
|
-#define MTK_PHY_CR_TX_AMP_OFFSET_D_MASK GENMASK(6, 0)
|
|
-
|
|
-#define MTK_PHY_RG_AD_CAL_COMP 0x17a
|
|
-#define MTK_PHY_AD_CAL_COMP_OUT_SHIFT (8)
|
|
-
|
|
-#define MTK_PHY_RG_AD_CAL_CLK 0x17b
|
|
-#define MTK_PHY_DA_CAL_CLK BIT(0)
|
|
-
|
|
-#define MTK_PHY_RG_AD_CALIN 0x17c
|
|
-#define MTK_PHY_DA_CALIN_FLAG BIT(0)
|
|
-
|
|
-#define MTK_PHY_RG_DASN_DAC_IN0_A 0x17d
|
|
-#define MTK_PHY_DASN_DAC_IN0_A_MASK GENMASK(9, 0)
|
|
-
|
|
-#define MTK_PHY_RG_DASN_DAC_IN0_B 0x17e
|
|
-#define MTK_PHY_DASN_DAC_IN0_B_MASK GENMASK(9, 0)
|
|
-
|
|
-#define MTK_PHY_RG_DASN_DAC_IN0_C 0x17f
|
|
-#define MTK_PHY_DASN_DAC_IN0_C_MASK GENMASK(9, 0)
|
|
-
|
|
-#define MTK_PHY_RG_DASN_DAC_IN0_D 0x180
|
|
-#define MTK_PHY_DASN_DAC_IN0_D_MASK GENMASK(9, 0)
|
|
-
|
|
-#define MTK_PHY_RG_DASN_DAC_IN1_A 0x181
|
|
-#define MTK_PHY_DASN_DAC_IN1_A_MASK GENMASK(9, 0)
|
|
-
|
|
-#define MTK_PHY_RG_DASN_DAC_IN1_B 0x182
|
|
-#define MTK_PHY_DASN_DAC_IN1_B_MASK GENMASK(9, 0)
|
|
-
|
|
-#define MTK_PHY_RG_DASN_DAC_IN1_C 0x183
|
|
-#define MTK_PHY_DASN_DAC_IN1_C_MASK GENMASK(9, 0)
|
|
-
|
|
-#define MTK_PHY_RG_DASN_DAC_IN1_D 0x184
|
|
-#define MTK_PHY_DASN_DAC_IN1_D_MASK GENMASK(9, 0)
|
|
-
|
|
-#define MTK_PHY_RG_DEV1E_REG19b 0x19b
|
|
-#define MTK_PHY_BYPASS_DSP_LPI_READY BIT(8)
|
|
-
|
|
-#define MTK_PHY_RG_LP_IIR2_K1_L 0x22a
|
|
-#define MTK_PHY_RG_LP_IIR2_K1_U 0x22b
|
|
-#define MTK_PHY_RG_LP_IIR2_K2_L 0x22c
|
|
-#define MTK_PHY_RG_LP_IIR2_K2_U 0x22d
|
|
-#define MTK_PHY_RG_LP_IIR2_K3_L 0x22e
|
|
-#define MTK_PHY_RG_LP_IIR2_K3_U 0x22f
|
|
-#define MTK_PHY_RG_LP_IIR2_K4_L 0x230
|
|
-#define MTK_PHY_RG_LP_IIR2_K4_U 0x231
|
|
-#define MTK_PHY_RG_LP_IIR2_K5_L 0x232
|
|
-#define MTK_PHY_RG_LP_IIR2_K5_U 0x233
|
|
-
|
|
-#define MTK_PHY_RG_DEV1E_REG234 0x234
|
|
-#define MTK_PHY_TR_OPEN_LOOP_EN_MASK GENMASK(0, 0)
|
|
-#define MTK_PHY_LPF_X_AVERAGE_MASK GENMASK(7, 4)
|
|
-#define MTK_PHY_TR_LP_IIR_EEE_EN BIT(12)
|
|
-
|
|
-#define MTK_PHY_RG_LPF_CNT_VAL 0x235
|
|
-
|
|
-#define MTK_PHY_RG_DEV1E_REG238 0x238
|
|
-#define MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK GENMASK(8, 0)
|
|
-#define MTK_PHY_LPI_SLV_SEND_TX_EN BIT(12)
|
|
-
|
|
-#define MTK_PHY_RG_DEV1E_REG239 0x239
|
|
-#define MTK_PHY_LPI_SEND_LOC_TIMER_MASK GENMASK(8, 0)
|
|
-#define MTK_PHY_LPI_TXPCS_LOC_RCV BIT(12)
|
|
-
|
|
-#define MTK_PHY_RG_DEV1E_REG27C 0x27c
|
|
-#define MTK_PHY_VGASTATE_FFE_THR_ST1_MASK GENMASK(12, 8)
|
|
-#define MTK_PHY_RG_DEV1E_REG27D 0x27d
|
|
-#define MTK_PHY_VGASTATE_FFE_THR_ST2_MASK GENMASK(4, 0)
|
|
-
|
|
-#define MTK_PHY_RG_DEV1E_REG2C7 0x2c7
|
|
-#define MTK_PHY_MAX_GAIN_MASK GENMASK(4, 0)
|
|
-#define MTK_PHY_MIN_GAIN_MASK GENMASK(12, 8)
|
|
-
|
|
-#define MTK_PHY_RG_DEV1E_REG2D1 0x2d1
|
|
-#define MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK GENMASK(7, 0)
|
|
-#define MTK_PHY_LPI_SKIP_SD_SLV_TR BIT(8)
|
|
-#define MTK_PHY_LPI_TR_READY BIT(9)
|
|
-#define MTK_PHY_LPI_VCO_EEE_STG0_EN BIT(10)
|
|
-
|
|
-#define MTK_PHY_RG_DEV1E_REG323 0x323
|
|
-#define MTK_PHY_EEE_WAKE_MAS_INT_DC BIT(0)
|
|
-#define MTK_PHY_EEE_WAKE_SLV_INT_DC BIT(4)
|
|
-
|
|
-#define MTK_PHY_RG_DEV1E_REG324 0x324
|
|
-#define MTK_PHY_SMI_DETCNT_MAX_MASK GENMASK(5, 0)
|
|
-#define MTK_PHY_SMI_DET_MAX_EN BIT(8)
|
|
-
|
|
-#define MTK_PHY_RG_DEV1E_REG326 0x326
|
|
-#define MTK_PHY_LPI_MODE_SD_ON BIT(0)
|
|
-#define MTK_PHY_RESET_RANDUPD_CNT BIT(1)
|
|
-#define MTK_PHY_TREC_UPDATE_ENAB_CLR BIT(2)
|
|
-#define MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF BIT(4)
|
|
-#define MTK_PHY_TR_READY_SKIP_AFE_WAKEUP BIT(5)
|
|
-
|
|
-#define MTK_PHY_LDO_PUMP_EN_PAIRAB 0x502
|
|
-#define MTK_PHY_LDO_PUMP_EN_PAIRCD 0x503
|
|
-
|
|
-#define MTK_PHY_DA_TX_R50_PAIR_A 0x53d
|
|
-#define MTK_PHY_DA_TX_R50_PAIR_B 0x53e
|
|
-#define MTK_PHY_DA_TX_R50_PAIR_C 0x53f
|
|
-#define MTK_PHY_DA_TX_R50_PAIR_D 0x540
|
|
-
|
|
-/* Registers on MDIO_MMD_VEND2 */
|
|
-#define MTK_PHY_LED0_ON_CTRL 0x24
|
|
-#define MTK_PHY_LED1_ON_CTRL 0x26
|
|
-#define MTK_PHY_LED_ON_MASK GENMASK(6, 0)
|
|
-#define MTK_PHY_LED_ON_LINK1000 BIT(0)
|
|
-#define MTK_PHY_LED_ON_LINK100 BIT(1)
|
|
-#define MTK_PHY_LED_ON_LINK10 BIT(2)
|
|
-#define MTK_PHY_LED_ON_LINK (MTK_PHY_LED_ON_LINK10 |\
|
|
- MTK_PHY_LED_ON_LINK100 |\
|
|
- MTK_PHY_LED_ON_LINK1000)
|
|
-#define MTK_PHY_LED_ON_LINKDOWN BIT(3)
|
|
-#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */
|
|
-#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */
|
|
-#define MTK_PHY_LED_ON_FORCE_ON BIT(6)
|
|
-#define MTK_PHY_LED_ON_POLARITY BIT(14)
|
|
-#define MTK_PHY_LED_ON_ENABLE BIT(15)
|
|
-
|
|
-#define MTK_PHY_LED0_BLINK_CTRL 0x25
|
|
-#define MTK_PHY_LED1_BLINK_CTRL 0x27
|
|
-#define MTK_PHY_LED_BLINK_1000TX BIT(0)
|
|
-#define MTK_PHY_LED_BLINK_1000RX BIT(1)
|
|
-#define MTK_PHY_LED_BLINK_100TX BIT(2)
|
|
-#define MTK_PHY_LED_BLINK_100RX BIT(3)
|
|
-#define MTK_PHY_LED_BLINK_10TX BIT(4)
|
|
-#define MTK_PHY_LED_BLINK_10RX BIT(5)
|
|
-#define MTK_PHY_LED_BLINK_RX (MTK_PHY_LED_BLINK_10RX |\
|
|
- MTK_PHY_LED_BLINK_100RX |\
|
|
- MTK_PHY_LED_BLINK_1000RX)
|
|
-#define MTK_PHY_LED_BLINK_TX (MTK_PHY_LED_BLINK_10TX |\
|
|
- MTK_PHY_LED_BLINK_100TX |\
|
|
- MTK_PHY_LED_BLINK_1000TX)
|
|
-#define MTK_PHY_LED_BLINK_COLLISION BIT(6)
|
|
-#define MTK_PHY_LED_BLINK_RX_CRC_ERR BIT(7)
|
|
-#define MTK_PHY_LED_BLINK_RX_IDLE_ERR BIT(8)
|
|
-#define MTK_PHY_LED_BLINK_FORCE_BLINK BIT(9)
|
|
-
|
|
-#define MTK_PHY_LED1_DEFAULT_POLARITIES BIT(1)
|
|
-
|
|
-#define MTK_PHY_RG_BG_RASEL 0x115
|
|
-#define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0)
|
|
-
|
|
-/* 'boottrap' register reflecting the configuration of the 4 PHY LEDs */
|
|
-#define RG_GPIO_MISC_TPBANK0 0x6f0
|
|
-#define RG_GPIO_MISC_TPBANK0_BOOTMODE GENMASK(11, 8)
|
|
-
|
|
-/* These macro privides efuse parsing for internal phy. */
|
|
-#define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0))
|
|
-#define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0))
|
|
-#define EFS_DA_TX_I2MPB_C(x) (((x) >> 12) & GENMASK(5, 0))
|
|
-#define EFS_DA_TX_I2MPB_D(x) (((x) >> 18) & GENMASK(5, 0))
|
|
-#define EFS_DA_TX_AMP_OFFSET_A(x) (((x) >> 24) & GENMASK(5, 0))
|
|
-
|
|
-#define EFS_DA_TX_AMP_OFFSET_B(x) (((x) >> 0) & GENMASK(5, 0))
|
|
-#define EFS_DA_TX_AMP_OFFSET_C(x) (((x) >> 6) & GENMASK(5, 0))
|
|
-#define EFS_DA_TX_AMP_OFFSET_D(x) (((x) >> 12) & GENMASK(5, 0))
|
|
-#define EFS_DA_TX_R50_A(x) (((x) >> 18) & GENMASK(5, 0))
|
|
-#define EFS_DA_TX_R50_B(x) (((x) >> 24) & GENMASK(5, 0))
|
|
-
|
|
-#define EFS_DA_TX_R50_C(x) (((x) >> 0) & GENMASK(5, 0))
|
|
-#define EFS_DA_TX_R50_D(x) (((x) >> 6) & GENMASK(5, 0))
|
|
-
|
|
-#define EFS_RG_BG_RASEL(x) (((x) >> 4) & GENMASK(2, 0))
|
|
-#define EFS_RG_REXT_TRIM(x) (((x) >> 7) & GENMASK(5, 0))
|
|
-
|
|
-enum {
|
|
- NO_PAIR,
|
|
- PAIR_A,
|
|
- PAIR_B,
|
|
- PAIR_C,
|
|
- PAIR_D,
|
|
-};
|
|
-
|
|
-enum calibration_mode {
|
|
- EFUSE_K,
|
|
- SW_K
|
|
-};
|
|
-
|
|
-enum CAL_ITEM {
|
|
- REXT,
|
|
- TX_OFFSET,
|
|
- TX_AMP,
|
|
- TX_R50,
|
|
- TX_VCM
|
|
-};
|
|
-
|
|
-enum CAL_MODE {
|
|
- EFUSE_M,
|
|
- SW_M
|
|
-};
|
|
-
|
|
-#define MTK_PHY_LED_STATE_FORCE_ON 0
|
|
-#define MTK_PHY_LED_STATE_FORCE_BLINK 1
|
|
-#define MTK_PHY_LED_STATE_NETDEV 2
|
|
-
|
|
-struct mtk_socphy_priv {
|
|
- unsigned long led_state;
|
|
-};
|
|
-
|
|
-struct mtk_socphy_shared {
|
|
- u32 boottrap;
|
|
- struct mtk_socphy_priv priv[4];
|
|
-};
|
|
-
|
|
-static int mtk_socphy_read_page(struct phy_device *phydev)
|
|
-{
|
|
- return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
|
|
-}
|
|
-
|
|
-static int mtk_socphy_write_page(struct phy_device *phydev, int page)
|
|
-{
|
|
- return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
|
|
-}
|
|
-
|
|
-/* One calibration cycle consists of:
|
|
- * 1.Set DA_CALIN_FLAG high to start calibration. Keep it high
|
|
- * until AD_CAL_COMP is ready to output calibration result.
|
|
- * 2.Wait until DA_CAL_CLK is available.
|
|
- * 3.Fetch AD_CAL_COMP_OUT.
|
|
- */
|
|
-static int cal_cycle(struct phy_device *phydev, int devad,
|
|
- u32 regnum, u16 mask, u16 cal_val)
|
|
-{
|
|
- int reg_val;
|
|
- int ret;
|
|
-
|
|
- phy_modify_mmd(phydev, devad, regnum,
|
|
- mask, cal_val);
|
|
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
|
|
- MTK_PHY_DA_CALIN_FLAG);
|
|
-
|
|
- ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_AD_CAL_CLK, reg_val,
|
|
- reg_val & MTK_PHY_DA_CAL_CLK, 500,
|
|
- ANALOG_INTERNAL_OPERATION_MAX_US, false);
|
|
- if (ret) {
|
|
- phydev_err(phydev, "Calibration cycle timeout\n");
|
|
- return ret;
|
|
- }
|
|
-
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
|
|
- MTK_PHY_DA_CALIN_FLAG);
|
|
- ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >>
|
|
- MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
|
|
- phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret);
|
|
-
|
|
- return ret;
|
|
-}
|
|
-
|
|
-static int rext_fill_result(struct phy_device *phydev, u16 *buf)
|
|
-{
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5,
|
|
- MTK_PHY_RG_REXT_TRIM_MASK, buf[0] << 8);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_BG_RASEL,
|
|
- MTK_PHY_RG_BG_RASEL_MASK, buf[1]);
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int rext_cal_efuse(struct phy_device *phydev, u32 *buf)
|
|
-{
|
|
- u16 rext_cal_val[2];
|
|
-
|
|
- rext_cal_val[0] = EFS_RG_REXT_TRIM(buf[3]);
|
|
- rext_cal_val[1] = EFS_RG_BG_RASEL(buf[3]);
|
|
- rext_fill_result(phydev, rext_cal_val);
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int tx_offset_fill_result(struct phy_device *phydev, u16 *buf)
|
|
-{
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
|
|
- MTK_PHY_CR_TX_AMP_OFFSET_A_MASK, buf[0] << 8);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
|
|
- MTK_PHY_CR_TX_AMP_OFFSET_B_MASK, buf[1]);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
|
|
- MTK_PHY_CR_TX_AMP_OFFSET_C_MASK, buf[2] << 8);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
|
|
- MTK_PHY_CR_TX_AMP_OFFSET_D_MASK, buf[3]);
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int tx_offset_cal_efuse(struct phy_device *phydev, u32 *buf)
|
|
-{
|
|
- u16 tx_offset_cal_val[4];
|
|
-
|
|
- tx_offset_cal_val[0] = EFS_DA_TX_AMP_OFFSET_A(buf[0]);
|
|
- tx_offset_cal_val[1] = EFS_DA_TX_AMP_OFFSET_B(buf[1]);
|
|
- tx_offset_cal_val[2] = EFS_DA_TX_AMP_OFFSET_C(buf[1]);
|
|
- tx_offset_cal_val[3] = EFS_DA_TX_AMP_OFFSET_D(buf[1]);
|
|
-
|
|
- tx_offset_fill_result(phydev, tx_offset_cal_val);
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int tx_amp_fill_result(struct phy_device *phydev, u16 *buf)
|
|
-{
|
|
- int i;
|
|
- int bias[16] = {};
|
|
- const int vals_9461[16] = { 7, 1, 4, 7,
|
|
- 7, 1, 4, 7,
|
|
- 7, 1, 4, 7,
|
|
- 7, 1, 4, 7 };
|
|
- const int vals_9481[16] = { 10, 6, 6, 10,
|
|
- 10, 6, 6, 10,
|
|
- 10, 6, 6, 10,
|
|
- 10, 6, 6, 10 };
|
|
- switch (phydev->drv->phy_id) {
|
|
- case MTK_GPHY_ID_MT7981:
|
|
- /* We add some calibration to efuse values
|
|
- * due to board level influence.
