openwrt/target/linux/ramips/dts/mt7621_sercomm_na502s.dts
Shiji Yang fb4cea45ec
ramips: convert MT7603 EEPROM to NVMEM format
This patch converts MT7603 WiFi calibration data to NVMEM format. The
EEPROM size is 0x400.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-09 11:15:52 +02:00

363 lines
6.5 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "sercomm,na502s", "mediatek,mt7621-soc";
model = "SERCOMM NA502S";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "green:power";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
wifi {
label = "green:wifi";
gpios = <&gpio_expander1 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
zwave {
label = "green:zwave";
gpios = <&gpio_expander1 1 GPIO_ACTIVE_LOW>;
};
zigbee {
label = "green:zigbee";
gpios = <&gpio_expander1 2 GPIO_ACTIVE_LOW>;
};
bluetooth {
label = "green:bluetooth";
gpios = <&gpio_expander1 3 GPIO_ACTIVE_LOW>;
};
rf433 {
label = "green:rf433";
gpios = <&gpio_expander1 4 GPIO_ACTIVE_LOW>;
};
service {
label = "green:service";
gpios = <&gpio_expander1 5 GPIO_ACTIVE_LOW>;
};
3g {
label = "green:3g";
gpios = <&gpio_expander1 6 GPIO_ACTIVE_LOW>;
};
voice {
label = "green:voice";
gpios = <&gpio_expander1 7 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
battery_tamper {
label = "battery_tamper";
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_1>;
};
reset {
label = "reset";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
voice {
label = "voice";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
select {
label = "select";
gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
};
sync {
label = "sync";
gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
};
gpio-export {
compatible = "gpio-export";
zwave_reset {
gpio-export,name = "zwave_reset";
gpio-export,output = <1>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
lprf_reset {
gpio-export,name = "lprf_reset";
gpio-export,output = <1>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
charger_detect {
gpio-export,name = "charger_detect";
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
buzzer {
gpio-export,name = "buzzer";
gpio-export,output = <0>;
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
};
3g_hw_shunt_en {
gpio-export,name = "3g_hw_shunt_en";
gpio-export,output = <0>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
3g_sw_on_off {
gpio-export,name = "3g_sw_on_off";
gpio-export,output = <1>;
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
};
3g_wake_up {
gpio-export,name = "3g_wake_up";
gpio-export,output = <0>;
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
};
3g_hw_reset {
gpio-export,name = "3g_hw_reset";
gpio-export,output = <1>;
gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
};
zigbee_reset {
gpio-export,name = "zigbee_reset";
gpio-export,output = <1>;
gpios = <&gpio_expander0 0 GPIO_ACTIVE_LOW>;
};
zigbee_boot {
gpio-export,name = "zigbee_boot";
gpio-export,output = <1>;
gpios = <&gpio_expander0 1 GPIO_ACTIVE_LOW>;
};
2g_sw0 {
gpio-export,name = "2g_sw0";
gpio-export,output = <1>;
gpios = <&gpio_expander0 2 GPIO_ACTIVE_LOW>;
};
2g_sw1 {
gpio-export,name = "2g_sw1";
gpio-export,output = <1>;
gpios = <&gpio_expander0 3 GPIO_ACTIVE_LOW>;
};
fm2018_pwd {
gpio-export,name = "fm2018_pwd";
gpio-export,output = <1>;
gpios = <&gpio_expander0 4 GPIO_ACTIVE_LOW>;
};
fm2018_reset {
gpio-export,name = "fm2018_reset";
gpio-export,output = <1>;
gpios = <&gpio_expander0 5 GPIO_ACTIVE_LOW>;
};
batt_teset {
gpio-export,name = "batt_test";
gpio-export,output = <1>;
gpios = <&gpio_expander0 6 GPIO_ACTIVE_LOW>;
};
mfi_reset {
gpio-export,name = "mfi_reset";
gpio-export,output = <1>;
gpios = <&gpio_expander0 7 GPIO_ACTIVE_LOW>;
};
};
};
&ethernet {
pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
};
&gmac0 {
nvmem-cells = <&macaddr_factory_e000>;
nvmem-cell-names = "mac-address";
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "config";
reg = <0x80000 0x80000>;
read-only;
};
factory: partition@100000 {
compatible = "nvmem-cells";
label = "factory";
reg = <0x100000 0x40000>;
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
macaddr_factory_e000: macaddr@e000 {
reg = <0xe000 0x6>;
};
};
partition@140000 {
label = "kernel1";
reg = <0x140000 0x1400000>;
};
partition@1540000 {
label = "kernel";
reg = <0x1540000 0x400000>;
};
partition@1940000 {
label = "ubi";
reg = <0x1940000 0x1000000>;
};
partition@2940000 {
label = "user_storage";
reg = <0x2940000 0x100000>;
};
partition@2a40000 {
label = "data";
reg = <0x2a40000 0x1000000>;
};
partition@3a40000 {
label = "storage";
reg = <0x3a40000 0x3200000>;
};
partition@6c40000 {
label = "backup";
reg = <0x6c40000 0x1340000>;
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
nvmem-cells = <&macaddr_factory_e000>;
nvmem-cell-names = "mac-address";
mac-address-increment = <1>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_e000>;
nvmem-cell-names = "eeprom", "mac-address";
mac-address-increment = <2>;
ieee80211-freq-limit = <2400000 2500000>;
};
};
&state_default {
gpio {
groups = "jtag", "rgmii2";
function = "gpio";
};
};
&i2c {
status = "okay";
/* This GPIO expander is fake. The kernel fails to initialize the
first expander, but succeeds on the second (real) one */
gpio_expander2: gpio-expander2@22 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
compatible = "semtech,sx1502q";
reg = <0x22>;
gpio-controller;
};
gpio_expander0: gpio-expander0@20 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
compatible = "semtech,sx1502q";
reg = <0x20>;
gpio-controller;
};
gpio_expander1: gpio-expander1@21 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
compatible = "semtech,sx1502q";
reg = <0x21>;
gpio-controller;
};
};
&switch0 {
ports {
port@4 {
status = "okay";
label = "lan";
};
};
};
&uartlite2 {
status = "okay";
};