openwrt/target/linux/ramips/dts/mt7621_etisalat_s3.dts
Shiji Yang fb4cea45ec
ramips: convert MT7603 EEPROM to NVMEM format
This patch converts MT7603 WiFi calibration data to NVMEM format. The
EEPROM size is 0x400.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-09 11:15:52 +02:00

250 lines
4.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "etisalat,s3", "mediatek,mt7621-soc";
model = "Etisalat S3";
aliases {
label-mac-device = &gmac0;
led-boot = &led_status_green;
led-failsafe = &led_status_red;
led-running = &led_status_green;
led-upgrade = &led_status_red;
};
leds {
compatible = "gpio-leds";
led-0 {
label = "blue:wan";
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WAN;
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
led_status_green: led-1 {
label = "green:status";
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
led_status_red: led-2 {
label = "red:status";
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
ubi-concat {
compatible = "mtd-concat";
devices = <&ubiconcat0 &ubiconcat1 &ubiconcat2>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ubi";
reg = <0x0 0x4f80000>;
};
};
};
};
&nand {
status = "okay";
partitions {
compatible = "sercomm,sc-partitions", "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
sercomm,scpart-id = <0>;
read-only;
};
partition@100000 {
label = "dynamic partition map";
reg = <0x100000 0x100000>;
sercomm,scpart-id = <1>;
read-only;
};
factory: partition@200000 {
compatible = "nvmem-cells";
label = "Factory";
reg = <0x200000 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
sercomm,scpart-id = <2>;
read-only;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
macaddr_factory_21000: macaddr@21000 {
reg = <0x21000 0x6>;
};
};
partition@300000 {
label = "Boot Flag";
reg = <0x300000 0x100000>;
sercomm,scpart-id = <3>;
};
partition@400000 {
label = "kernel";
reg = <0x400000 0x600000>;
sercomm,scpart-id = <4>;
};
partition@a00000 {
label = "Kernel 2";
reg = <0xa00000 0x600000>;
sercomm,scpart-id = <5>;
read-only;
};
ubiconcat0: partition@1000000 {
label = "File System 1";
reg = <0x1000000 0x2000000>;
sercomm,scpart-id = <6>;
};
partition@3000000 {
label = "File System 2";
reg = <0x3000000 0x2000000>;
sercomm,scpart-id = <7>;
read-only;
};
ubiconcat1: partition@5000000 {
label = "Configuration/log";
reg = <0x5000000 0x1400000>;
sercomm,scpart-id = <8>;
};
ubiconcat2: partition@6400000 {
label = "application tmp buffer (Ftool)";
reg = <0x6400000 0x1b80000>;
sercomm,scpart-id = <9>;
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
nvmem-cells = <&macaddr_factory_21000>;
nvmem-cell-names = "mac-address";
mac-address-increment = <(3)>;
};
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
ieee80211-freq-limit = <2400000 2500000>;
nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_21000>;
nvmem-cell-names = "eeprom", "mac-address";
mac-address-increment = <(2)>;
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_21000>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy0>;
nvmem-cells = <&macaddr_factory_21000>;
nvmem-cell-names = "mac-address";
mac-address-increment = <(11)>;
};
&mdio {
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&switch0 {
ports {
port@1 {
status = "okay";
label = "lan1";
};
port@2 {
status = "okay";
label = "lan2";
};
port@3 {
status = "okay";
label = "lan3";
};
port@4 {
status = "okay";
label = "lan4";
};
};
};
&uartlite3 {
status = "okay";
};
&state_default {
gpio {
groups = "i2c", "jtag";
function = "gpio";
};
};