|
|
- * GBE: +7, TBT: +1, HBT: +4, TST: +7
|
|
- */
|
|
- memcpy(bias, (const void *)vals_9461, sizeof(bias));
|
|
- break;
|
|
- case MTK_GPHY_ID_MT7988:
|
|
- memcpy(bias, (const void *)vals_9481, sizeof(bias));
|
|
- break;
|
|
- }
|
|
-
|
|
- /* Prevent overflow */
|
|
- for (i = 0; i < 12; i++) {
|
|
- if (buf[i >> 2] + bias[i] > 63) {
|
|
- buf[i >> 2] = 63;
|
|
- bias[i] = 0;
|
|
- }
|
|
- }
|
|
-
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
|
|
- MTK_PHY_DA_TX_I2MPB_A_GBE_MASK, (buf[0] + bias[0]) << 10);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
|
|
- MTK_PHY_DA_TX_I2MPB_A_TBT_MASK, buf[0] + bias[1]);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
|
|
- MTK_PHY_DA_TX_I2MPB_A_HBT_MASK, (buf[0] + bias[2]) << 10);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
|
|
- MTK_PHY_DA_TX_I2MPB_A_TST_MASK, buf[0] + bias[3]);
|
|
-
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
|
|
- MTK_PHY_DA_TX_I2MPB_B_GBE_MASK, (buf[1] + bias[4]) << 8);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
|
|
- MTK_PHY_DA_TX_I2MPB_B_TBT_MASK, buf[1] + bias[5]);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
|
|
- MTK_PHY_DA_TX_I2MPB_B_HBT_MASK, (buf[1] + bias[6]) << 8);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
|
|
- MTK_PHY_DA_TX_I2MPB_B_TST_MASK, buf[1] + bias[7]);
|
|
-
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
|
|
- MTK_PHY_DA_TX_I2MPB_C_GBE_MASK, (buf[2] + bias[8]) << 8);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
|
|
- MTK_PHY_DA_TX_I2MPB_C_TBT_MASK, buf[2] + bias[9]);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
|
|
- MTK_PHY_DA_TX_I2MPB_C_HBT_MASK, (buf[2] + bias[10]) << 8);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
|
|
- MTK_PHY_DA_TX_I2MPB_C_TST_MASK, buf[2] + bias[11]);
|
|
-
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
|
|
- MTK_PHY_DA_TX_I2MPB_D_GBE_MASK, (buf[3] + bias[12]) << 8);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
|
|
- MTK_PHY_DA_TX_I2MPB_D_TBT_MASK, buf[3] + bias[13]);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
|
|
- MTK_PHY_DA_TX_I2MPB_D_HBT_MASK, (buf[3] + bias[14]) << 8);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
|
|
- MTK_PHY_DA_TX_I2MPB_D_TST_MASK, buf[3] + bias[15]);
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int tx_amp_cal_efuse(struct phy_device *phydev, u32 *buf)
|
|
-{
|
|
- u16 tx_amp_cal_val[4];
|
|
-
|
|
- tx_amp_cal_val[0] = EFS_DA_TX_I2MPB_A(buf[0]);
|
|
- tx_amp_cal_val[1] = EFS_DA_TX_I2MPB_B(buf[0]);
|
|
- tx_amp_cal_val[2] = EFS_DA_TX_I2MPB_C(buf[0]);
|
|
- tx_amp_cal_val[3] = EFS_DA_TX_I2MPB_D(buf[0]);
|
|
- tx_amp_fill_result(phydev, tx_amp_cal_val);
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int tx_r50_fill_result(struct phy_device *phydev, u16 tx_r50_cal_val,
|
|
- u8 txg_calen_x)
|
|
-{
|
|
- int bias = 0;
|
|
- u16 reg, val;
|
|
-
|
|
- if (phydev->drv->phy_id == MTK_GPHY_ID_MT7988)
|
|
- bias = -1;
|
|
-
|
|
- val = clamp_val(bias + tx_r50_cal_val, 0, 63);
|
|
-
|
|
- switch (txg_calen_x) {
|
|
- case PAIR_A:
|
|
- reg = MTK_PHY_DA_TX_R50_PAIR_A;
|
|
- break;
|
|
- case PAIR_B:
|
|
- reg = MTK_PHY_DA_TX_R50_PAIR_B;
|
|
- break;
|
|
- case PAIR_C:
|
|
- reg = MTK_PHY_DA_TX_R50_PAIR_C;
|
|
- break;
|
|
- case PAIR_D:
|
|
- reg = MTK_PHY_DA_TX_R50_PAIR_D;
|
|
- break;
|
|
- default:
|
|
- return -EINVAL;
|
|
- }
|
|
-
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, val | val << 8);
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int tx_r50_cal_efuse(struct phy_device *phydev, u32 *buf,
|
|
- u8 txg_calen_x)
|
|
-{
|
|
- u16 tx_r50_cal_val;
|
|
-
|
|
- switch (txg_calen_x) {
|
|
- case PAIR_A:
|
|
- tx_r50_cal_val = EFS_DA_TX_R50_A(buf[1]);
|
|
- break;
|
|
- case PAIR_B:
|
|
- tx_r50_cal_val = EFS_DA_TX_R50_B(buf[1]);
|
|
- break;
|
|
- case PAIR_C:
|
|
- tx_r50_cal_val = EFS_DA_TX_R50_C(buf[2]);
|
|
- break;
|
|
- case PAIR_D:
|
|
- tx_r50_cal_val = EFS_DA_TX_R50_D(buf[2]);
|
|
- break;
|
|
- default:
|
|
- return -EINVAL;
|
|
- }
|
|
- tx_r50_fill_result(phydev, tx_r50_cal_val, txg_calen_x);
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int tx_vcm_cal_sw(struct phy_device *phydev, u8 rg_txreserve_x)
|
|
-{
|
|
- u8 lower_idx, upper_idx, txreserve_val;
|
|
- u8 lower_ret, upper_ret;
|
|
- int ret;
|
|
-
|
|
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
|
|
- MTK_PHY_RG_ANA_CALEN);
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
|
|
- MTK_PHY_RG_CAL_CKINV);
|
|
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
|
|
- MTK_PHY_RG_TXVOS_CALEN);
|
|
-
|
|
- switch (rg_txreserve_x) {
|
|
- case PAIR_A:
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_DASN_DAC_IN0_A,
|
|
- MTK_PHY_DASN_DAC_IN0_A_MASK);
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_DASN_DAC_IN1_A,
|
|
- MTK_PHY_DASN_DAC_IN1_A_MASK);
|
|
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_ANA_CAL_RG0,
|
|
- MTK_PHY_RG_ZCALEN_A);
|
|
- break;
|
|
- case PAIR_B:
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_DASN_DAC_IN0_B,
|
|
- MTK_PHY_DASN_DAC_IN0_B_MASK);
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_DASN_DAC_IN1_B,
|
|
- MTK_PHY_DASN_DAC_IN1_B_MASK);
|
|
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_ANA_CAL_RG1,
|
|
- MTK_PHY_RG_ZCALEN_B);
|
|
- break;
|
|
- case PAIR_C:
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_DASN_DAC_IN0_C,
|
|
- MTK_PHY_DASN_DAC_IN0_C_MASK);
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_DASN_DAC_IN1_C,
|
|
- MTK_PHY_DASN_DAC_IN1_C_MASK);
|
|
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_ANA_CAL_RG1,
|
|
- MTK_PHY_RG_ZCALEN_C);
|
|
- break;
|
|
- case PAIR_D:
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_DASN_DAC_IN0_D,
|
|
- MTK_PHY_DASN_DAC_IN0_D_MASK);
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_DASN_DAC_IN1_D,
|
|
- MTK_PHY_DASN_DAC_IN1_D_MASK);
|
|
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_ANA_CAL_RG1,
|
|
- MTK_PHY_RG_ZCALEN_D);
|
|
- break;
|
|
- default:
|
|
- ret = -EINVAL;
|
|
- goto restore;
|
|
- }
|
|
-
|
|
- lower_idx = TXRESERVE_MIN;
|
|
- upper_idx = TXRESERVE_MAX;
|
|
-
|
|
- phydev_dbg(phydev, "Start TX-VCM SW cal.\n");
|
|
- while ((upper_idx - lower_idx) > 1) {
|
|
- txreserve_val = DIV_ROUND_CLOSEST(lower_idx + upper_idx, 2);
|
|
- ret = cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
|
|
- MTK_PHY_DA_RX_PSBN_TBT_MASK |
|
|
- MTK_PHY_DA_RX_PSBN_HBT_MASK |
|
|
- MTK_PHY_DA_RX_PSBN_GBE_MASK |
|
|
- MTK_PHY_DA_RX_PSBN_LP_MASK,
|
|
- txreserve_val << 12 | txreserve_val << 8 |
|
|
- txreserve_val << 4 | txreserve_val);
|
|
- if (ret == 1) {
|
|
- upper_idx = txreserve_val;
|
|
- upper_ret = ret;
|
|
- } else if (ret == 0) {
|
|
- lower_idx = txreserve_val;
|
|
- lower_ret = ret;
|
|
- } else {
|
|
- goto restore;
|
|
- }
|
|
- }
|
|
-
|
|
- if (lower_idx == TXRESERVE_MIN) {
|
|
- lower_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RXADC_CTRL_RG9,
|
|
- MTK_PHY_DA_RX_PSBN_TBT_MASK |
|
|
- MTK_PHY_DA_RX_PSBN_HBT_MASK |
|
|
- MTK_PHY_DA_RX_PSBN_GBE_MASK |
|
|
- MTK_PHY_DA_RX_PSBN_LP_MASK,
|
|
- lower_idx << 12 | lower_idx << 8 |
|
|
- lower_idx << 4 | lower_idx);
|
|
- ret = lower_ret;
|
|
- } else if (upper_idx == TXRESERVE_MAX) {
|
|
- upper_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RXADC_CTRL_RG9,
|
|
- MTK_PHY_DA_RX_PSBN_TBT_MASK |
|
|
- MTK_PHY_DA_RX_PSBN_HBT_MASK |
|
|
- MTK_PHY_DA_RX_PSBN_GBE_MASK |
|
|
- MTK_PHY_DA_RX_PSBN_LP_MASK,
|
|
- upper_idx << 12 | upper_idx << 8 |
|
|
- upper_idx << 4 | upper_idx);
|
|
- ret = upper_ret;
|
|
- }
|
|
- if (ret < 0)
|
|
- goto restore;
|
|
-
|
|
- /* We calibrate TX-VCM in different logic. Check upper index and then
|
|
- * lower index. If this calibration is valid, apply lower index's result.
|
|
- */
|
|
- ret = upper_ret - lower_ret;
|
|
- if (ret == 1) {
|
|
- ret = 0;
|
|
- /* Make sure we use upper_idx in our calibration system */
|
|
- cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
|
|
- MTK_PHY_DA_RX_PSBN_TBT_MASK |
|
|
- MTK_PHY_DA_RX_PSBN_HBT_MASK |
|
|
- MTK_PHY_DA_RX_PSBN_GBE_MASK |
|
|
- MTK_PHY_DA_RX_PSBN_LP_MASK,
|
|
- upper_idx << 12 | upper_idx << 8 |
|
|
- upper_idx << 4 | upper_idx);
|
|
- phydev_dbg(phydev, "TX-VCM SW cal result: 0x%x\n", upper_idx);
|
|
- } else if (lower_idx == TXRESERVE_MIN && upper_ret == 1 &&
|
|
- lower_ret == 1) {
|
|
- ret = 0;
|
|
- cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
|
|
- MTK_PHY_DA_RX_PSBN_TBT_MASK |
|
|
- MTK_PHY_DA_RX_PSBN_HBT_MASK |
|
|
- MTK_PHY_DA_RX_PSBN_GBE_MASK |
|
|
- MTK_PHY_DA_RX_PSBN_LP_MASK,
|
|
- lower_idx << 12 | lower_idx << 8 |
|
|
- lower_idx << 4 | lower_idx);
|
|
- phydev_warn(phydev, "TX-VCM SW cal result at low margin 0x%x\n",
|
|
- lower_idx);
|
|
- } else if (upper_idx == TXRESERVE_MAX && upper_ret == 0 &&
|
|
- lower_ret == 0) {
|
|
- ret = 0;
|
|
- phydev_warn(phydev, "TX-VCM SW cal result at high margin 0x%x\n",
|
|
- upper_idx);
|
|
- } else {
|
|
- ret = -EINVAL;
|
|
- }
|
|
-
|
|
-restore:
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
|
|
- MTK_PHY_RG_ANA_CALEN);
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
|
|
- MTK_PHY_RG_TXVOS_CALEN);
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
|
|
- MTK_PHY_RG_ZCALEN_A);
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
|
|
- MTK_PHY_RG_ZCALEN_B | MTK_PHY_RG_ZCALEN_C |
|
|
- MTK_PHY_RG_ZCALEN_D);
|
|
-
|
|
- return ret;
|
|
-}
|
|
-
|
|
-static void mt798x_phy_common_finetune(struct phy_device *phydev)
|
|
-{
|
|
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
|
|
- /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */
|
|
- __phy_write(phydev, 0x11, 0xc71);
|
|
- __phy_write(phydev, 0x12, 0xc);
|
|
- __phy_write(phydev, 0x10, 0x8fae);
|
|
-
|
|
- /* EnabRandUpdTrig = 1 */
|
|
- __phy_write(phydev, 0x11, 0x2f00);
|
|
- __phy_write(phydev, 0x12, 0xe);
|
|
- __phy_write(phydev, 0x10, 0x8fb0);
|
|
-
|
|
- /* NormMseLoThresh = 85 */
|
|
- __phy_write(phydev, 0x11, 0x55a0);
|
|
- __phy_write(phydev, 0x12, 0x0);
|
|
- __phy_write(phydev, 0x10, 0x83aa);
|
|
-
|
|
- /* FfeUpdGainForce = 1(Enable), FfeUpdGainForceVal = 4 */
|
|
- __phy_write(phydev, 0x11, 0x240);
|
|
- __phy_write(phydev, 0x12, 0x0);
|
|
- __phy_write(phydev, 0x10, 0x9680);
|
|
-
|
|
- /* TrFreeze = 0 (mt7988 default) */
|
|
- __phy_write(phydev, 0x11, 0x0);
|
|
- __phy_write(phydev, 0x12, 0x0);
|
|
- __phy_write(phydev, 0x10, 0x9686);
|
|
-
|
|
- /* SSTrKp100 = 5 */
|
|
- /* SSTrKf100 = 6 */
|
|
- /* SSTrKp1000Mas = 5 */
|
|
- /* SSTrKf1000Mas = 6 */
|
|
- /* SSTrKp1000Slv = 5 */
|
|
- /* SSTrKf1000Slv = 6 */
|
|
- __phy_write(phydev, 0x11, 0xbaef);
|
|
- __phy_write(phydev, 0x12, 0x2e);
|
|
- __phy_write(phydev, 0x10, 0x968c);
|
|
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
|
|
-}
|
|
-
|
|
-static void mt7981_phy_finetune(struct phy_device *phydev)
|
|
-{
|
|
- u16 val[8] = { 0x01ce, 0x01c1,
|
|
- 0x020f, 0x0202,
|
|
- 0x03d0, 0x03c0,
|
|
- 0x0013, 0x0005 };
|
|
- int i, k;
|
|
-
|
|
- /* 100M eye finetune:
|
|
- * Keep middle level of TX MLT3 shapper as default.
|
|
- * Only change TX MLT3 overshoot level here.
