openwrt/target/linux/ramips/dts/mt7621_hiwifi_hc5962.dts
Shiji Yang fb4cea45ec
ramips: convert MT7603 EEPROM to NVMEM format
This patch converts MT7603 WiFi calibration data to NVMEM format. The
EEPROM size is 0x400.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-09 11:15:52 +02:00

177 lines
2.6 KiB
Plaintext

#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "hiwifi,hc5962", "mediatek,mt7621-soc";
model = "HiWiFi HC5962";
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_status;
led-upgrade = &led_status;
};
chosen {
bootargs = "console=ttyS0,115200";
};
leds {
compatible = "gpio-leds";
led_status: status {
label = "white:status";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
led_system: system {
label = "red:system";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
panic-indicator;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RESTART>;
};
};
ubi-concat {
compatible = "mtd-concat";
devices = <&ubiconcat0 &ubiconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ubi";
reg = <0x0 0x79c0000>;
};
};
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "debug";
reg = <0x80000 0x80000>;
read-only;
};
factory: partition@100000 {
compatible = "nvmem-cells";
label = "factory";
reg = <0x100000 0x40000>;
#address-cells = <1>;
#size-cells = <1>;
read-only;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
};
partition@140000 {
label = "kernel";
reg = <0x140000 0x400000>;
};
ubiconcat0: partition@540000 {
label = "ubiconcat0";
reg = <0x540000 0x1c80000>;
};
partition@21c0000 {
label = "bdinfo";
reg = <0x21c0000 0x80000>;
read-only;
};
ubiconcat1: partition@2240000 {
label = "ubiconcat1";
reg = <0x2240000 0x5d40000>;
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <2400000 2500000>;
};
};
&pcie1 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy4>;
};
&mdio {
ethphy4: ethernet-phy@4 {
reg = <4>;
};
};
&switch0 {
ports {
port@1 {
status = "okay";
label = "lan1";
};
port@2 {
status = "okay";
label = "lan2";
};
port@3 {
status = "okay";
label = "lan3";
};
};
};
&state_default {
gpio {
groups = "uart3", "jtag";
function = "gpio";
};
};