mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
41 lines
1.5 KiB
Diff
41 lines
1.5 KiB
Diff
From 3826d26d2a41f03c82c45465ff4759891c1688c6 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Mon, 19 Feb 2018 17:29:15 +0000
|
|
Subject: [PATCH 222/454] overlays: i2c-gpio: Support for multiple instances
|
|
|
|
Add a 'bus' parameter that, if set to a unique, non-zero
|
|
value, allows multiple i2c-gpio instances to coexist. The chosen
|
|
value doesn't determine the /dev/i2c-* value, but starting with
|
|
1 or 2 and counting upwards seems sensible. N.B. The bus parameter
|
|
has a default value of zero, so one instance doesn't need to specify
|
|
a value.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 3 +++
|
|
arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts | 2 +-
|
|
2 files changed, 4 insertions(+), 1 deletion(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -693,6 +693,9 @@ Params: i2c_gpio_sda GPIO use
|
|
i2c_gpio_delay_us Clock delay in microseconds
|
|
(default "2" = ~100kHz)
|
|
|
|
+ bus Set to a unique, non-zero value if wanting
|
|
+ multiple i2c-gpio busses (default "0")
|
|
+
|
|
|
|
Name: i2c-mux
|
|
Info: Adds support for a number of I2C bus multiplexers on i2c_arm
|
|
--- a/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts
|
|
@@ -38,6 +38,6 @@
|
|
i2c_gpio_sda = <&i2c_gpio>,"gpios:4";
|
|
i2c_gpio_scl = <&i2c_gpio>,"gpios:16";
|
|
i2c_gpio_delay_us = <&i2c_gpio>,"i2c-gpio,delay-us:0";
|
|
+ bus = <&i2c_gpio>, "reg:0";
|
|
};
|
|
};
|
|
-
|