|
|
- */
|
|
- for (k = 0, i = 1; i < 12; i++) {
|
|
- if (i % 3 == 0)
|
|
- continue;
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]);
|
|
- }
|
|
-
|
|
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
|
|
- /* ResetSyncOffset = 6 */
|
|
- __phy_write(phydev, 0x11, 0x600);
|
|
- __phy_write(phydev, 0x12, 0x0);
|
|
- __phy_write(phydev, 0x10, 0x8fc0);
|
|
-
|
|
- /* VgaDecRate = 1 */
|
|
- __phy_write(phydev, 0x11, 0x4c2a);
|
|
- __phy_write(phydev, 0x12, 0x3e);
|
|
- __phy_write(phydev, 0x10, 0x8fa4);
|
|
-
|
|
- /* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2,
|
|
- * MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2
|
|
- */
|
|
- __phy_write(phydev, 0x11, 0xd10a);
|
|
- __phy_write(phydev, 0x12, 0x34);
|
|
- __phy_write(phydev, 0x10, 0x8f82);
|
|
-
|
|
- /* VcoSlicerThreshBitsHigh */
|
|
- __phy_write(phydev, 0x11, 0x5555);
|
|
- __phy_write(phydev, 0x12, 0x55);
|
|
- __phy_write(phydev, 0x10, 0x8ec0);
|
|
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
|
|
-
|
|
- /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9 */
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
|
|
- MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
|
|
- BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9));
|
|
-
|
|
- /* rg_tr_lpf_cnt_val = 512 */
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x200);
|
|
-
|
|
- /* IIR2 related */
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_L, 0x82);
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_U, 0x0);
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_L, 0x103);
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_U, 0x0);
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_L, 0x82);
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_U, 0x0);
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_L, 0xd177);
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_U, 0x3);
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_L, 0x2c82);
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_U, 0xe);
|
|
-
|
|
- /* FFE peaking */
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27C,
|
|
- MTK_PHY_VGASTATE_FFE_THR_ST1_MASK, 0x1b << 8);
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27D,
|
|
- MTK_PHY_VGASTATE_FFE_THR_ST2_MASK, 0x1e);
|
|
-
|
|
- /* Disable LDO pump */
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRAB, 0x0);
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRCD, 0x0);
|
|
- /* Adjust LDO output voltage */
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_OUTPUT_V, 0x2222);
|
|
-}
|
|
-
|
|
-static void mt7988_phy_finetune(struct phy_device *phydev)
|
|
-{
|
|
- u16 val[12] = { 0x0187, 0x01cd, 0x01c8, 0x0182,
|
|
- 0x020d, 0x0206, 0x0384, 0x03d0,
|
|
- 0x03c6, 0x030a, 0x0011, 0x0005 };
|
|
- int i;
|
|
-
|
|
- /* Set default MLT3 shaper first */
|
|
- for (i = 0; i < 12; i++)
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[i]);
|
|
-
|
|
- /* TCT finetune */
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5);
|
|
-
|
|
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
|
|
- /* ResetSyncOffset = 5 */
|
|
- __phy_write(phydev, 0x11, 0x500);
|
|
- __phy_write(phydev, 0x12, 0x0);
|
|
- __phy_write(phydev, 0x10, 0x8fc0);
|
|
-
|
|
- /* VgaDecRate is 1 at default on mt7988 */
|
|
-
|
|
- /* MrvlTrFix100Kp = 6, MrvlTrFix100Kf = 7,
|
|
- * MrvlTrFix1000Kp = 6, MrvlTrFix1000Kf = 7
|
|
- */
|
|
- __phy_write(phydev, 0x11, 0xb90a);
|
|
- __phy_write(phydev, 0x12, 0x6f);
|
|
- __phy_write(phydev, 0x10, 0x8f82);
|
|
-
|
|
- /* RemAckCntLimitCtrl = 1 */
|
|
- __phy_write(phydev, 0x11, 0xfbba);
|
|
- __phy_write(phydev, 0x12, 0xc3);
|
|
- __phy_write(phydev, 0x10, 0x87f8);
|
|
-
|
|
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
|
|
-
|
|
- /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 10 */
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
|
|
- MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
|
|
- BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0xa));
|
|
-
|
|
- /* rg_tr_lpf_cnt_val = 1023 */
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x3ff);
|
|
-}
|
|
-
|
|
-static void mt798x_phy_eee(struct phy_device *phydev)
|
|
-{
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120,
|
|
- MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK |
|
|
- MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK,
|
|
- FIELD_PREP(MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK, 0x0) |
|
|
- FIELD_PREP(MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK, 0x14));
|
|
-
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
|
|
- MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
|
|
- FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
|
|
- 0xff));
|
|
-
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_TESTMUX_ADC_CTRL,
|
|
- MTK_PHY_RG_TXEN_DIG_MASK);
|
|
-
|
|
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_DEV1E_REG19b, MTK_PHY_BYPASS_DSP_LPI_READY);
|
|
-
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_DEV1E_REG234, MTK_PHY_TR_LP_IIR_EEE_EN);
|
|
-
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG238,
|
|
- MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK |
|
|
- MTK_PHY_LPI_SLV_SEND_TX_EN,
|
|
- FIELD_PREP(MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK, 0x120));
|
|
-
|
|
- /* Keep MTK_PHY_LPI_SEND_LOC_TIMER as 375 */
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239,
|
|
- MTK_PHY_LPI_TXPCS_LOC_RCV);
|
|
-
|
|
- /* This also fixes some IoT issues, such as CH340 */
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2C7,
|
|
- MTK_PHY_MAX_GAIN_MASK | MTK_PHY_MIN_GAIN_MASK,
|
|
- FIELD_PREP(MTK_PHY_MAX_GAIN_MASK, 0x8) |
|
|
- FIELD_PREP(MTK_PHY_MIN_GAIN_MASK, 0x13));
|
|
-
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2D1,
|
|
- MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
|
|
- FIELD_PREP(MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
|
|
- 0x33) |
|
|
- MTK_PHY_LPI_SKIP_SD_SLV_TR | MTK_PHY_LPI_TR_READY |
|
|
- MTK_PHY_LPI_VCO_EEE_STG0_EN);
|
|
-
|
|
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG323,
|
|
- MTK_PHY_EEE_WAKE_MAS_INT_DC |
|
|
- MTK_PHY_EEE_WAKE_SLV_INT_DC);
|
|
-
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG324,
|
|
- MTK_PHY_SMI_DETCNT_MAX_MASK,
|
|
- FIELD_PREP(MTK_PHY_SMI_DETCNT_MAX_MASK, 0x3f) |
|
|
- MTK_PHY_SMI_DET_MAX_EN);
|
|
-
|
|
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG326,
|
|
- MTK_PHY_LPI_MODE_SD_ON | MTK_PHY_RESET_RANDUPD_CNT |
|
|
- MTK_PHY_TREC_UPDATE_ENAB_CLR |
|
|
- MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF |
|
|
- MTK_PHY_TR_READY_SKIP_AFE_WAKEUP);
|
|
-
|
|
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
|
|
- /* Regsigdet_sel_1000 = 0 */
|
|
- __phy_write(phydev, 0x11, 0xb);
|
|
- __phy_write(phydev, 0x12, 0x0);
|
|
- __phy_write(phydev, 0x10, 0x9690);
|
|
-
|
|
- /* REG_EEE_st2TrKf1000 = 2 */
|
|
- __phy_write(phydev, 0x11, 0x114f);
|
|
- __phy_write(phydev, 0x12, 0x2);
|
|
- __phy_write(phydev, 0x10, 0x969a);
|
|
-
|
|
- /* RegEEE_slv_wake_tr_timer_tar = 6, RegEEE_slv_remtx_timer_tar = 20 */
|
|
- __phy_write(phydev, 0x11, 0x3028);
|
|
- __phy_write(phydev, 0x12, 0x0);
|
|
- __phy_write(phydev, 0x10, 0x969e);
|
|
-
|
|
- /* RegEEE_slv_wake_int_timer_tar = 8 */
|
|
- __phy_write(phydev, 0x11, 0x5010);
|
|
- __phy_write(phydev, 0x12, 0x0);
|
|
- __phy_write(phydev, 0x10, 0x96a0);
|
|
-
|
|
- /* RegEEE_trfreeze_timer2 = 586 */
|
|
- __phy_write(phydev, 0x11, 0x24a);
|
|
- __phy_write(phydev, 0x12, 0x0);
|
|
- __phy_write(phydev, 0x10, 0x96a8);
|
|
-
|
|
- /* RegEEE100Stg1_tar = 16 */
|
|
- __phy_write(phydev, 0x11, 0x3210);
|
|
- __phy_write(phydev, 0x12, 0x0);
|
|
- __phy_write(phydev, 0x10, 0x96b8);
|
|
-
|
|
- /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 0 */
|
|
- __phy_write(phydev, 0x11, 0x1463);
|
|
- __phy_write(phydev, 0x12, 0x0);
|
|
- __phy_write(phydev, 0x10, 0x96ca);
|
|
-
|
|
- /* DfeTailEnableVgaThresh1000 = 27 */
|
|
- __phy_write(phydev, 0x11, 0x36);
|
|
- __phy_write(phydev, 0x12, 0x0);
|
|
- __phy_write(phydev, 0x10, 0x8f80);
|
|
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
|
|
-
|
|
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_3);
|
|
- __phy_modify(phydev, MTK_PHY_LPI_REG_14, MTK_PHY_LPI_WAKE_TIMER_1000_MASK,
|
|
- FIELD_PREP(MTK_PHY_LPI_WAKE_TIMER_1000_MASK, 0x19c));
|
|
-
|
|
- __phy_modify(phydev, MTK_PHY_LPI_REG_1c, MTK_PHY_SMI_DET_ON_THRESH_MASK,
|
|
- FIELD_PREP(MTK_PHY_SMI_DET_ON_THRESH_MASK, 0xc));
|
|
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
|
|
-
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1,
|
|
- MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
|
|
- MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
|
|
- FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, 0xff));
|
|
-}
|
|
-
|
|
-static int cal_sw(struct phy_device *phydev, enum CAL_ITEM cal_item,
|
|
- u8 start_pair, u8 end_pair)
|
|
-{
|
|
- u8 pair_n;
|
|
- int ret;
|
|
-
|
|
- for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
|
|
- /* TX_OFFSET & TX_AMP have no SW calibration. */
|
|
- switch (cal_item) {
|
|
- case TX_VCM:
|
|
- ret = tx_vcm_cal_sw(phydev, pair_n);
|
|
- break;
|
|
- default:
|
|
- return -EINVAL;
|
|
- }
|
|
- if (ret)
|
|
- return ret;
|
|
- }
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int cal_efuse(struct phy_device *phydev, enum CAL_ITEM cal_item,
|
|
- u8 start_pair, u8 end_pair, u32 *buf)
|
|
-{
|
|
- u8 pair_n;
|
|
- int ret;
|
|
-
|
|
- for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
|
|
- /* TX_VCM has no efuse calibration. */
|
|
- switch (cal_item) {
|
|
- case REXT:
|
|
- ret = rext_cal_efuse(phydev, buf);
|
|
- break;
|
|
- case TX_OFFSET:
|
|
- ret = tx_offset_cal_efuse(phydev, buf);
|
|
- break;
|
|
- case TX_AMP:
|
|
- ret = tx_amp_cal_efuse(phydev, buf);
|
|
- break;
|
|
- case TX_R50:
|
|
- ret = tx_r50_cal_efuse(phydev, buf, pair_n);
|
|
- break;
|
|
- default:
|
|
- return -EINVAL;
|
|
- }
|
|
- if (ret)
|
|
- return ret;
|
|
- }
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int start_cal(struct phy_device *phydev, enum CAL_ITEM cal_item,
|
|
- enum CAL_MODE cal_mode, u8 start_pair,
|
|
- u8 end_pair, u32 *buf)
|
|
-{
|
|
- int ret;
|
|
-
|
|
- switch (cal_mode) {
|
|
- case EFUSE_M:
|
|
- ret = cal_efuse(phydev, cal_item, start_pair,
|
|
- end_pair, buf);
|
|
- break;
|
|
- case SW_M:
|
|
- ret = cal_sw(phydev, cal_item, start_pair, end_pair);
|
|
- break;
|
|
- default:
|
|
- return -EINVAL;
|
|
- }
|
|
-
|
|
- if (ret) {
|
|
- phydev_err(phydev, "cal %d failed\n", cal_item);
|
|
- return -EIO;
|
|
- }
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int mt798x_phy_calibration(struct phy_device *phydev)
|
|
-{
|
|
- int ret = 0;
|
|
- u32 *buf;
|
|
- size_t len;
|
|
- struct nvmem_cell *cell;
|
|
-
|
|
- cell = nvmem_cell_get(&phydev->mdio.dev, "phy-cal-data");
|
|
- if (IS_ERR(cell)) {
|
|
- if (PTR_ERR(cell) == -EPROBE_DEFER)
|
|
- return PTR_ERR(cell);
|
|
- return 0;
|
|
- }
|
|
-
|
|
- buf = (u32 *)nvmem_cell_read(cell, &len);
|
|
- if (IS_ERR(buf))
|
|
- return PTR_ERR(buf);
|
|
- nvmem_cell_put(cell);
|
|
-
|
|
- if (!buf[0] || !buf[1] || !buf[2] || !buf[3] || len < 4 * sizeof(u32)) {
|
|
- phydev_err(phydev, "invalid efuse data\n");
|
|
- ret = -EINVAL;
|
|
- goto out;
|
|
- }
|
|
-
|
|
- ret = start_cal(phydev, REXT, EFUSE_M, NO_PAIR, NO_PAIR, buf);
|
|
- if (ret)
|
|
- goto out;
|
|
- ret = start_cal(phydev, TX_OFFSET, EFUSE_M, NO_PAIR, NO_PAIR, buf);
|
|
- if (ret)
|
|
- goto out;
|
|
- ret = start_cal(phydev, TX_AMP, EFUSE_M, NO_PAIR, NO_PAIR, buf);
|
|
- if (ret)
|
|
- goto out;
|
|
- ret = start_cal(phydev, TX_R50, EFUSE_M, PAIR_A, PAIR_D, buf);
|
|
- if (ret)
|
|
- goto out;
|
|
- ret = start_cal(phydev, TX_VCM, SW_M, PAIR_A, PAIR_A, buf);
|
|
- if (ret)
|
|
- goto out;
|
|
-
|
|
-out:
|
|
- kfree(buf);
|
|
- return ret;
|
|
-}
|
|
-
|
|
-static int mt798x_phy_config_init(struct phy_device *phydev)
|
|
-{
|
|
- switch (phydev->drv->phy_id) {
|
|
- case MTK_GPHY_ID_MT7981:
|
|
- mt7981_phy_finetune(phydev);
|
|
- break;
|
|
- case MTK_GPHY_ID_MT7988:
|
|
- mt7988_phy_finetune(phydev);
|
|
- break;
|
|
- }
|
|
-
|
|
- mt798x_phy_common_finetune(phydev);
|
|
- mt798x_phy_eee(phydev);
|
|
-
|
|
- return mt798x_phy_calibration(phydev);
|
|
-}
|
|
-
|
|
-static int mt798x_phy_hw_led_on_set(struct phy_device *phydev, u8 index,
|
|
- bool on)
|
|
-{
|
|
- unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
|
|
- struct mtk_socphy_priv *priv = phydev->priv;
|
|
- bool changed;
|
|
-
|
|
- if (on)
|
|
- changed = !test_and_set_bit(bit_on, &priv->led_state);
|
|
- else
|
|
- changed = !!test_and_clear_bit(bit_on, &priv->led_state);
|
|
-
|
|
- changed |= !!test_and_clear_bit(MTK_PHY_LED_STATE_NETDEV +
|
|
- (index ? 16 : 0), &priv->led_state);
|
|
- if (changed)
|
|
- return phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
|
|
- MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
|
|
- MTK_PHY_LED_ON_MASK,
|
|
- on ? MTK_PHY_LED_ON_FORCE_ON : 0);
|
|
- else
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int mt798x_phy_hw_led_blink_set(struct phy_device *phydev, u8 index,
|
|
- bool blinking)
|
|
-{
|
|
- unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
|
|
- struct mtk_socphy_priv *priv = phydev->priv;
|
|
- bool changed;
|
|
-
|
|
- if (blinking)
|
|
- changed = !test_and_set_bit(bit_blink, &priv->led_state);
|
|
- else
|
|
- changed = !!test_and_clear_bit(bit_blink, &priv->led_state);
|
|
-
|
|
- changed |= !!test_bit(MTK_PHY_LED_STATE_NETDEV +
|
|
- (index ? 16 : 0), &priv->led_state);
|
|
- if (changed)
|
|
- return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
|
|
- MTK_PHY_LED1_BLINK_CTRL : MTK_PHY_LED0_BLINK_CTRL,
|
|
- blinking ? MTK_PHY_LED_BLINK_FORCE_BLINK : 0);
|
|
- else
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int mt798x_phy_led_blink_set(struct phy_device *phydev, u8 index,
|
|
- unsigned long *delay_on,
|
|
- unsigned long *delay_off)
|
|
-{
|
|
- bool blinking = false;
|
|
- int err = 0;
|
|
-
|
|
- if (index > 1)
|
|
- return -EINVAL;
|
|
-
|
|
- if (delay_on && delay_off && (*delay_on > 0) && (*delay_off > 0)) {
|
|
- blinking = true;
|
|
- *delay_on = 50;
|
|
- *delay_off = 50;
|
|
- }
|
|
-
|
|
- err = mt798x_phy_hw_led_blink_set(phydev, index, blinking);
|
|
- if (err)
|
|
- return err;
|
|
-
|
|
- return mt798x_phy_hw_led_on_set(phydev, index, false);
|
|
-}
|
|
-
|
|
-static int mt798x_phy_led_brightness_set(struct phy_device *phydev,
|
|
- u8 index, enum led_brightness value)
|
|
-{
|
|
- int err;
|
|
-
|
|
- err = mt798x_phy_hw_led_blink_set(phydev, index, false);
|
|
- if (err)
|
|
- return err;
|
|
-
|
|
- return mt798x_phy_hw_led_on_set(phydev, index, (value != LED_OFF));
|
|
-}
|
|
-
|
|
-static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
|
|
- BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
|
|
- BIT(TRIGGER_NETDEV_LINK) |
|
|
- BIT(TRIGGER_NETDEV_LINK_10) |
|
|
- BIT(TRIGGER_NETDEV_LINK_100) |
|
|
- BIT(TRIGGER_NETDEV_LINK_1000) |
|
|
- BIT(TRIGGER_NETDEV_RX) |
|
|
- BIT(TRIGGER_NETDEV_TX));
|
|
-
|
|
-static int mt798x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
|
|
- unsigned long rules)
|
|
-{
|
|
- if (index > 1)
|
|
- return -EINVAL;
|
|
-
|
|
- /* All combinations of the supported triggers are allowed */
|
|
- if (rules & ~supported_triggers)
|
|
- return -EOPNOTSUPP;
|
|
-
|
|
- return 0;
|
|
-};
|
|
-
|
|
-static int mt798x_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
|
|
- unsigned long *rules)
|
|
-{
|
|
- unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
|
|
- unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
|
|
- unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
|
|
- struct mtk_socphy_priv *priv = phydev->priv;
|
|
- int on, blink;
|
|
-
|
|
- if (index > 1)
|
|
- return -EINVAL;
|
|
-
|
|
- on = phy_read_mmd(phydev, MDIO_MMD_VEND2,
|
|
- index ? MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL);
|
|
-
|
|
- if (on < 0)
|
|
- return -EIO;
|
|
-
|
|
- blink = phy_read_mmd(phydev, MDIO_MMD_VEND2,
|
|
- index ? MTK_PHY_LED1_BLINK_CTRL :
|
|
- MTK_PHY_LED0_BLINK_CTRL);
|
|
- if (blink < 0)
|
|
- return -EIO;
|
|
-
|
|
- if ((on & (MTK_PHY_LED_ON_LINK | MTK_PHY_LED_ON_FDX | MTK_PHY_LED_ON_HDX |
|
|
- MTK_PHY_LED_ON_LINKDOWN)) ||
|
|
- (blink & (MTK_PHY_LED_BLINK_RX | MTK_PHY_LED_BLINK_TX)))
|
|
- set_bit(bit_netdev, &priv->led_state);
|
|
- else
|
|
- clear_bit(bit_netdev, &priv->led_state);
|
|
-
|
|
- if (on & MTK_PHY_LED_ON_FORCE_ON)
|
|
- set_bit(bit_on, &priv->led_state);
|
|
- else
|
|
- clear_bit(bit_on, &priv->led_state);
|
|
-
|
|
- if (blink & MTK_PHY_LED_BLINK_FORCE_BLINK)
|
|
- set_bit(bit_blink, &priv->led_state);
|
|
- else
|
|
- clear_bit(bit_blink, &priv->led_state);
|
|
-
|
|
- if (!rules)
|
|
- return 0;
|
|
-
|
|
- if (on & MTK_PHY_LED_ON_LINK)
|
|
- *rules |= BIT(TRIGGER_NETDEV_LINK);
|
|
-
|
|
- if (on & MTK_PHY_LED_ON_LINK10)
|
|
- *rules |= BIT(TRIGGER_NETDEV_LINK_10);
|
|
-
|
|
- if (on & MTK_PHY_LED_ON_LINK100)
|
|
- *rules |= BIT(TRIGGER_NETDEV_LINK_100);
|
|
-
|
|
- if (on & MTK_PHY_LED_ON_LINK1000)
|
|
- *rules |= BIT(TRIGGER_NETDEV_LINK_1000);
|
|
-
|
|
- if (on & MTK_PHY_LED_ON_FDX)
|
|
- *rules |= BIT(TRIGGER_NETDEV_FULL_DUPLEX);
|
|
-
|
|
- if (on & MTK_PHY_LED_ON_HDX)
|
|
- *rules |= BIT(TRIGGER_NETDEV_HALF_DUPLEX);
|
|
-
|
|
- if (blink & MTK_PHY_LED_BLINK_RX)
|
|
- *rules |= BIT(TRIGGER_NETDEV_RX);
|
|
-
|
|
- if (blink & MTK_PHY_LED_BLINK_TX)
|
|
- *rules |= BIT(TRIGGER_NETDEV_TX);
|
|
-
|
|
- return 0;
|
|
-};
|
|
-
|
|
-static int mt798x_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
|
|
- unsigned long rules)
|
|
-{
|
|
- unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
|
|
- struct mtk_socphy_priv *priv = phydev->priv;
|
|
- u16 on = 0, blink = 0;
|
|
- int ret;
|
|
-
|
|
- if (index > 1)
|
|
- return -EINVAL;
|
|
-
|
|
- if (rules & BIT(TRIGGER_NETDEV_FULL_DUPLEX))
|
|
- on |= MTK_PHY_LED_ON_FDX;
|
|
-
|
|
- if (rules & BIT(TRIGGER_NETDEV_HALF_DUPLEX))
|
|
- on |= MTK_PHY_LED_ON_HDX;
|
|
-
|
|
- if (rules & (BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK)))
|
|
- on |= MTK_PHY_LED_ON_LINK10;
|
|
-
|
|
- if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK)))
|
|
- on |= MTK_PHY_LED_ON_LINK100;
|
|
-
|
|
- if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK)))
|
|
- on |= MTK_PHY_LED_ON_LINK1000;
|
|
-
|
|
- if (rules & BIT(TRIGGER_NETDEV_RX)) {
|
|
- blink |= (on & MTK_PHY_LED_ON_LINK) ?
|
|
- (((on & MTK_PHY_LED_ON_LINK10) ? MTK_PHY_LED_BLINK_10RX : 0) |
|
|
- ((on & MTK_PHY_LED_ON_LINK100) ? MTK_PHY_LED_BLINK_100RX : 0) |
|
|
- ((on & MTK_PHY_LED_ON_LINK1000) ? MTK_PHY_LED_BLINK_1000RX : 0)) :
|
|
- MTK_PHY_LED_BLINK_RX;
|
|
- }
|
|
-
|
|
- if (rules & BIT(TRIGGER_NETDEV_TX)) {
|
|
- blink |= (on & MTK_PHY_LED_ON_LINK) ?
