mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
fbbad9a9a6
The mode on the SGMII SerDes on the QCA9563 is 1000 Base-X by default. This only allows for 1000 Mbit/s links, however when used with an SGMII PHY in 100 Mbit/s link mode, the link remains dead. This strictly has nothing to do with the SerDes calibration, however it is done at the same point in the QCA reference U-Boot which is the blueprint for everything happening here. As the current state is more or less a hack, this should be fine. This fixes the issues outlined above on a TP-Link EAP-225 Outdoor. Reported-by: Tom Herbers <freifunk@tomherbers.de> Tested-by: Tom Herbers <freifunk@tomherbers.de> Signed-off-by: David Bauer <mail@david-bauer.net> |
||
---|---|---|
.. | ||
base-files/etc/hotplug.d/ieee80211 | ||
dts | ||
files | ||
generic | ||
image | ||
mikrotik | ||
nand | ||
patches-5.4 | ||
patches-5.10 | ||
tiny | ||
config-5.4 | ||
config-5.10 | ||
Makefile | ||
modules.mk |