|
|
- (((on & MTK_PHY_LED_ON_LINK10) ? MTK_PHY_LED_BLINK_10TX : 0) |
|
|
- ((on & MTK_PHY_LED_ON_LINK100) ? MTK_PHY_LED_BLINK_100TX : 0) |
|
|
- ((on & MTK_PHY_LED_ON_LINK1000) ? MTK_PHY_LED_BLINK_1000TX : 0)) :
|
|
- MTK_PHY_LED_BLINK_TX;
|
|
- }
|
|
-
|
|
- if (blink || on)
|
|
- set_bit(bit_netdev, &priv->led_state);
|
|
- else
|
|
- clear_bit(bit_netdev, &priv->led_state);
|
|
-
|
|
- ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
|
|
- MTK_PHY_LED1_ON_CTRL :
|
|
- MTK_PHY_LED0_ON_CTRL,
|
|
- MTK_PHY_LED_ON_FDX |
|
|
- MTK_PHY_LED_ON_HDX |
|
|
- MTK_PHY_LED_ON_LINK,
|
|
- on);
|
|
-
|
|
- if (ret)
|
|
- return ret;
|
|
-
|
|
- return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
|
|
- MTK_PHY_LED1_BLINK_CTRL :
|
|
- MTK_PHY_LED0_BLINK_CTRL, blink);
|
|
-};
|
|
-
|
|
-static bool mt7988_phy_led_get_polarity(struct phy_device *phydev, int led_num)
|
|
-{
|
|
- struct mtk_socphy_shared *priv = phydev->shared->priv;
|
|
- u32 polarities;
|
|
-
|
|
- if (led_num == 0)
|
|
- polarities = ~(priv->boottrap);
|
|
- else
|
|
- polarities = MTK_PHY_LED1_DEFAULT_POLARITIES;
|
|
-
|
|
- if (polarities & BIT(phydev->mdio.addr))
|
|
- return true;
|
|
-
|
|
- return false;
|
|
-}
|
|
-
|
|
-static int mt7988_phy_fix_leds_polarities(struct phy_device *phydev)
|
|
-{
|
|
- struct pinctrl *pinctrl;
|
|
- int index;
|
|
-
|
|
- /* Setup LED polarity according to bootstrap use of LED pins */
|
|
- for (index = 0; index < 2; ++index)
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
|
|
- MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
|
|
- MTK_PHY_LED_ON_POLARITY,
|
|
- mt7988_phy_led_get_polarity(phydev, index) ?
|
|
- MTK_PHY_LED_ON_POLARITY : 0);
|
|
-
|
|
- /* Only now setup pinctrl to avoid bogus blinking */
|
|
- pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led");
|
|
- if (IS_ERR(pinctrl))
|
|
- dev_err(&phydev->mdio.bus->dev, "Failed to setup PHY LED pinctrl\n");
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int mt7988_phy_probe_shared(struct phy_device *phydev)
|
|
-{
|
|
- struct device_node *np = dev_of_node(&phydev->mdio.bus->dev);
|
|
- struct mtk_socphy_shared *shared = phydev->shared->priv;
|
|
- struct regmap *regmap;
|
|
- u32 reg;
|
|
- int ret;
|
|
-
|
|
- /* The LED0 of the 4 PHYs in MT7988 are wired to SoC pins LED_A, LED_B,
|
|
- * LED_C and LED_D respectively. At the same time those pins are used to
|
|
- * bootstrap configuration of the reference clock source (LED_A),
|
|
- * DRAM DDRx16b x2/x1 (LED_B) and boot device (LED_C, LED_D).
|
|
- * In practise this is done using a LED and a resistor pulling the pin
|
|
- * either to GND or to VIO.
|
|
- * The detected value at boot time is accessible at run-time using the
|
|
- * TPBANK0 register located in the gpio base of the pinctrl, in order
|
|
- * to read it here it needs to be referenced by a phandle called
|
|
- * 'mediatek,pio' in the MDIO bus hosting the PHY.
|
|
- * The 4 bits in TPBANK0 are kept as package shared data and are used to
|
|
- * set LED polarity for each of the LED0.
|
|
- */
|
|
- regmap = syscon_regmap_lookup_by_phandle(np, "mediatek,pio");
|
|
- if (IS_ERR(regmap))
|
|
- return PTR_ERR(regmap);
|
|
-
|
|
- ret = regmap_read(regmap, RG_GPIO_MISC_TPBANK0, ®);
|
|
- if (ret)
|
|
- return ret;
|
|
-
|
|
- shared->boottrap = FIELD_GET(RG_GPIO_MISC_TPBANK0_BOOTMODE, reg);
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static void mt798x_phy_leds_state_init(struct phy_device *phydev)
|
|
-{
|
|
- int i;
|
|
-
|
|
- for (i = 0; i < 2; ++i)
|
|
- mt798x_phy_led_hw_control_get(phydev, i, NULL);
|
|
-}
|
|
-
|
|
-static int mt7988_phy_probe(struct phy_device *phydev)
|
|
-{
|
|
- struct mtk_socphy_shared *shared;
|
|
- struct mtk_socphy_priv *priv;
|
|
- int err;
|
|
-
|
|
- if (phydev->mdio.addr > 3)
|
|
- return -EINVAL;
|
|
-
|
|
- err = devm_phy_package_join(&phydev->mdio.dev, phydev, 0,
|
|
- sizeof(struct mtk_socphy_shared));
|
|
- if (err)
|
|
- return err;
|
|
-
|
|
- if (phy_package_probe_once(phydev)) {
|
|
- err = mt7988_phy_probe_shared(phydev);
|
|
- if (err)
|
|
- return err;
|
|
- }
|
|
-
|
|
- shared = phydev->shared->priv;
|
|
- priv = &shared->priv[phydev->mdio.addr];
|
|
-
|
|
- phydev->priv = priv;
|
|
-
|
|
- mt798x_phy_leds_state_init(phydev);
|
|
-
|
|
- err = mt7988_phy_fix_leds_polarities(phydev);
|
|
- if (err)
|
|
- return err;
|
|
-
|
|
- /* Disable TX power saving at probing to:
|
|
- * 1. Meet common mode compliance test criteria
|
|
- * 2. Make sure that TX-VCM calibration works fine
|
|
- */
|
|
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7,
|
|
- MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8);
|
|
-
|
|
- return mt798x_phy_calibration(phydev);
|
|
-}
|
|
-
|
|
-static int mt7981_phy_probe(struct phy_device *phydev)
|
|
-{
|
|
- struct mtk_socphy_priv *priv;
|
|
-
|
|
- priv = devm_kzalloc(&phydev->mdio.dev, sizeof(struct mtk_socphy_priv),
|
|
- GFP_KERNEL);
|
|
- if (!priv)
|
|
- return -ENOMEM;
|
|
-
|
|
- phydev->priv = priv;
|
|
-
|
|
- mt798x_phy_leds_state_init(phydev);
|
|
-
|
|
- return mt798x_phy_calibration(phydev);
|
|
-}
|
|
-
|
|
-static struct phy_driver mtk_socphy_driver[] = {
|
|
- {
|
|
- PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
|
|
- .name = "MediaTek MT7981 PHY",
|
|
- .config_init = mt798x_phy_config_init,
|
|
- .config_intr = genphy_no_config_intr,
|
|
- .handle_interrupt = genphy_handle_interrupt_no_ack,
|
|
- .probe = mt7981_phy_probe,
|
|
- .suspend = genphy_suspend,
|
|
- .resume = genphy_resume,
|
|
- .read_page = mtk_socphy_read_page,
|
|
- .write_page = mtk_socphy_write_page,
|
|
- .led_blink_set = mt798x_phy_led_blink_set,
|
|
- .led_brightness_set = mt798x_phy_led_brightness_set,
|
|
- .led_hw_is_supported = mt798x_phy_led_hw_is_supported,
|
|
- .led_hw_control_set = mt798x_phy_led_hw_control_set,
|
|
- .led_hw_control_get = mt798x_phy_led_hw_control_get,
|
|
- },
|
|
- {
|
|
- PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
|
|
- .name = "MediaTek MT7988 PHY",
|
|
- .config_init = mt798x_phy_config_init,
|
|
- .config_intr = genphy_no_config_intr,
|
|
- .handle_interrupt = genphy_handle_interrupt_no_ack,
|
|
- .probe = mt7988_phy_probe,
|
|
- .suspend = genphy_suspend,
|
|
- .resume = genphy_resume,
|
|
- .read_page = mtk_socphy_read_page,
|
|
- .write_page = mtk_socphy_write_page,
|
|
- .led_blink_set = mt798x_phy_led_blink_set,
|
|
- .led_brightness_set = mt798x_phy_led_brightness_set,
|
|
- .led_hw_is_supported = mt798x_phy_led_hw_is_supported,
|
|
- .led_hw_control_set = mt798x_phy_led_hw_control_set,
|
|
- .led_hw_control_get = mt798x_phy_led_hw_control_get,
|
|
- },
|
|
-};
|
|
-
|
|
-module_phy_driver(mtk_socphy_driver);
|
|
-
|
|
-static struct mdio_device_id __maybe_unused mtk_socphy_tbl[] = {
|
|
- { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981) },
|
|
- { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988) },
|
|
- { }
|
|
-};
|
|
-
|
|
-MODULE_DESCRIPTION("MediaTek SoC Gigabit Ethernet PHY driver");
|
|
-MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
|
|
-MODULE_AUTHOR("SkyLake Huang <SkyLake.Huang@mediatek.com>");
|
|
-MODULE_LICENSE("GPL");
|
|
-
|
|
-MODULE_DEVICE_TABLE(mdio, mtk_socphy_tbl);
|
|
--- a/drivers/net/phy/mediatek-ge.c
|
|
+++ /dev/null
|
|
@@ -1,148 +0,0 @@
|
|
-// SPDX-License-Identifier: GPL-2.0+
|
|
-#include <linux/of.h>
|
|
-#include <linux/bitfield.h>
|
|
-#include <linux/module.h>
|
|
-#include <linux/phy.h>
|
|
-
|
|
-#define MTK_EXT_PAGE_ACCESS 0x1f
|
|
-#define MTK_PHY_PAGE_STANDARD 0x0000
|
|
-#define MTK_PHY_PAGE_EXTENDED 0x0001
|
|
-#define MTK_PHY_PAGE_EXTENDED_2 0x0002
|
|
-#define MTK_PHY_PAGE_EXTENDED_3 0x0003
|
|
-#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
|
|
-#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
|
|
-
|
|
-static int mtk_gephy_read_page(struct phy_device *phydev)
|
|
-{
|
|
- return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
|
|
-}
|
|
-
|
|
-static int mtk_gephy_write_page(struct phy_device *phydev, int page)
|
|
-{
|
|
- return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
|
|
-}
|
|
-
|
|
-static void mtk_gephy_config_init(struct phy_device *phydev)
|
|
-{
|
|
- /* Disable EEE */
|
|
- phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
|
|
-
|
|
- /* Enable HW auto downshift */
|
|
- phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4));
|
|
-
|
|
- /* Increase SlvDPSready time */
|
|
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
|
|
- __phy_write(phydev, 0x10, 0xafae);
|
|
- __phy_write(phydev, 0x12, 0x2f);
|
|
- __phy_write(phydev, 0x10, 0x8fae);
|
|
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
|
|
-
|
|
- /* Adjust 100_mse_threshold */
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x123, 0xffff);
|
|
-
|
|
- /* Disable mcc */
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xa6, 0x300);
|
|
-}
|
|
-
|
|
-static int mt7530_phy_config_init(struct phy_device *phydev)
|
|
-{
|
|
- mtk_gephy_config_init(phydev);
|
|
-
|
|
- /* Increase post_update_timer */
|
|
- phy_write_paged(phydev, MTK_PHY_PAGE_EXTENDED_3, 0x11, 0x4b);
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int mt7530_led_config_of(struct phy_device *phydev)
|
|
-{
|
|
- struct device_node *np = phydev->mdio.dev.of_node;
|
|
- const __be32 *paddr;
|
|
- int len;
|
|
- int i;
|
|
-
|
|
- paddr = of_get_property(np, "mediatek,led-config", &len);
|
|
- if (!paddr)
|
|
- return 0;
|
|
-
|
|
- if (len < (2 * sizeof(*paddr)))
|
|
- return -EINVAL;
|
|
-
|
|
- len /= sizeof(*paddr);
|
|
-
|
|
- phydev_warn(phydev, "Configure LED registers (num=%d)\n", len);
|
|
- for (i = 0; i < len - 1; i += 2) {
|
|
- u32 reg;
|
|
- u32 val;
|
|
-
|
|
- reg = be32_to_cpup(paddr + i);
|
|
- val = be32_to_cpup(paddr + i + 1);
|
|
-
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND2, reg, val);
|
|
- }
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int mt7531_phy_config_init(struct phy_device *phydev)
|
|
-{
|
|
- mtk_gephy_config_init(phydev);
|
|
-
|
|
- /* PHY link down power saving enable */
|
|
- phy_set_bits(phydev, 0x17, BIT(4));
|
|
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, 0xc6, 0x300);
|
|
-
|
|
- /* Set TX Pair delay selection */
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x13, 0x404);
|
|
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x14, 0x404);
|
|
-
|
|
- /* LED Config*/
|
|
- mt7530_led_config_of(phydev);
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static struct phy_driver mtk_gephy_driver[] = {
|
|
- {
|
|
- PHY_ID_MATCH_EXACT(0x03a29412),
|
|
- .name = "MediaTek MT7530 PHY",
|
|
- .config_init = mt7530_phy_config_init,
|
|
- /* Interrupts are handled by the switch, not the PHY
|
|
- * itself.
|
|
- */
|
|
- .config_intr = genphy_no_config_intr,
|
|
- .handle_interrupt = genphy_handle_interrupt_no_ack,
|
|
- .suspend = genphy_suspend,
|
|
- .resume = genphy_resume,
|
|
- .read_page = mtk_gephy_read_page,
|
|
- .write_page = mtk_gephy_write_page,
|
|
- },
|
|
- {
|
|
- PHY_ID_MATCH_EXACT(0x03a29441),
|
|
- .name = "MediaTek MT7531 PHY",
|
|
- .config_init = mt7531_phy_config_init,
|
|
- /* Interrupts are handled by the switch, not the PHY
|
|
- * itself.
|
|
- */
|
|
- .config_intr = genphy_no_config_intr,
|
|
- .handle_interrupt = genphy_handle_interrupt_no_ack,
|
|
- .suspend = genphy_suspend,
|
|
- .resume = genphy_resume,
|
|
- .read_page = mtk_gephy_read_page,
|
|
- .write_page = mtk_gephy_write_page,
|
|
- },
|
|
-};
|
|
-
|
|
-module_phy_driver(mtk_gephy_driver);
|
|
-
|
|
-static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = {
|
|
- { PHY_ID_MATCH_EXACT(0x03a29441) },
|
|
- { PHY_ID_MATCH_EXACT(0x03a29412) },
|
|
- { }
|
|
-};
|
|
-
|
|
-MODULE_DESCRIPTION("MediaTek Gigabit Ethernet PHY driver");
|
|
-MODULE_AUTHOR("DENG, Qingfang <dqfext@gmail.com>");
|
|
-MODULE_LICENSE("GPL");
|
|
-
|
|
-MODULE_DEVICE_TABLE(mdio, mtk_gephy_tbl);
|
|
--- /dev/null
|
|
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
|
|
@@ -0,0 +1,1555 @@
|
|
+// SPDX-License-Identifier: GPL-2.0+
|
|
+#include <linux/bitfield.h>
|
|
+#include <linux/bitmap.h>
|
|
+#include <linux/mfd/syscon.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/nvmem-consumer.h>
|
|
+#include <linux/pinctrl/consumer.h>
|
|
+#include <linux/phy.h>
|
|
+#include <linux/regmap.h>
|
|
+
|
|
+#define MTK_GPHY_ID_MT7981 0x03a29461
|
|
+#define MTK_GPHY_ID_MT7988 0x03a29481
|
|
+
|
|
+#define MTK_EXT_PAGE_ACCESS 0x1f
|
|
+#define MTK_PHY_PAGE_STANDARD 0x0000
|
|
+#define MTK_PHY_PAGE_EXTENDED_3 0x0003
|
|
+
|
|
+#define MTK_PHY_LPI_REG_14 0x14
|
|
+#define MTK_PHY_LPI_WAKE_TIMER_1000_MASK GENMASK(8, 0)
|
|
+
|
|
+#define MTK_PHY_LPI_REG_1c 0x1c
|
|
+#define MTK_PHY_SMI_DET_ON_THRESH_MASK GENMASK(13, 8)
|
|
+
|
|
+#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
|
|
+#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
|
|
+
|
|
+#define ANALOG_INTERNAL_OPERATION_MAX_US 20
|
|
+#define TXRESERVE_MIN 0
|
|
+#define TXRESERVE_MAX 7
|
|
+
|
|
+#define MTK_PHY_ANARG_RG 0x10
|
|
+#define MTK_PHY_TCLKOFFSET_MASK GENMASK(12, 8)
|
|
+
|
|
+/* Registers on MDIO_MMD_VEND1 */
|
|
+#define MTK_PHY_TXVLD_DA_RG 0x12
|
|
+#define MTK_PHY_DA_TX_I2MPB_A_GBE_MASK GENMASK(15, 10)
|
|
+#define MTK_PHY_DA_TX_I2MPB_A_TBT_MASK GENMASK(5, 0)
|
|
+
|
|
+#define MTK_PHY_TX_I2MPB_TEST_MODE_A2 0x16
|
|
+#define MTK_PHY_DA_TX_I2MPB_A_HBT_MASK GENMASK(15, 10)
|
|
+#define MTK_PHY_DA_TX_I2MPB_A_TST_MASK GENMASK(5, 0)
|
|
+
|
|
+#define MTK_PHY_TX_I2MPB_TEST_MODE_B1 0x17
|
|
+#define MTK_PHY_DA_TX_I2MPB_B_GBE_MASK GENMASK(13, 8)
|
|
+#define MTK_PHY_DA_TX_I2MPB_B_TBT_MASK GENMASK(5, 0)
|
|
+
|
|
+#define MTK_PHY_TX_I2MPB_TEST_MODE_B2 0x18
|
|
+#define MTK_PHY_DA_TX_I2MPB_B_HBT_MASK GENMASK(13, 8)
|
|
+#define MTK_PHY_DA_TX_I2MPB_B_TST_MASK GENMASK(5, 0)
|
|
+
|
|
+#define MTK_PHY_TX_I2MPB_TEST_MODE_C1 0x19
|
|
+#define MTK_PHY_DA_TX_I2MPB_C_GBE_MASK GENMASK(13, 8)
|
|
+#define MTK_PHY_DA_TX_I2MPB_C_TBT_MASK GENMASK(5, 0)
|
|
+
|
|
+#define MTK_PHY_TX_I2MPB_TEST_MODE_C2 0x20
|
|
+#define MTK_PHY_DA_TX_I2MPB_C_HBT_MASK GENMASK(13, 8)
|
|
+#define MTK_PHY_DA_TX_I2MPB_C_TST_MASK GENMASK(5, 0)
|
|
+
|
|
+#define MTK_PHY_TX_I2MPB_TEST_MODE_D1 0x21
|
|
+#define MTK_PHY_DA_TX_I2MPB_D_GBE_MASK GENMASK(13, 8)
|
|
+#define MTK_PHY_DA_TX_I2MPB_D_TBT_MASK GENMASK(5, 0)
|
|
+
|
|
+#define MTK_PHY_TX_I2MPB_TEST_MODE_D2 0x22
|
|
+#define MTK_PHY_DA_TX_I2MPB_D_HBT_MASK GENMASK(13, 8)
|
|
+#define MTK_PHY_DA_TX_I2MPB_D_TST_MASK GENMASK(5, 0)
|
|
+
|
|
+#define MTK_PHY_RXADC_CTRL_RG7 0xc6
|
|
+#define MTK_PHY_DA_AD_BUF_BIAS_LP_MASK GENMASK(9, 8)
|
|
+
|
|
+#define MTK_PHY_RXADC_CTRL_RG9 0xc8
|
|
+#define MTK_PHY_DA_RX_PSBN_TBT_MASK GENMASK(14, 12)
|
|
+#define MTK_PHY_DA_RX_PSBN_HBT_MASK GENMASK(10, 8)
|
|
+#define MTK_PHY_DA_RX_PSBN_GBE_MASK GENMASK(6, 4)
|
|
+#define MTK_PHY_DA_RX_PSBN_LP_MASK GENMASK(2, 0)
|
|
+
|
|
+#define MTK_PHY_LDO_OUTPUT_V 0xd7
|
|
+
|
|
+#define MTK_PHY_RG_ANA_CAL_RG0 0xdb
|
|
+#define MTK_PHY_RG_CAL_CKINV BIT(12)
|
|
+#define MTK_PHY_RG_ANA_CALEN BIT(8)
|
|
+#define MTK_PHY_RG_ZCALEN_A BIT(0)
|
|
+
|
|
+#define MTK_PHY_RG_ANA_CAL_RG1 0xdc
|
|
+#define MTK_PHY_RG_ZCALEN_B BIT(12)
|
|
+#define MTK_PHY_RG_ZCALEN_C BIT(8)
|
|
+#define MTK_PHY_RG_ZCALEN_D BIT(4)
|
|
+#define MTK_PHY_RG_TXVOS_CALEN BIT(0)
|
|
+
|
|
+#define MTK_PHY_RG_ANA_CAL_RG5 0xe0
|
|
+#define MTK_PHY_RG_REXT_TRIM_MASK GENMASK(13, 8)
|
|
+
|
|
+#define MTK_PHY_RG_TX_FILTER 0xfe
|
|
+
|
|
+#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120 0x120
|
|
+#define MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK GENMASK(12, 8)
|
|
+#define MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK GENMASK(4, 0)
|
|
+
|
|
+#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122 0x122
|
|
+#define MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK GENMASK(7, 0)
|
|
+
|
|
+#define MTK_PHY_RG_TESTMUX_ADC_CTRL 0x144
|
|
+#define MTK_PHY_RG_TXEN_DIG_MASK GENMASK(5, 5)
|
|
+
|
|
+#define MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B 0x172
|
|
+#define MTK_PHY_CR_TX_AMP_OFFSET_A_MASK GENMASK(13, 8)
|
|
+#define MTK_PHY_CR_TX_AMP_OFFSET_B_MASK GENMASK(6, 0)
|
|
+
|
|
+#define MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D 0x173
|
|
+#define MTK_PHY_CR_TX_AMP_OFFSET_C_MASK GENMASK(13, 8)
|
|
+#define MTK_PHY_CR_TX_AMP_OFFSET_D_MASK GENMASK(6, 0)
|
|
+
|
|
+#define MTK_PHY_RG_AD_CAL_COMP 0x17a
|
|
+#define MTK_PHY_AD_CAL_COMP_OUT_SHIFT (8)
|
|
+
|
|
+#define MTK_PHY_RG_AD_CAL_CLK 0x17b
|
|
+#define MTK_PHY_DA_CAL_CLK BIT(0)
|
|
+
|
|
+#define MTK_PHY_RG_AD_CALIN 0x17c
|
|
+#define MTK_PHY_DA_CALIN_FLAG BIT(0)
|
|
+
|
|
+#define MTK_PHY_RG_DASN_DAC_IN0_A 0x17d
|
|
+#define MTK_PHY_DASN_DAC_IN0_A_MASK GENMASK(9, 0)
|
|
+
|
|
+#define MTK_PHY_RG_DASN_DAC_IN0_B 0x17e
|
|
+#define MTK_PHY_DASN_DAC_IN0_B_MASK GENMASK(9, 0)
|
|
+
|
|
+#define MTK_PHY_RG_DASN_DAC_IN0_C 0x17f
|
|
+#define MTK_PHY_DASN_DAC_IN0_C_MASK GENMASK(9, 0)
|
|
+
|
|
+#define MTK_PHY_RG_DASN_DAC_IN0_D 0x180
|
|
+#define MTK_PHY_DASN_DAC_IN0_D_MASK GENMASK(9, 0)
|
|
+
|
|
+#define MTK_PHY_RG_DASN_DAC_IN1_A 0x181
|
|
+#define MTK_PHY_DASN_DAC_IN1_A_MASK GENMASK(9, 0)
|
|
+
|
|
+#define MTK_PHY_RG_DASN_DAC_IN1_B 0x182
|
|
+#define MTK_PHY_DASN_DAC_IN1_B_MASK GENMASK(9, 0)
|
|
+
|
|
+#define MTK_PHY_RG_DASN_DAC_IN1_C 0x183
|
|
+#define MTK_PHY_DASN_DAC_IN1_C_MASK GENMASK(9, 0)
|
|
+
|
|
+#define MTK_PHY_RG_DASN_DAC_IN1_D 0x184
|
|
+#define MTK_PHY_DASN_DAC_IN1_D_MASK GENMASK(9, 0)
|
|
+
|
|
+#define MTK_PHY_RG_DEV1E_REG19b 0x19b
|
|
+#define MTK_PHY_BYPASS_DSP_LPI_READY BIT(8)
|
|
+
|
|
+#define MTK_PHY_RG_LP_IIR2_K1_L 0x22a
|
|
+#define MTK_PHY_RG_LP_IIR2_K1_U 0x22b
|
|
+#define MTK_PHY_RG_LP_IIR2_K2_L 0x22c
|
|
+#define MTK_PHY_RG_LP_IIR2_K2_U 0x22d
|
|
+#define MTK_PHY_RG_LP_IIR2_K3_L 0x22e
|
|
+#define MTK_PHY_RG_LP_IIR2_K3_U 0x22f
|
|
+#define MTK_PHY_RG_LP_IIR2_K4_L 0x230
|
|
+#define MTK_PHY_RG_LP_IIR2_K4_U 0x231
|
|
+#define MTK_PHY_RG_LP_IIR2_K5_L 0x232
|
|
+#define MTK_PHY_RG_LP_IIR2_K5_U 0x233
|
|
+
|
|
+#define MTK_PHY_RG_DEV1E_REG234 0x234
|
|
+#define MTK_PHY_TR_OPEN_LOOP_EN_MASK GENMASK(0, 0)
|
|
+#define MTK_PHY_LPF_X_AVERAGE_MASK GENMASK(7, 4)
|
|
+#define MTK_PHY_TR_LP_IIR_EEE_EN BIT(12)
|
|
+
|
|
+#define MTK_PHY_RG_LPF_CNT_VAL 0x235
|
|
+
|
|
+#define MTK_PHY_RG_DEV1E_REG238 0x238
|
|
+#define MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK GENMASK(8, 0)
|
|
+#define MTK_PHY_LPI_SLV_SEND_TX_EN BIT(12)
|
|
+
|
|
+#define MTK_PHY_RG_DEV1E_REG239 0x239
|
|
+#define MTK_PHY_LPI_SEND_LOC_TIMER_MASK GENMASK(8, 0)
|
|
+#define MTK_PHY_LPI_TXPCS_LOC_RCV BIT(12)
|
|
+
|
|
+#define MTK_PHY_RG_DEV1E_REG27C 0x27c
|
|
+#define MTK_PHY_VGASTATE_FFE_THR_ST1_MASK GENMASK(12, 8)
|
|
+#define MTK_PHY_RG_DEV1E_REG27D 0x27d
|
|
+#define MTK_PHY_VGASTATE_FFE_THR_ST2_MASK GENMASK(4, 0)
|
|
+
|
|
+#define MTK_PHY_RG_DEV1E_REG2C7 0x2c7
|
|
+#define MTK_PHY_MAX_GAIN_MASK GENMASK(4, 0)
|
|
+#define MTK_PHY_MIN_GAIN_MASK GENMASK(12, 8)
|
|
+
|
|
+#define MTK_PHY_RG_DEV1E_REG2D1 0x2d1
|
|
+#define MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK GENMASK(7, 0)
|
|
+#define MTK_PHY_LPI_SKIP_SD_SLV_TR BIT(8)
|
|
+#define MTK_PHY_LPI_TR_READY BIT(9)
|
|
+#define MTK_PHY_LPI_VCO_EEE_STG0_EN BIT(10)
|
|
+
|
|
+#define MTK_PHY_RG_DEV1E_REG323 0x323
|
|
+#define MTK_PHY_EEE_WAKE_MAS_INT_DC BIT(0)
|
|
+#define MTK_PHY_EEE_WAKE_SLV_INT_DC BIT(4)
|
|
+
|
|
+#define MTK_PHY_RG_DEV1E_REG324 0x324
|
|
+#define MTK_PHY_SMI_DETCNT_MAX_MASK GENMASK(5, 0)
|
|
+#define MTK_PHY_SMI_DET_MAX_EN BIT(8)
|
|
+
|
|
+#define MTK_PHY_RG_DEV1E_REG326 0x326
|
|
+#define MTK_PHY_LPI_MODE_SD_ON BIT(0)
|
|
+#define MTK_PHY_RESET_RANDUPD_CNT BIT(1)
|
|
+#define MTK_PHY_TREC_UPDATE_ENAB_CLR BIT(2)
|
|
+#define MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF BIT(4)
|
|
+#define MTK_PHY_TR_READY_SKIP_AFE_WAKEUP BIT(5)
|
|
+
|
|
+#define MTK_PHY_LDO_PUMP_EN_PAIRAB 0x502
|
|
+#define MTK_PHY_LDO_PUMP_EN_PAIRCD 0x503
|
|
+
|
|
+#define MTK_PHY_DA_TX_R50_PAIR_A 0x53d
|
|
+#define MTK_PHY_DA_TX_R50_PAIR_B 0x53e
|
|
+#define MTK_PHY_DA_TX_R50_PAIR_C 0x53f
|
|
+#define MTK_PHY_DA_TX_R50_PAIR_D 0x540
|
|
+
|
|
+/* Registers on MDIO_MMD_VEND2 */
|
|
+#define MTK_PHY_LED0_ON_CTRL 0x24
|
|
+#define MTK_PHY_LED1_ON_CTRL 0x26
|
|
+#define MTK_PHY_LED_ON_MASK GENMASK(6, 0)
|
|
+#define MTK_PHY_LED_ON_LINK1000 BIT(0)
|
|
+#define MTK_PHY_LED_ON_LINK100 BIT(1)
|
|
+#define MTK_PHY_LED_ON_LINK10 BIT(2)
|
|
+#define MTK_PHY_LED_ON_LINK (MTK_PHY_LED_ON_LINK10 |\
|
|
+ MTK_PHY_LED_ON_LINK100 |\
|
|
+ MTK_PHY_LED_ON_LINK1000)
|
|
+#define MTK_PHY_LED_ON_LINKDOWN BIT(3)
|
|
+#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */
|
|
+#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */
|
|
+#define MTK_PHY_LED_ON_FORCE_ON BIT(6)
|
|
+#define MTK_PHY_LED_ON_POLARITY BIT(14)
|
|
+#define MTK_PHY_LED_ON_ENABLE BIT(15)
|
|
+
|
|
+#define MTK_PHY_LED0_BLINK_CTRL 0x25
|
|
+#define MTK_PHY_LED1_BLINK_CTRL 0x27
|
|
+#define MTK_PHY_LED_BLINK_1000TX BIT(0)
|
|
+#define MTK_PHY_LED_BLINK_1000RX BIT(1)
|
|
+#define MTK_PHY_LED_BLINK_100TX BIT(2)
|
|
+#define MTK_PHY_LED_BLINK_100RX BIT(3)
|
|
+#define MTK_PHY_LED_BLINK_10TX BIT(4)
|
|
+#define MTK_PHY_LED_BLINK_10RX BIT(5)
|
|
+#define MTK_PHY_LED_BLINK_RX (MTK_PHY_LED_BLINK_10RX |\
|
|
+ MTK_PHY_LED_BLINK_100RX |\
|
|
+ MTK_PHY_LED_BLINK_1000RX)
|
|
+#define MTK_PHY_LED_BLINK_TX (MTK_PHY_LED_BLINK_10TX |\
|
|
+ MTK_PHY_LED_BLINK_100TX |\
|
|
+ MTK_PHY_LED_BLINK_1000TX)
|
|
+#define MTK_PHY_LED_BLINK_COLLISION BIT(6)
|
|
+#define MTK_PHY_LED_BLINK_RX_CRC_ERR BIT(7)
|
|
+#define MTK_PHY_LED_BLINK_RX_IDLE_ERR BIT(8)
|
|
+#define MTK_PHY_LED_BLINK_FORCE_BLINK BIT(9)
|
|
+
|
|
+#define MTK_PHY_LED1_DEFAULT_POLARITIES BIT(1)
|
|
+
|
|
+#define MTK_PHY_RG_BG_RASEL 0x115
|
|
+#define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0)
|
|
+
|
|
+/* 'boottrap' register reflecting the configuration of the 4 PHY LEDs */
|
|
+#define RG_GPIO_MISC_TPBANK0 0x6f0
|
|
+#define RG_GPIO_MISC_TPBANK0_BOOTMODE GENMASK(11, 8)
|
|
+
|
|
+/* These macro privides efuse parsing for internal phy. */
|
|
+#define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0))
|
|
+#define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0))
|
|
+#define EFS_DA_TX_I2MPB_C(x) (((x) >> 12) & GENMASK(5, 0))
|
|
+#define EFS_DA_TX_I2MPB_D(x) (((x) >> 18) & GENMASK(5, 0))
|
|
+#define EFS_DA_TX_AMP_OFFSET_A(x) (((x) >> 24) & GENMASK(5, 0))
|
|
+
|
|
+#define EFS_DA_TX_AMP_OFFSET_B(x) (((x) >> 0) & GENMASK(5, 0))
|
|
+#define EFS_DA_TX_AMP_OFFSET_C(x) (((x) >> 6) & GENMASK(5, 0))
|
|
+#define EFS_DA_TX_AMP_OFFSET_D(x) (((x) >> 12) & GENMASK(5, 0))
|
|
+#define EFS_DA_TX_R50_A(x) (((x) >> 18) & GENMASK(5, 0))
|
|
+#define EFS_DA_TX_R50_B(x) (((x) >> 24) & GENMASK(5, 0))
|
|
+
|
|
+#define EFS_DA_TX_R50_C(x) (((x) >> 0) & GENMASK(5, 0))
|
|
+#define EFS_DA_TX_R50_D(x) (((x) >> 6) & GENMASK(5, 0))
|
|
+
|
|
+#define EFS_RG_BG_RASEL(x) (((x) >> 4) & GENMASK(2, 0))
|
|
+#define EFS_RG_REXT_TRIM(x) (((x) >> 7) & GENMASK(5, 0))
|
|
+
|
|
+enum {
|
|
+ NO_PAIR,
|
|
+ PAIR_A,
|
|
+ PAIR_B,
|
|
+ PAIR_C,
|
|
+ PAIR_D,
|
|
+};
|
|
+
|
|
+enum calibration_mode {
|
|
+ EFUSE_K,
|
|
+ SW_K
|
|
+};
|
|
+
|
|
+enum CAL_ITEM {
|
|
+ REXT,
|
|
+ TX_OFFSET,
|
|
+ TX_AMP,
|
|
+ TX_R50,
|
|
+ TX_VCM
|
|
+};
|
|
+
|
|
+enum CAL_MODE {
|
|
+ EFUSE_M,
|
|
+ SW_M
|
|
+};
|
|
+
|
|
+#define MTK_PHY_LED_STATE_FORCE_ON 0
|
|
+#define MTK_PHY_LED_STATE_FORCE_BLINK 1
|
|
+#define MTK_PHY_LED_STATE_NETDEV 2
|
|
+
|
|
+struct mtk_socphy_priv {
|
|
+ unsigned long led_state;
|
|
+};
|
|
+
|
|
+struct mtk_socphy_shared {
|
|
+ u32 boottrap;
|
|
+ struct mtk_socphy_priv priv[4];
|
|
+};
|
|
+
|
|
+static int mtk_socphy_read_page(struct phy_device *phydev)
|
|
+{
|
|
+ return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
|
|
+}
|
|
+
|
|
+static int mtk_socphy_write_page(struct phy_device *phydev, int page)
|
|
+{
|
|
+ return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
|
|
+}
|
|
+
|
|
+/* One calibration cycle consists of:
|
|
+ * 1.Set DA_CALIN_FLAG high to start calibration. Keep it high
|
|
+ * until AD_CAL_COMP is ready to output calibration result.
|
|
+ * 2.Wait until DA_CAL_CLK is available.
|
|
+ * 3.Fetch AD_CAL_COMP_OUT.
|
|
+ */
|
|
+static int cal_cycle(struct phy_device *phydev, int devad,
|
|
+ u32 regnum, u16 mask, u16 cal_val)
|
|
+{
|
|
+ int reg_val;
|
|
+ int ret;
|
|
+
|
|
+ phy_modify_mmd(phydev, devad, regnum,
|
|
+ mask, cal_val);
|
|
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
|
|
+ MTK_PHY_DA_CALIN_FLAG);
|
|
+
|
|
+ ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_AD_CAL_CLK, reg_val,
|
|
+ reg_val & MTK_PHY_DA_CAL_CLK, 500,
|
|
+ ANALOG_INTERNAL_OPERATION_MAX_US, false);
|
|
+ if (ret) {
|
|
+ phydev_err(phydev, "Calibration cycle timeout\n");
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
|
|
+ MTK_PHY_DA_CALIN_FLAG);
|
|
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >>
|
|
+ MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
|
|
+ phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int rext_fill_result(struct phy_device *phydev, u16 *buf)
|
|
+{
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5,
|
|
+ MTK_PHY_RG_REXT_TRIM_MASK, buf[0] << 8);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_BG_RASEL,
|
|
+ MTK_PHY_RG_BG_RASEL_MASK, buf[1]);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int rext_cal_efuse(struct phy_device *phydev, u32 *buf)
|
|
+{
|
|
+ u16 rext_cal_val[2];
|
|
+
|
|
+ rext_cal_val[0] = EFS_RG_REXT_TRIM(buf[3]);
|
|
+ rext_cal_val[1] = EFS_RG_BG_RASEL(buf[3]);
|
|
+ rext_fill_result(phydev, rext_cal_val);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int tx_offset_fill_result(struct phy_device *phydev, u16 *buf)
|
|
+{
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
|
|
+ MTK_PHY_CR_TX_AMP_OFFSET_A_MASK, buf[0] << 8);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
|
|
+ MTK_PHY_CR_TX_AMP_OFFSET_B_MASK, buf[1]);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
|
|
+ MTK_PHY_CR_TX_AMP_OFFSET_C_MASK, buf[2] << 8);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
|
|
+ MTK_PHY_CR_TX_AMP_OFFSET_D_MASK, buf[3]);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int tx_offset_cal_efuse(struct phy_device *phydev, u32 *buf)
|
|
+{
|
|
+ u16 tx_offset_cal_val[4];
|
|
+
|
|
+ tx_offset_cal_val[0] = EFS_DA_TX_AMP_OFFSET_A(buf[0]);
|
|
+ tx_offset_cal_val[1] = EFS_DA_TX_AMP_OFFSET_B(buf[1]);
|
|
+ tx_offset_cal_val[2] = EFS_DA_TX_AMP_OFFSET_C(buf[1]);
|
|
+ tx_offset_cal_val[3] = EFS_DA_TX_AMP_OFFSET_D(buf[1]);
|
|
+
|
|
+ tx_offset_fill_result(phydev, tx_offset_cal_val);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int tx_amp_fill_result(struct phy_device *phydev, u16 *buf)
|
|
+{
|
|
+ int i;
|
|
+ int bias[16] = {};
|
|
+ const int vals_9461[16] = { 7, 1, 4, 7,
|
|
+ 7, 1, 4, 7,
|
|
+ 7, 1, 4, 7,
|
|
+ 7, 1, 4, 7 };
|
|
+ const int vals_9481[16] = { 10, 6, 6, 10,
|
|
+ 10, 6, 6, 10,
|
|
+ 10, 6, 6, 10,
|
|
+ 10, 6, 6, 10 };
|
|
+ switch (phydev->drv->phy_id) {
|
|
+ case MTK_GPHY_ID_MT7981:
|
|
+ /* We add some calibration to efuse values
|
|
+ * due to board level influence.
|
|
+ * GBE: +7, TBT: +1, HBT: +4, TST: +7
|
|
+ */
|
|
+ memcpy(bias, (const void *)vals_9461, sizeof(bias));
|
|
+ break;
|
|
+ case MTK_GPHY_ID_MT7988:
|
|
+ memcpy(bias, (const void *)vals_9481, sizeof(bias));
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ /* Prevent overflow */
|
|
+ for (i = 0; i < 12; i++) {
|
|
+ if (buf[i >> 2] + bias[i] > 63) {
|
|
+ buf[i >> 2] = 63;
|
|
+ bias[i] = 0;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
|
|
+ MTK_PHY_DA_TX_I2MPB_A_GBE_MASK, (buf[0] + bias[0]) << 10);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
|
|
+ MTK_PHY_DA_TX_I2MPB_A_TBT_MASK, buf[0] + bias[1]);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
|
|
+ MTK_PHY_DA_TX_I2MPB_A_HBT_MASK, (buf[0] + bias[2]) << 10);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
|
|
+ MTK_PHY_DA_TX_I2MPB_A_TST_MASK, buf[0] + bias[3]);
|
|
+
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
|
|
+ MTK_PHY_DA_TX_I2MPB_B_GBE_MASK, (buf[1] + bias[4]) << 8);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
|
|
+ MTK_PHY_DA_TX_I2MPB_B_TBT_MASK, buf[1] + bias[5]);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
|
|
+ MTK_PHY_DA_TX_I2MPB_B_HBT_MASK, (buf[1] + bias[6]) << 8);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
|
|
+ MTK_PHY_DA_TX_I2MPB_B_TST_MASK, buf[1] + bias[7]);
|
|
+
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
|
|
+ MTK_PHY_DA_TX_I2MPB_C_GBE_MASK, (buf[2] + bias[8]) << 8);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
|
|
+ MTK_PHY_DA_TX_I2MPB_C_TBT_MASK, buf[2] + bias[9]);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
|
|
+ MTK_PHY_DA_TX_I2MPB_C_HBT_MASK, (buf[2] + bias[10]) << 8);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
|
|
+ MTK_PHY_DA_TX_I2MPB_C_TST_MASK, buf[2] + bias[11]);
|
|
+
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
|
|
+ MTK_PHY_DA_TX_I2MPB_D_GBE_MASK, (buf[3] + bias[12]) << 8);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
|
|
+ MTK_PHY_DA_TX_I2MPB_D_TBT_MASK, buf[3] + bias[13]);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
|
|
+ MTK_PHY_DA_TX_I2MPB_D_HBT_MASK, (buf[3] + bias[14]) << 8);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
|
|
+ MTK_PHY_DA_TX_I2MPB_D_TST_MASK, buf[3] + bias[15]);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int tx_amp_cal_efuse(struct phy_device *phydev, u32 *buf)
|
|
+{
|
|
+ u16 tx_amp_cal_val[4];
|
|
+
|
|
+ tx_amp_cal_val[0] = EFS_DA_TX_I2MPB_A(buf[0]);
|
|
+ tx_amp_cal_val[1] = EFS_DA_TX_I2MPB_B(buf[0]);
|
|
+ tx_amp_cal_val[2] = EFS_DA_TX_I2MPB_C(buf[0]);
|
|
+ tx_amp_cal_val[3] = EFS_DA_TX_I2MPB_D(buf[0]);
|
|
+ tx_amp_fill_result(phydev, tx_amp_cal_val);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int tx_r50_fill_result(struct phy_device *phydev, u16 tx_r50_cal_val,
|
|
+ u8 txg_calen_x)
|
|
+{
|
|
+ int bias = 0;
|
|
+ u16 reg, val;
|
|
+
|
|
+ if (phydev->drv->phy_id == MTK_GPHY_ID_MT7988)
|
|
+ bias = -1;
|
|
+
|
|
+ val = clamp_val(bias + tx_r50_cal_val, 0, 63);
|
|
+
|
|
+ switch (txg_calen_x) {
|
|
+ case PAIR_A:
|
|
+ reg = MTK_PHY_DA_TX_R50_PAIR_A;
|
|
+ break;
|
|
+ case PAIR_B:
|
|
+ reg = MTK_PHY_DA_TX_R50_PAIR_B;
|
|
+ break;
|
|
+ case PAIR_C:
|
|
+ reg = MTK_PHY_DA_TX_R50_PAIR_C;
|
|
+ break;
|
|
+ case PAIR_D:
|
|
+ reg = MTK_PHY_DA_TX_R50_PAIR_D;
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, val | val << 8);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int tx_r50_cal_efuse(struct phy_device *phydev, u32 *buf,
|
|
+ u8 txg_calen_x)
|
|
+{
|
|
+ u16 tx_r50_cal_val;
|
|
+
|
|
+ switch (txg_calen_x) {
|
|
+ case PAIR_A:
|
|
+ tx_r50_cal_val = EFS_DA_TX_R50_A(buf[1]);
|
|
+ break;
|
|
+ case PAIR_B:
|
|
+ tx_r50_cal_val = EFS_DA_TX_R50_B(buf[1]);
|
|
+ break;
|
|
+ case PAIR_C:
|
|
+ tx_r50_cal_val = EFS_DA_TX_R50_C(buf[2]);
|
|
+ break;
|
|
+ case PAIR_D:
|
|
+ tx_r50_cal_val = EFS_DA_TX_R50_D(buf[2]);
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+ tx_r50_fill_result(phydev, tx_r50_cal_val, txg_calen_x);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int tx_vcm_cal_sw(struct phy_device *phydev, u8 rg_txreserve_x)
|
|
+{
|
|
+ u8 lower_idx, upper_idx, txreserve_val;
|
|
+ u8 lower_ret, upper_ret;
|
|
+ int ret;
|
|
+
|
|
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
|
|
+ MTK_PHY_RG_ANA_CALEN);
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
|
|
+ MTK_PHY_RG_CAL_CKINV);
|
|
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
|
|
+ MTK_PHY_RG_TXVOS_CALEN);
|
|
+
|
|
+ switch (rg_txreserve_x) {
|
|
+ case PAIR_A:
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_DASN_DAC_IN0_A,
|
|
+ MTK_PHY_DASN_DAC_IN0_A_MASK);
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_DASN_DAC_IN1_A,
|
|
+ MTK_PHY_DASN_DAC_IN1_A_MASK);
|
|
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_ANA_CAL_RG0,
|
|
+ MTK_PHY_RG_ZCALEN_A);
|
|
+ break;
|
|
+ case PAIR_B:
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_DASN_DAC_IN0_B,
|
|
+ MTK_PHY_DASN_DAC_IN0_B_MASK);
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_DASN_DAC_IN1_B,
|
|
+ MTK_PHY_DASN_DAC_IN1_B_MASK);
|
|
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_ANA_CAL_RG1,
|
|
+ MTK_PHY_RG_ZCALEN_B);
|
|
+ break;
|
|
+ case PAIR_C:
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_DASN_DAC_IN0_C,
|
|
+ MTK_PHY_DASN_DAC_IN0_C_MASK);
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_DASN_DAC_IN1_C,
|
|
+ MTK_PHY_DASN_DAC_IN1_C_MASK);
|
|
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_ANA_CAL_RG1,
|
|
+ MTK_PHY_RG_ZCALEN_C);
|
|
+ break;
|
|
+ case PAIR_D:
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_DASN_DAC_IN0_D,
|
|
+ MTK_PHY_DASN_DAC_IN0_D_MASK);
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_DASN_DAC_IN1_D,
|
|
+ MTK_PHY_DASN_DAC_IN1_D_MASK);
|
|
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_ANA_CAL_RG1,
|
|
+ MTK_PHY_RG_ZCALEN_D);
|
|
+ break;
|
|
+ default:
|
|
+ ret = -EINVAL;
|
|
+ goto restore;
|
|
+ }
|
|
+
|
|
+ lower_idx = TXRESERVE_MIN;
|
|
+ upper_idx = TXRESERVE_MAX;
|
|
+
|
|
+ phydev_dbg(phydev, "Start TX-VCM SW cal.\n");
|
|
+ while ((upper_idx - lower_idx) > 1) {
|
|
+ txreserve_val = DIV_ROUND_CLOSEST(lower_idx + upper_idx, 2);
|
|
+ ret = cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
|
|
+ MTK_PHY_DA_RX_PSBN_TBT_MASK |
|
|
+ MTK_PHY_DA_RX_PSBN_HBT_MASK |
|
|
+ MTK_PHY_DA_RX_PSBN_GBE_MASK |
|
|
+ MTK_PHY_DA_RX_PSBN_LP_MASK,
|
|
+ txreserve_val << 12 | txreserve_val << 8 |
|
|
+ txreserve_val << 4 | txreserve_val);
|
|
+ if (ret == 1) {
|
|
+ upper_idx = txreserve_val;
|
|
+ upper_ret = ret;
|
|
+ } else if (ret == 0) {
|
|
+ lower_idx = txreserve_val;
|
|
+ lower_ret = ret;
|
|
+ } else {
|
|
+ goto restore;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (lower_idx == TXRESERVE_MIN) {
|
|
+ lower_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RXADC_CTRL_RG9,
|
|
+ MTK_PHY_DA_RX_PSBN_TBT_MASK |
|
|
+ MTK_PHY_DA_RX_PSBN_HBT_MASK |
|
|
+ MTK_PHY_DA_RX_PSBN_GBE_MASK |
|
|
+ MTK_PHY_DA_RX_PSBN_LP_MASK,
|
|
+ lower_idx << 12 | lower_idx << 8 |
|
|
+ lower_idx << 4 | lower_idx);
|
|
+ ret = lower_ret;
|
|
+ } else if (upper_idx == TXRESERVE_MAX) {
|
|
+ upper_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RXADC_CTRL_RG9,
|
|
+ MTK_PHY_DA_RX_PSBN_TBT_MASK |
|
|
+ MTK_PHY_DA_RX_PSBN_HBT_MASK |
|
|
+ MTK_PHY_DA_RX_PSBN_GBE_MASK |
|
|
+ MTK_PHY_DA_RX_PSBN_LP_MASK,
|
|
+ upper_idx << 12 | upper_idx << 8 |
|
|
+ upper_idx << 4 | upper_idx);
|
|
+ ret = upper_ret;
|
|
+ }
|
|
+ if (ret < 0)
|
|
+ goto restore;
|
|
+
|
|
+ /* We calibrate TX-VCM in different logic. Check upper index and then
|
|
+ * lower index. If this calibration is valid, apply lower index's result.
|
|
+ */
|
|
+ ret = upper_ret - lower_ret;
|
|
+ if (ret == 1) {
|
|
+ ret = 0;
|
|
+ /* Make sure we use upper_idx in our calibration system */
|
|
+ cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
|
|
+ MTK_PHY_DA_RX_PSBN_TBT_MASK |
|
|
+ MTK_PHY_DA_RX_PSBN_HBT_MASK |
|
|
+ MTK_PHY_DA_RX_PSBN_GBE_MASK |
|
|
+ MTK_PHY_DA_RX_PSBN_LP_MASK,
|
|
+ upper_idx << 12 | upper_idx << 8 |
|
|
+ upper_idx << 4 | upper_idx);
|
|
+ phydev_dbg(phydev, "TX-VCM SW cal result: 0x%x\n", upper_idx);
|
|
+ } else if (lower_idx == TXRESERVE_MIN && upper_ret == 1 &&
|
|
+ lower_ret == 1) {
|
|
+ ret = 0;
|
|
+ cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
|
|
+ MTK_PHY_DA_RX_PSBN_TBT_MASK |
|
|
+ MTK_PHY_DA_RX_PSBN_HBT_MASK |
|
|
+ MTK_PHY_DA_RX_PSBN_GBE_MASK |
|
|
+ MTK_PHY_DA_RX_PSBN_LP_MASK,
|
|
+ lower_idx << 12 | lower_idx << 8 |
|
|
+ lower_idx << 4 | lower_idx);
|
|
+ phydev_warn(phydev, "TX-VCM SW cal result at low margin 0x%x\n",
|
|
+ lower_idx);
|
|
+ } else if (upper_idx == TXRESERVE_MAX && upper_ret == 0 &&
|
|
+ lower_ret == 0) {
|
|
+ ret = 0;
|
|
+ phydev_warn(phydev, "TX-VCM SW cal result at high margin 0x%x\n",
|
|
+ upper_idx);
|
|
+ } else {
|
|
+ ret = -EINVAL;
|
|
+ }
|
|
+
|
|
+restore:
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
|
|
+ MTK_PHY_RG_ANA_CALEN);
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
|
|
+ MTK_PHY_RG_TXVOS_CALEN);
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
|
|
+ MTK_PHY_RG_ZCALEN_A);
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
|
|
+ MTK_PHY_RG_ZCALEN_B | MTK_PHY_RG_ZCALEN_C |
|
|
+ MTK_PHY_RG_ZCALEN_D);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static void mt798x_phy_common_finetune(struct phy_device *phydev)
|
|
+{
|
|
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
|
|
+ /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */
|
|
+ __phy_write(phydev, 0x11, 0xc71);
|
|
+ __phy_write(phydev, 0x12, 0xc);
|
|
+ __phy_write(phydev, 0x10, 0x8fae);
|
|
+
|
|
+ /* EnabRandUpdTrig = 1 */
|
|
+ __phy_write(phydev, 0x11, 0x2f00);
|
|
+ __phy_write(phydev, 0x12, 0xe);
|
|
+ __phy_write(phydev, 0x10, 0x8fb0);
|
|
+
|
|
+ /* NormMseLoThresh = 85 */
|
|
+ __phy_write(phydev, 0x11, 0x55a0);
|
|
+ __phy_write(phydev, 0x12, 0x0);
|
|
+ __phy_write(phydev, 0x10, 0x83aa);
|
|
+
|
|
+ /* FfeUpdGainForce = 1(Enable), FfeUpdGainForceVal = 4 */
|
|
+ __phy_write(phydev, 0x11, 0x240);
|
|
+ __phy_write(phydev, 0x12, 0x0);
|
|
+ __phy_write(phydev, 0x10, 0x9680);
|
|
+
|
|
+ /* TrFreeze = 0 (mt7988 default) */
|
|
+ __phy_write(phydev, 0x11, 0x0);
|
|
+ __phy_write(phydev, 0x12, 0x0);
|
|
+ __phy_write(phydev, 0x10, 0x9686);
|
|
+
|
|
+ /* SSTrKp100 = 5 */
|
|
+ /* SSTrKf100 = 6 */
|
|
+ /* SSTrKp1000Mas = 5 */
|
|
+ /* SSTrKf1000Mas = 6 */
|
|
+ /* SSTrKp1000Slv = 5 */
|
|
+ /* SSTrKf1000Slv = 6 */
|
|
+ __phy_write(phydev, 0x11, 0xbaef);
|
|
+ __phy_write(phydev, 0x12, 0x2e);
|
|
+ __phy_write(phydev, 0x10, 0x968c);
|
|
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
|
|
+}
|
|
+
|
|
+static void mt7981_phy_finetune(struct phy_device *phydev)
|
|
+{
|
|
+ u16 val[8] = { 0x01ce, 0x01c1,
|
|
+ 0x020f, 0x0202,
|
|
+ 0x03d0, 0x03c0,
|
|
+ 0x0013, 0x0005 };
|
|
+ int i, k;
|
|
+
|
|
+ /* 100M eye finetune:
|
|
+ * Keep middle level of TX MLT3 shapper as default.
|
|
+ * Only change TX MLT3 overshoot level here.
|
|
+ */
|
|
+ for (k = 0, i = 1; i < 12; i++) {
|
|
+ if (i % 3 == 0)
|
|
+ continue;
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]);
|
|
+ }
|
|
+
|
|
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
|
|
+ /* ResetSyncOffset = 6 */
|
|
+ __phy_write(phydev, 0x11, 0x600);
|
|
+ __phy_write(phydev, 0x12, 0x0);
|
|
+ __phy_write(phydev, 0x10, 0x8fc0);
|
|
+
|
|
+ /* VgaDecRate = 1 */
|
|
+ __phy_write(phydev, 0x11, 0x4c2a);
|
|
+ __phy_write(phydev, 0x12, 0x3e);
|
|
+ __phy_write(phydev, 0x10, 0x8fa4);
|
|
+
|
|
+ /* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2,
|
|
+ * MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2
|
|
+ */
|
|
+ __phy_write(phydev, 0x11, 0xd10a);
|
|
+ __phy_write(phydev, 0x12, 0x34);
|
|
+ __phy_write(phydev, 0x10, 0x8f82);
|
|
+
|
|
+ /* VcoSlicerThreshBitsHigh */
|
|
+ __phy_write(phydev, 0x11, 0x5555);
|
|
+ __phy_write(phydev, 0x12, 0x55);
|
|
+ __phy_write(phydev, 0x10, 0x8ec0);
|
|
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
|
|
+
|
|
+ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9 */
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
|
|
+ MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
|
|
+ BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9));
|
|
+
|
|
+ /* rg_tr_lpf_cnt_val = 512 */
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x200);
|
|
+
|
|
+ /* IIR2 related */
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_L, 0x82);
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_U, 0x0);
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_L, 0x103);
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_U, 0x0);
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_L, 0x82);
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_U, 0x0);
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_L, 0xd177);
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_U, 0x3);
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_L, 0x2c82);
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_U, 0xe);
|
|
+
|
|
+ /* FFE peaking */
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27C,
|
|
+ MTK_PHY_VGASTATE_FFE_THR_ST1_MASK, 0x1b << 8);
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27D,
|
|
+ MTK_PHY_VGASTATE_FFE_THR_ST2_MASK, 0x1e);
|
|
+
|
|
+ /* Disable LDO pump */
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRAB, 0x0);
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRCD, 0x0);
|
|
+ /* Adjust LDO output voltage */
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_OUTPUT_V, 0x2222);
|
|
+}
|
|
+
|
|
+static void mt7988_phy_finetune(struct phy_device *phydev)
|
|
+{
|
|
+ u16 val[12] = { 0x0187, 0x01cd, 0x01c8, 0x0182,
|
|
+ 0x020d, 0x0206, 0x0384, 0x03d0,
|
|
+ 0x03c6, 0x030a, 0x0011, 0x0005 };
|
|
+ int i;
|
|
+
|
|
+ /* Set default MLT3 shaper first */
|
|
+ for (i = 0; i < 12; i++)
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[i]);
|
|
+
|
|
+ /* TCT finetune */
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5);
|
|
+
|
|
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
|
|
+ /* ResetSyncOffset = 5 */
|
|
+ __phy_write(phydev, 0x11, 0x500);
|
|
+ __phy_write(phydev, 0x12, 0x0);
|
|
+ __phy_write(phydev, 0x10, 0x8fc0);
|
|
+
|
|
+ /* VgaDecRate is 1 at default on mt7988 */
|
|
+
|
|
+ /* MrvlTrFix100Kp = 6, MrvlTrFix100Kf = 7,
|
|
+ * MrvlTrFix1000Kp = 6, MrvlTrFix1000Kf = 7
|
|
+ */
|
|
+ __phy_write(phydev, 0x11, 0xb90a);
|
|
+ __phy_write(phydev, 0x12, 0x6f);
|
|
+ __phy_write(phydev, 0x10, 0x8f82);
|
|
+
|
|
+ /* RemAckCntLimitCtrl = 1 */
|
|
+ __phy_write(phydev, 0x11, 0xfbba);
|
|
+ __phy_write(phydev, 0x12, 0xc3);
|
|
+ __phy_write(phydev, 0x10, 0x87f8);
|
|
+
|
|
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
|
|
+
|
|
+ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 10 */
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
|
|
+ MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
|
|
+ BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0xa));
|
|
+
|
|
+ /* rg_tr_lpf_cnt_val = 1023 */
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x3ff);
|
|
+}
|
|
+
|
|
+static void mt798x_phy_eee(struct phy_device *phydev)
|
|
+{
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120,
|
|
+ MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK |
|
|
+ MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK,
|
|
+ FIELD_PREP(MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK, 0x0) |
|
|
+ FIELD_PREP(MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK, 0x14));
|
|
+
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
|
|
+ MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
|
|
+ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
|
|
+ 0xff));
|
|
+
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_TESTMUX_ADC_CTRL,
|
|
+ MTK_PHY_RG_TXEN_DIG_MASK);
|
|
+
|
|
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_DEV1E_REG19b, MTK_PHY_BYPASS_DSP_LPI_READY);
|
|
+
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_DEV1E_REG234, MTK_PHY_TR_LP_IIR_EEE_EN);
|
|
+
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG238,
|
|
+ MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK |
|
|
+ MTK_PHY_LPI_SLV_SEND_TX_EN,
|
|
+ FIELD_PREP(MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK, 0x120));
|
|
+
|
|
+ /* Keep MTK_PHY_LPI_SEND_LOC_TIMER as 375 */
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239,
|
|
+ MTK_PHY_LPI_TXPCS_LOC_RCV);
|
|
+
|
|
+ /* This also fixes some IoT issues, such as CH340 */
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2C7,
|
|
+ MTK_PHY_MAX_GAIN_MASK | MTK_PHY_MIN_GAIN_MASK,
|
|
+ FIELD_PREP(MTK_PHY_MAX_GAIN_MASK, 0x8) |
|
|
+ FIELD_PREP(MTK_PHY_MIN_GAIN_MASK, 0x13));
|
|
+
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2D1,
|
|
+ MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
|
|
+ FIELD_PREP(MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
|
|
+ 0x33) |
|
|
+ MTK_PHY_LPI_SKIP_SD_SLV_TR | MTK_PHY_LPI_TR_READY |
|
|
+ MTK_PHY_LPI_VCO_EEE_STG0_EN);
|
|
+
|
|
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG323,
|
|
+ MTK_PHY_EEE_WAKE_MAS_INT_DC |
|
|
+ MTK_PHY_EEE_WAKE_SLV_INT_DC);
|
|
+
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG324,
|
|
+ MTK_PHY_SMI_DETCNT_MAX_MASK,
|
|
+ FIELD_PREP(MTK_PHY_SMI_DETCNT_MAX_MASK, 0x3f) |
|
|
+ MTK_PHY_SMI_DET_MAX_EN);
|
|
+
|
|
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG326,
|
|
+ MTK_PHY_LPI_MODE_SD_ON | MTK_PHY_RESET_RANDUPD_CNT |
|
|
+ MTK_PHY_TREC_UPDATE_ENAB_CLR |
|
|
+ MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF |
|
|
+ MTK_PHY_TR_READY_SKIP_AFE_WAKEUP);
|
|
+
|
|
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
|
|
+ /* Regsigdet_sel_1000 = 0 */
|
|
+ __phy_write(phydev, 0x11, 0xb);
|
|
+ __phy_write(phydev, 0x12, 0x0);
|
|
+ __phy_write(phydev, 0x10, 0x9690);
|
|
+
|
|
+ /* REG_EEE_st2TrKf1000 = 2 */
|
|
+ __phy_write(phydev, 0x11, 0x114f);
|
|
+ __phy_write(phydev, 0x12, 0x2);
|
|
+ __phy_write(phydev, 0x10, 0x969a);
|
|
+
|
|
+ /* RegEEE_slv_wake_tr_timer_tar = 6, RegEEE_slv_remtx_timer_tar = 20 */
|
|
+ __phy_write(phydev, 0x11, 0x3028);
|
|
+ __phy_write(phydev, 0x12, 0x0);
|
|
+ __phy_write(phydev, 0x10, 0x969e);
|
|
+
|
|
+ /* RegEEE_slv_wake_int_timer_tar = 8 */
|
|
+ __phy_write(phydev, 0x11, 0x5010);
|
|
+ __phy_write(phydev, 0x12, 0x0);
|
|
+ __phy_write(phydev, 0x10, 0x96a0);
|
|
+
|
|
+ /* RegEEE_trfreeze_timer2 = 586 */
|
|
+ __phy_write(phydev, 0x11, 0x24a);
|
|
+ __phy_write(phydev, 0x12, 0x0);
|
|
+ __phy_write(phydev, 0x10, 0x96a8);
|
|
+
|
|
+ /* RegEEE100Stg1_tar = 16 */
|
|
+ __phy_write(phydev, 0x11, 0x3210);
|
|
+ __phy_write(phydev, 0x12, 0x0);
|
|
+ __phy_write(phydev, 0x10, 0x96b8);
|
|
+
|
|
+ /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 0 */
|
|
+ __phy_write(phydev, 0x11, 0x1463);
|
|
+ __phy_write(phydev, 0x12, 0x0);
|
|
+ __phy_write(phydev, 0x10, 0x96ca);
|
|
+
|
|
+ /* DfeTailEnableVgaThresh1000 = 27 */
|
|
+ __phy_write(phydev, 0x11, 0x36);
|
|
+ __phy_write(phydev, 0x12, 0x0);
|
|
+ __phy_write(phydev, 0x10, 0x8f80);
|
|
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
|
|
+
|
|
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_3);
|
|
+ __phy_modify(phydev, MTK_PHY_LPI_REG_14, MTK_PHY_LPI_WAKE_TIMER_1000_MASK,
|
|
+ FIELD_PREP(MTK_PHY_LPI_WAKE_TIMER_1000_MASK, 0x19c));
|
|
+
|
|
+ __phy_modify(phydev, MTK_PHY_LPI_REG_1c, MTK_PHY_SMI_DET_ON_THRESH_MASK,
|
|
+ FIELD_PREP(MTK_PHY_SMI_DET_ON_THRESH_MASK, 0xc));
|
|
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
|
|
+
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
|
|
+ MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
|
|
+ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, 0xff));
|
|
+}
|
|
+
|
|
+static int cal_sw(struct phy_device *phydev, enum CAL_ITEM cal_item,
|
|
+ u8 start_pair, u8 end_pair)
|
|
+{
|
|
+ u8 pair_n;
|
|
+ int ret;
|
|
+
|
|
+ for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
|
|
+ /* TX_OFFSET & TX_AMP have no SW calibration. */
|
|
+ switch (cal_item) {
|
|
+ case TX_VCM:
|
|
+ ret = tx_vcm_cal_sw(phydev, pair_n);
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+ if (ret)
|
|
+ return ret;
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int cal_efuse(struct phy_device *phydev, enum CAL_ITEM cal_item,
|
|
+ u8 start_pair, u8 end_pair, u32 *buf)
|
|
+{
|
|
+ u8 pair_n;
|
|
+ int ret;
|
|
+
|
|
+ for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
|
|
+ /* TX_VCM has no efuse calibration. */
|
|
+ switch (cal_item) {
|
|
+ case REXT:
|
|
+ ret = rext_cal_efuse(phydev, buf);
|
|
+ break;
|
|
+ case TX_OFFSET:
|
|
+ ret = tx_offset_cal_efuse(phydev, buf);
|
|
+ break;
|
|
+ case TX_AMP:
|
|
+ ret = tx_amp_cal_efuse(phydev, buf);
|
|
+ break;
|
|
+ case TX_R50:
|
|
+ ret = tx_r50_cal_efuse(phydev, buf, pair_n);
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+ if (ret)
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int start_cal(struct phy_device *phydev, enum CAL_ITEM cal_item,
|
|
+ enum CAL_MODE cal_mode, u8 start_pair,
|
|
+ u8 end_pair, u32 *buf)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ switch (cal_mode) {
|
|
+ case EFUSE_M:
|
|
+ ret = cal_efuse(phydev, cal_item, start_pair,
|
|
+ end_pair, buf);
|
|
+ break;
|
|
+ case SW_M:
|
|
+ ret = cal_sw(phydev, cal_item, start_pair, end_pair);
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ if (ret) {
|
|
+ phydev_err(phydev, "cal %d failed\n", cal_item);
|
|
+ return -EIO;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int mt798x_phy_calibration(struct phy_device *phydev)
|
|
+{
|
|
+ int ret = 0;
|
|
+ u32 *buf;
|
|
+ size_t len;
|
|
+ struct nvmem_cell *cell;
|
|
+
|
|
+ cell = nvmem_cell_get(&phydev->mdio.dev, "phy-cal-data");
|
|
+ if (IS_ERR(cell)) {
|
|
+ if (PTR_ERR(cell) == -EPROBE_DEFER)
|
|
+ return PTR_ERR(cell);
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ buf = (u32 *)nvmem_cell_read(cell, &len);
|
|
+ if (IS_ERR(buf))
|
|
+ return PTR_ERR(buf);
|
|
+ nvmem_cell_put(cell);
|
|
+
|
|
+ if (!buf[0] || !buf[1] || !buf[2] || !buf[3] || len < 4 * sizeof(u32)) {
|
|
+ phydev_err(phydev, "invalid efuse data\n");
|
|
+ ret = -EINVAL;
|
|
+ goto out;
|
|
+ }
|
|
+
|
|
+ ret = start_cal(phydev, REXT, EFUSE_M, NO_PAIR, NO_PAIR, buf);
|
|
+ if (ret)
|
|
+ goto out;
|
|
+ ret = start_cal(phydev, TX_OFFSET, EFUSE_M, NO_PAIR, NO_PAIR, buf);
|
|
+ if (ret)
|
|
+ goto out;
|
|
+ ret = start_cal(phydev, TX_AMP, EFUSE_M, NO_PAIR, NO_PAIR, buf);
|
|
+ if (ret)
|
|
+ goto out;
|
|
+ ret = start_cal(phydev, TX_R50, EFUSE_M, PAIR_A, PAIR_D, buf);
|
|
+ if (ret)
|
|
+ goto out;
|
|
+ ret = start_cal(phydev, TX_VCM, SW_M, PAIR_A, PAIR_A, buf);
|
|
+ if (ret)
|
|
+ goto out;
|
|
+
|
|
+out:
|
|
+ kfree(buf);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int mt798x_phy_config_init(struct phy_device *phydev)
|
|
+{
|
|
+ switch (phydev->drv->phy_id) {
|
|
+ case MTK_GPHY_ID_MT7981:
|
|
+ mt7981_phy_finetune(phydev);
|
|
+ break;
|
|
+ case MTK_GPHY_ID_MT7988:
|
|
+ mt7988_phy_finetune(phydev);
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ mt798x_phy_common_finetune(phydev);
|
|
+ mt798x_phy_eee(phydev);
|
|
+
|
|
+ return mt798x_phy_calibration(phydev);
|
|
+}
|
|
+
|
|
+static int mt798x_phy_hw_led_on_set(struct phy_device *phydev, u8 index,
|
|
+ bool on)
|
|
+{
|
|
+ unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
|
|
+ struct mtk_socphy_priv *priv = phydev->priv;
|
|
+ bool changed;
|
|
+
|
|
+ if (on)
|
|
+ changed = !test_and_set_bit(bit_on, &priv->led_state);
|
|
+ else
|
|
+ changed = !!test_and_clear_bit(bit_on, &priv->led_state);
|
|
+
|
|
+ changed |= !!test_and_clear_bit(MTK_PHY_LED_STATE_NETDEV +
|
|
+ (index ? 16 : 0), &priv->led_state);
|
|
+ if (changed)
|
|
+ return phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
|
|
+ MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
|
|
+ MTK_PHY_LED_ON_MASK,
|
|
+ on ? MTK_PHY_LED_ON_FORCE_ON : 0);
|
|
+ else
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int mt798x_phy_hw_led_blink_set(struct phy_device *phydev, u8 index,
|
|
+ bool blinking)
|
|
+{
|
|
+ unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
|
|
+ struct mtk_socphy_priv *priv = phydev->priv;
|
|
+ bool changed;
|
|
+
|
|
+ if (blinking)
|
|
+ changed = !test_and_set_bit(bit_blink, &priv->led_state);
|
|
+ else
|
|
+ changed = !!test_and_clear_bit(bit_blink, &priv->led_state);
|
|
+
|
|
+ changed |= !!test_bit(MTK_PHY_LED_STATE_NETDEV +
|
|
+ (index ? 16 : 0), &priv->led_state);
|
|
+ if (changed)
|
|
+ return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
|
|
+ MTK_PHY_LED1_BLINK_CTRL : MTK_PHY_LED0_BLINK_CTRL,
|
|
+ blinking ? MTK_PHY_LED_BLINK_FORCE_BLINK : 0);
|
|
+ else
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int mt798x_phy_led_blink_set(struct phy_device *phydev, u8 index,
|
|
+ unsigned long *delay_on,
|
|
+ unsigned long *delay_off)
|
|
+{
|
|
+ bool blinking = false;
|
|
+ int err = 0;
|
|
+
|
|
+ if (index > 1)
|
|
+ return -EINVAL;
|
|
+
|
|
+ if (delay_on && delay_off && (*delay_on > 0) && (*delay_off > 0)) {
|
|
+ blinking = true;
|
|
+ *delay_on = 50;
|
|
+ *delay_off = 50;
|
|
+ }
|
|
+
|
|
+ err = mt798x_phy_hw_led_blink_set(phydev, index, blinking);
|
|
+ if (err)
|
|
+ return err;
|
|
+
|
|
+ return mt798x_phy_hw_led_on_set(phydev, index, false);
|
|
+}
|
|
+
|
|
+static int mt798x_phy_led_brightness_set(struct phy_device *phydev,
|
|
+ u8 index, enum led_brightness value)
|
|
+{
|
|
+ int err;
|
|
+
|
|
+ err = mt798x_phy_hw_led_blink_set(phydev, index, false);
|
|
+ if (err)
|
|
+ return err;
|
|
+
|
|
+ return mt798x_phy_hw_led_on_set(phydev, index, (value != LED_OFF));
|
|
+}
|
|
+
|
|
+static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
|
|
+ BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
|
|
+ BIT(TRIGGER_NETDEV_LINK) |
|
|
+ BIT(TRIGGER_NETDEV_LINK_10) |
|
|
+ BIT(TRIGGER_NETDEV_LINK_100) |
|
|
+ BIT(TRIGGER_NETDEV_LINK_1000) |
|
|
+ BIT(TRIGGER_NETDEV_RX) |
|
|
+ BIT(TRIGGER_NETDEV_TX));
|
|
+
|
|
+static int mt798x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
|
|
+ unsigned long rules)
|
|
+{
|
|
+ if (index > 1)
|
|
+ return -EINVAL;
|
|
+
|
|
+ /* All combinations of the supported triggers are allowed */
|
|
+ if (rules & ~supported_triggers)
|
|
+ return -EOPNOTSUPP;
|
|
+
|
|
+ return 0;
|
|
+};
|
|
+
|
|
+static int mt798x_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
|
|
+ unsigned long *rules)
|
|
+{
|
|
+ unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
|
|
+ unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
|
|
+ unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
|
|
+ struct mtk_socphy_priv *priv = phydev->priv;
|
|
+ int on, blink;
|
|
+
|
|
+ if (index > 1)
|
|
+ return -EINVAL;
|
|
+
|
|
+ on = phy_read_mmd(phydev, MDIO_MMD_VEND2,
|
|
+ index ? MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL);
|
|
+
|
|
+ if (on < 0)
|
|
+ return -EIO;
|
|
+
|
|
+ blink = phy_read_mmd(phydev, MDIO_MMD_VEND2,
|
|
+ index ? MTK_PHY_LED1_BLINK_CTRL :
|
|
+ MTK_PHY_LED0_BLINK_CTRL);
|
|
+ if (blink < 0)
|
|
+ return -EIO;
|
|
+
|
|
+ if ((on & (MTK_PHY_LED_ON_LINK | MTK_PHY_LED_ON_FDX | MTK_PHY_LED_ON_HDX |
|
|
+ MTK_PHY_LED_ON_LINKDOWN)) ||
|
|
+ (blink & (MTK_PHY_LED_BLINK_RX | MTK_PHY_LED_BLINK_TX)))
|
|
+ set_bit(bit_netdev, &priv->led_state);
|
|
+ else
|
|
+ clear_bit(bit_netdev, &priv->led_state);
|
|
+
|
|
+ if (on & MTK_PHY_LED_ON_FORCE_ON)
|
|
+ set_bit(bit_on, &priv->led_state);
|
|
+ else
|
|
+ clear_bit(bit_on, &priv->led_state);
|
|
+
|
|
+ if (blink & MTK_PHY_LED_BLINK_FORCE_BLINK)
|
|
+ set_bit(bit_blink, &priv->led_state);
|
|
+ else
|
|
+ clear_bit(bit_blink, &priv->led_state);
|
|
+
|
|
+ if (!rules)
|
|
+ return 0;
|
|
+
|
|
+ if (on & MTK_PHY_LED_ON_LINK)
|
|
+ *rules |= BIT(TRIGGER_NETDEV_LINK);
|
|
+
|
|
+ if (on & MTK_PHY_LED_ON_LINK10)
|
|
+ *rules |= BIT(TRIGGER_NETDEV_LINK_10);
|
|
+
|
|
+ if (on & MTK_PHY_LED_ON_LINK100)
|
|
+ *rules |= BIT(TRIGGER_NETDEV_LINK_100);
|
|
+
|
|
+ if (on & MTK_PHY_LED_ON_LINK1000)
|
|
+ *rules |= BIT(TRIGGER_NETDEV_LINK_1000);
|
|
+
|
|
+ if (on & MTK_PHY_LED_ON_FDX)
|
|
+ *rules |= BIT(TRIGGER_NETDEV_FULL_DUPLEX);
|
|
+
|
|
+ if (on & MTK_PHY_LED_ON_HDX)
|
|
+ *rules |= BIT(TRIGGER_NETDEV_HALF_DUPLEX);
|
|
+
|
|
+ if (blink & MTK_PHY_LED_BLINK_RX)
|
|
+ *rules |= BIT(TRIGGER_NETDEV_RX);
|
|
+
|
|
+ if (blink & MTK_PHY_LED_BLINK_TX)
|
|
+ *rules |= BIT(TRIGGER_NETDEV_TX);
|
|
+
|
|
+ return 0;
|
|
+};
|
|
+
|
|
+static int mt798x_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
|
|
+ unsigned long rules)
|
|
+{
|
|
+ unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
|
|
+ struct mtk_socphy_priv *priv = phydev->priv;
|
|
+ u16 on = 0, blink = 0;
|
|
+ int ret;
|
|
+
|
|
+ if (index > 1)
|
|
+ return -EINVAL;
|
|
+
|
|
+ if (rules & BIT(TRIGGER_NETDEV_FULL_DUPLEX))
|
|
+ on |= MTK_PHY_LED_ON_FDX;
|
|
+
|
|
+ if (rules & BIT(TRIGGER_NETDEV_HALF_DUPLEX))
|
|
+ on |= MTK_PHY_LED_ON_HDX;
|
|
+
|
|
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK)))
|
|
+ on |= MTK_PHY_LED_ON_LINK10;
|
|
+
|
|
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK)))
|
|
+ on |= MTK_PHY_LED_ON_LINK100;
|
|
+
|
|
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK)))
|
|
+ on |= MTK_PHY_LED_ON_LINK1000;
|
|
+
|
|
+ if (rules & BIT(TRIGGER_NETDEV_RX)) {
|
|
+ blink |= (on & MTK_PHY_LED_ON_LINK) ?
|
|
+ (((on & MTK_PHY_LED_ON_LINK10) ? MTK_PHY_LED_BLINK_10RX : 0) |
|
|
+ ((on & MTK_PHY_LED_ON_LINK100) ? MTK_PHY_LED_BLINK_100RX : 0) |
|
|
+ ((on & MTK_PHY_LED_ON_LINK1000) ? MTK_PHY_LED_BLINK_1000RX : 0)) :
|
|
+ MTK_PHY_LED_BLINK_RX;
|
|
+ }
|
|
+
|
|
+ if (rules & BIT(TRIGGER_NETDEV_TX)) {
|
|
+ blink |= (on & MTK_PHY_LED_ON_LINK) ?
|
|
+ (((on & MTK_PHY_LED_ON_LINK10) ? MTK_PHY_LED_BLINK_10TX : 0) |
|
|
+ ((on & MTK_PHY_LED_ON_LINK100) ? MTK_PHY_LED_BLINK_100TX : 0) |
|
|
+ ((on & MTK_PHY_LED_ON_LINK1000) ? MTK_PHY_LED_BLINK_1000TX : 0)) :
|
|
+ MTK_PHY_LED_BLINK_TX;
|
|
+ }
|
|
+
|
|
+ if (blink || on)
|
|
+ set_bit(bit_netdev, &priv->led_state);
|
|
+ else
|
|
+ clear_bit(bit_netdev, &priv->led_state);
|
|
+
|
|
+ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
|
|
+ MTK_PHY_LED1_ON_CTRL :
|
|
+ MTK_PHY_LED0_ON_CTRL,
|
|
+ MTK_PHY_LED_ON_FDX |
|
|
+ MTK_PHY_LED_ON_HDX |
|
|
+ MTK_PHY_LED_ON_LINK,
|
|
+ on);
|
|
+
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
|
|
+ MTK_PHY_LED1_BLINK_CTRL :
|
|
+ MTK_PHY_LED0_BLINK_CTRL, blink);
|
|
+};
|
|
+
|
|
+static bool mt7988_phy_led_get_polarity(struct phy_device *phydev, int led_num)
|
|
+{
|
|
+ struct mtk_socphy_shared *priv = phydev->shared->priv;
|
|
+ u32 polarities;
|
|
+
|
|
+ if (led_num == 0)
|
|
+ polarities = ~(priv->boottrap);
|
|
+ else
|
|
+ polarities = MTK_PHY_LED1_DEFAULT_POLARITIES;
|
|
+
|
|
+ if (polarities & BIT(phydev->mdio.addr))
|
|
+ return true;
|
|
+
|
|
+ return false;
|
|
+}
|
|
+
|
|
+static int mt7988_phy_fix_leds_polarities(struct phy_device *phydev)
|
|
+{
|
|
+ struct pinctrl *pinctrl;
|
|
+ int index;
|
|
+
|
|
+ /* Setup LED polarity according to bootstrap use of LED pins */
|
|
+ for (index = 0; index < 2; ++index)
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
|
|
+ MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
|
|
+ MTK_PHY_LED_ON_POLARITY,
|
|
+ mt7988_phy_led_get_polarity(phydev, index) ?
|
|
+ MTK_PHY_LED_ON_POLARITY : 0);
|
|
+
|
|
+ /* Only now setup pinctrl to avoid bogus blinking */
|
|
+ pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led");
|
|
+ if (IS_ERR(pinctrl))
|
|
+ dev_err(&phydev->mdio.bus->dev, "Failed to setup PHY LED pinctrl\n");
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int mt7988_phy_probe_shared(struct phy_device *phydev)
|
|
+{
|
|
+ struct device_node *np = dev_of_node(&phydev->mdio.bus->dev);
|
|
+ struct mtk_socphy_shared *shared = phydev->shared->priv;
|
|
+ struct regmap *regmap;
|
|
+ u32 reg;
|
|
+ int ret;
|
|
+
|
|
+ /* The LED0 of the 4 PHYs in MT7988 are wired to SoC pins LED_A, LED_B,
|
|
+ * LED_C and LED_D respectively. At the same time those pins are used to
|
|
+ * bootstrap configuration of the reference clock source (LED_A),
|
|
+ * DRAM DDRx16b x2/x1 (LED_B) and boot device (LED_C, LED_D).
|
|
+ * In practise this is done using a LED and a resistor pulling the pin
|
|
+ * either to GND or to VIO.
|
|
+ * The detected value at boot time is accessible at run-time using the
|
|
+ * TPBANK0 register located in the gpio base of the pinctrl, in order
|
|
+ * to read it here it needs to be referenced by a phandle called
|
|
+ * 'mediatek,pio' in the MDIO bus hosting the PHY.
|
|
+ * The 4 bits in TPBANK0 are kept as package shared data and are used to
|
|
+ * set LED polarity for each of the LED0.
|
|
+ */
|
|
+ regmap = syscon_regmap_lookup_by_phandle(np, "mediatek,pio");
|
|
+ if (IS_ERR(regmap))
|
|
+ return PTR_ERR(regmap);
|
|
+
|
|
+ ret = regmap_read(regmap, RG_GPIO_MISC_TPBANK0, ®);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ shared->boottrap = FIELD_GET(RG_GPIO_MISC_TPBANK0_BOOTMODE, reg);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void mt798x_phy_leds_state_init(struct phy_device *phydev)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ for (i = 0; i < 2; ++i)
|
|
+ mt798x_phy_led_hw_control_get(phydev, i, NULL);
|
|
+}
|
|
+
|
|
+static int mt7988_phy_probe(struct phy_device *phydev)
|
|
+{
|
|
+ struct mtk_socphy_shared *shared;
|
|
+ struct mtk_socphy_priv *priv;
|
|
+ int err;
|
|
+
|
|
+ if (phydev->mdio.addr > 3)
|
|
+ return -EINVAL;
|
|
+
|
|
+ err = devm_phy_package_join(&phydev->mdio.dev, phydev, 0,
|
|
+ sizeof(struct mtk_socphy_shared));
|
|
+ if (err)
|
|
+ return err;
|
|
+
|
|
+ if (phy_package_probe_once(phydev)) {
|
|
+ err = mt7988_phy_probe_shared(phydev);
|
|
+ if (err)
|
|
+ return err;
|
|
+ }
|
|
+
|
|
+ shared = phydev->shared->priv;
|
|
+ priv = &shared->priv[phydev->mdio.addr];
|
|
+
|
|
+ phydev->priv = priv;
|
|
+
|
|
+ mt798x_phy_leds_state_init(phydev);
|
|
+
|
|
+ err = mt7988_phy_fix_leds_polarities(phydev);
|
|
+ if (err)
|
|
+ return err;
|
|
+
|
|
+ /* Disable TX power saving at probing to:
|
|
+ * 1. Meet common mode compliance test criteria
|
|
+ * 2. Make sure that TX-VCM calibration works fine
|
|
+ */
|
|
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7,
|
|
+ MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8);
|
|
+
|
|
+ return mt798x_phy_calibration(phydev);
|
|
+}
|
|
+
|
|
+static int mt7981_phy_probe(struct phy_device *phydev)
|
|
+{
|
|
+ struct mtk_socphy_priv *priv;
|
|
+
|
|
+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(struct mtk_socphy_priv),
|
|
+ GFP_KERNEL);
|
|
+ if (!priv)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ phydev->priv = priv;
|
|
+
|
|
+ mt798x_phy_leds_state_init(phydev);
|
|
+
|
|
+ return mt798x_phy_calibration(phydev);
|
|
+}
|
|
+
|
|
+static struct phy_driver mtk_socphy_driver[] = {
|
|
+ {
|
|
+ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
|
|
+ .name = "MediaTek MT7981 PHY",
|
|
+ .config_init = mt798x_phy_config_init,
|
|
+ .config_intr = genphy_no_config_intr,
|
|
+ .handle_interrupt = genphy_handle_interrupt_no_ack,
|
|
+ .probe = mt7981_phy_probe,
|
|
+ .suspend = genphy_suspend,
|
|
+ .resume = genphy_resume,
|
|
+ .read_page = mtk_socphy_read_page,
|
|
+ .write_page = mtk_socphy_write_page,
|
|
+ .led_blink_set = mt798x_phy_led_blink_set,
|
|
+ .led_brightness_set = mt798x_phy_led_brightness_set,
|
|
+ .led_hw_is_supported = mt798x_phy_led_hw_is_supported,
|
|
+ .led_hw_control_set = mt798x_phy_led_hw_control_set,
|
|
+ .led_hw_control_get = mt798x_phy_led_hw_control_get,
|
|
+ },
|
|
+ {
|
|
+ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
|
|
+ .name = "MediaTek MT7988 PHY",
|
|
+ .config_init = mt798x_phy_config_init,
|
|
+ .config_intr = genphy_no_config_intr,
|
|
+ .handle_interrupt = genphy_handle_interrupt_no_ack,
|
|
+ .probe = mt7988_phy_probe,
|
|
+ .suspend = genphy_suspend,
|
|
+ .resume = genphy_resume,
|
|
+ .read_page = mtk_socphy_read_page,
|
|
+ .write_page = mtk_socphy_write_page,
|
|
+ .led_blink_set = mt798x_phy_led_blink_set,
|
|
+ .led_brightness_set = mt798x_phy_led_brightness_set,
|
|
+ .led_hw_is_supported = mt798x_phy_led_hw_is_supported,
|
|
+ .led_hw_control_set = mt798x_phy_led_hw_control_set,
|
|
+ .led_hw_control_get = mt798x_phy_led_hw_control_get,
|
|
+ },
|
|
+};
|
|
+
|
|
+module_phy_driver(mtk_socphy_driver);
|
|
+
|
|
+static struct mdio_device_id __maybe_unused mtk_socphy_tbl[] = {
|
|
+ { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981) },
|
|
+ { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988) },
|
|
+ { }
|
|
+};
|
|
+
|
|
+MODULE_DESCRIPTION("MediaTek SoC Gigabit Ethernet PHY driver");
|
|
+MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
|
|
+MODULE_AUTHOR("SkyLake Huang <SkyLake.Huang@mediatek.com>");
|
|
+MODULE_LICENSE("GPL");
|
|
+
|
|
+MODULE_DEVICE_TABLE(mdio, mtk_socphy_tbl);
|
|
--- /dev/null
|
|
+++ b/drivers/net/phy/mediatek/mtk-ge.c
|
|
@@ -0,0 +1,148 @@
|
|
+// SPDX-License-Identifier: GPL-2.0+
|
|
+#include <linux/of.h>
|
|
+#include <linux/bitfield.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/phy.h>
|
|
+
|
|
+#define MTK_EXT_PAGE_ACCESS 0x1f
|
|
+#define MTK_PHY_PAGE_STANDARD 0x0000
|
|
+#define MTK_PHY_PAGE_EXTENDED 0x0001
|
|
+#define MTK_PHY_PAGE_EXTENDED_2 0x0002
|
|
+#define MTK_PHY_PAGE_EXTENDED_3 0x0003
|
|
+#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
|
|
+#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
|
|
+
|
|
+static int mtk_gephy_read_page(struct phy_device *phydev)
|
|
+{
|
|
+ return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
|
|
+}
|
|
+
|
|
+static int mtk_gephy_write_page(struct phy_device *phydev, int page)
|
|
+{
|
|
+ return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
|
|
+}
|
|
+
|
|
+static void mtk_gephy_config_init(struct phy_device *phydev)
|
|
+{
|
|
+ /* Disable EEE */
|
|
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
|
|
+
|
|
+ /* Enable HW auto downshift */
|
|
+ phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4));
|
|
+
|
|
+ /* Increase SlvDPSready time */
|
|
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
|
|
+ __phy_write(phydev, 0x10, 0xafae);
|
|
+ __phy_write(phydev, 0x12, 0x2f);
|
|
+ __phy_write(phydev, 0x10, 0x8fae);
|
|
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
|
|
+
|
|
+ /* Adjust 100_mse_threshold */
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x123, 0xffff);
|
|
+
|
|
+ /* Disable mcc */
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xa6, 0x300);
|
|
+}
|
|
+
|
|
+static int mt7530_phy_config_init(struct phy_device *phydev)
|
|
+{
|
|
+ mtk_gephy_config_init(phydev);
|
|
+
|
|
+ /* Increase post_update_timer */
|
|
+ phy_write_paged(phydev, MTK_PHY_PAGE_EXTENDED_3, 0x11, 0x4b);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int mt7530_led_config_of(struct phy_device *phydev)
|
|
+{
|
|
+ struct device_node *np = phydev->mdio.dev.of_node;
|
|
+ const __be32 *paddr;
|
|
+ int len;
|
|
+ int i;
|
|
+
|
|
+ paddr = of_get_property(np, "mediatek,led-config", &len);
|
|
+ if (!paddr)
|
|
+ return 0;
|
|
+
|
|
+ if (len < (2 * sizeof(*paddr)))
|
|
+ return -EINVAL;
|
|
+
|
|
+ len /= sizeof(*paddr);
|
|
+
|
|
+ phydev_warn(phydev, "Configure LED registers (num=%d)\n", len);
|
|
+ for (i = 0; i < len - 1; i += 2) {
|
|
+ u32 reg;
|
|
+ u32 val;
|
|
+
|
|
+ reg = be32_to_cpup(paddr + i);
|
|
+ val = be32_to_cpup(paddr + i + 1);
|
|
+
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND2, reg, val);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int mt7531_phy_config_init(struct phy_device *phydev)
|
|
+{
|
|
+ mtk_gephy_config_init(phydev);
|
|
+
|
|
+ /* PHY link down power saving enable */
|
|
+ phy_set_bits(phydev, 0x17, BIT(4));
|
|
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, 0xc6, 0x300);
|
|
+
|
|
+ /* Set TX Pair delay selection */
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x13, 0x404);
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x14, 0x404);
|
|
+
|
|
+ /* LED Config*/
|
|
+ mt7530_led_config_of(phydev);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct phy_driver mtk_gephy_driver[] = {
|
|
+ {
|
|
+ PHY_ID_MATCH_EXACT(0x03a29412),
|
|
+ .name = "MediaTek MT7530 PHY",
|
|
+ .config_init = mt7530_phy_config_init,
|
|
+ /* Interrupts are handled by the switch, not the PHY
|
|
+ * itself.
|
|
+ */
|
|
+ .config_intr = genphy_no_config_intr,
|
|
+ .handle_interrupt = genphy_handle_interrupt_no_ack,
|
|
+ .suspend = genphy_suspend,
|
|
+ .resume = genphy_resume,
|
|
+ .read_page = mtk_gephy_read_page,
|
|
+ .write_page = mtk_gephy_write_page,
|
|
+ },
|
|
+ {
|
|
+ PHY_ID_MATCH_EXACT(0x03a29441),
|
|
+ .name = "MediaTek MT7531 PHY",
|
|
+ .config_init = mt7531_phy_config_init,
|
|
+ /* Interrupts are handled by the switch, not the PHY
|
|
+ * itself.
|
|
+ */
|
|
+ .config_intr = genphy_no_config_intr,
|
|
+ .handle_interrupt = genphy_handle_interrupt_no_ack,
|
|
+ .suspend = genphy_suspend,
|
|
+ .resume = genphy_resume,
|
|
+ .read_page = mtk_gephy_read_page,
|
|
+ .write_page = mtk_gephy_write_page,
|
|
+ },
|
|
+};
|
|
+
|
|
+module_phy_driver(mtk_gephy_driver);
|
|
+
|
|
+static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = {
|
|
+ { PHY_ID_MATCH_EXACT(0x03a29441) },
|
|
+ { PHY_ID_MATCH_EXACT(0x03a29412) },
|
|
+ { }
|
|
+};
|
|
+
|
|
+MODULE_DESCRIPTION("MediaTek Gigabit Ethernet PHY driver");
|
|
+MODULE_AUTHOR("DENG, Qingfang <dqfext@gmail.com>");
|
|
+MODULE_LICENSE("GPL");
|
|
+
|
|
+MODULE_DEVICE_TABLE(mdio, mtk_gephy_tbl);
|