openwrt/target/linux/generic/hack-4.19/251-sound_kconfig.patch
Hauke Mehrtens 9261e7447e kernel: Make the patches apply on top of 4.19
This makes the patches which were just copied in the previous commit
apply on top of kernel 4.19.

The patches in the backports-4.19 folder were checked if they are really
in kernel 4.19 based on the title and only removed if they were found in
the upstream kernel.

The following additional patches form the pending folder went into
upstream Linux 4.19:
pending-4.19/171-usb-dwc2-Fix-inefficient-copy-of-unaligned-buffers.patch
pending-4.19/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch
pending-4.19/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch
pending-4.19/479-mtd-spi-nor-add-eon-en25qh32.patch
pending-4.19/950-tty-serial-exar-generalize-rs485-setup.patch
pending-4.19/340-MIPS-mm-remove-mips_dma_mapping_error.patch

Bigger changes were introduced to the m25p80 spi nor driver, as far as I
saw it in the new code, it now has the functionality provided in this
patch:
pending-4.19/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch

Part of this patch went upstream independent of OpenWrt:
hack-4.19/220-gc_sections.patch
This patch was reworked to match the changes done upstream.

The MIPS DMA API changed a lot, this patch was rewritten to match the
new DMA handling:
pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch

I did bigger manual changes to the following patches and I am not 100% sure if they are all correct:
pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
pending-4.19/411-mtd-partial_eraseblock_write.patch
pending-4.19/600-netfilter_conntrack_flush.patch
pending-4.19/611-netfilter_match_bypass_default_table.patch
pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
hack-4.19/211-host_tools_portability.patch
hack-4.19/221-module_exports.patch
hack-4.19/321-powerpc_crtsavres_prereq.patch
hack-4.19/902-debloat_proc.patch

This is based on patchset from Marko Ratkaj <marko.ratkaj@sartura.hr>

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:48 +01:00

198 lines
3.9 KiB
Diff

From da3c50704f14132f4adf80d48e9a4cd5d46e54c9 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Fri, 7 Jul 2017 17:09:21 +0200
Subject: kconfig: owrt specifc dependencies
Signed-off-by: John Crispin <john@phrozen.org>
---
crypto/Kconfig | 10 +++++-----
drivers/bcma/Kconfig | 1 +
drivers/ssb/Kconfig | 3 ++-
lib/Kconfig | 8 ++++----
net/netfilter/Kconfig | 2 +-
net/wireless/Kconfig | 17 ++++++++++-------
sound/core/Kconfig | 4 ++--
7 files changed, 25 insertions(+), 20 deletions(-)
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -33,7 +33,7 @@ config CRYPTO_FIPS
this is.
config CRYPTO_ALGAPI
- tristate
+ tristate "ALGAPI"
select CRYPTO_ALGAPI2
help
This option provides the API for cryptographic algorithms.
@@ -42,7 +42,7 @@ config CRYPTO_ALGAPI2
tristate
config CRYPTO_AEAD
- tristate
+ tristate "AEAD"
select CRYPTO_AEAD2
select CRYPTO_ALGAPI
@@ -53,7 +53,7 @@ config CRYPTO_AEAD2
select CRYPTO_RNG2
config CRYPTO_BLKCIPHER
- tristate
+ tristate "BLKCIPHER"
select CRYPTO_BLKCIPHER2
select CRYPTO_ALGAPI
@@ -64,7 +64,7 @@ config CRYPTO_BLKCIPHER2
select CRYPTO_WORKQUEUE
config CRYPTO_HASH
- tristate
+ tristate "HASH"
select CRYPTO_HASH2
select CRYPTO_ALGAPI
@@ -73,7 +73,7 @@ config CRYPTO_HASH2
select CRYPTO_ALGAPI2
config CRYPTO_RNG
- tristate
+ tristate "RNG"
select CRYPTO_RNG2
select CRYPTO_ALGAPI
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -16,6 +16,7 @@ if BCMA
# Support for Block-I/O. SELECT this from the driver that needs it.
config BCMA_BLOCKIO
bool
+ default y
config BCMA_HOST_PCI_POSSIBLE
bool
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -28,6 +28,7 @@ config SSB_SPROM
config SSB_BLOCKIO
bool
depends on SSB
+ default y
config SSB_PCIHOST_POSSIBLE
bool
@@ -48,7 +49,7 @@ config SSB_PCIHOST
config SSB_B43_PCI_BRIDGE
bool
depends on SSB_PCIHOST
- default n
+ default y
config SSB_PCMCIAHOST_POSSIBLE
bool
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -377,16 +377,16 @@ config BCH_CONST_T
# Textsearch support is select'ed if needed
#
config TEXTSEARCH
- bool
+ bool "Textsearch support"
config TEXTSEARCH_KMP
- tristate
+ tristate "Textsearch KMP"
config TEXTSEARCH_BM
- tristate
+ tristate "Textsearch BM"
config TEXTSEARCH_FSM
- tristate
+ tristate "Textsearch FSM"
config BTREE
bool
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -10,7 +10,7 @@ config NETFILTER_INGRESS
infrastructure.
config NETFILTER_NETLINK
- tristate
+ tristate "Netfilter NFNETLINK interface"
config NETFILTER_FAMILY_BRIDGE
bool
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -1,5 +1,5 @@
config WIRELESS_EXT
- bool
+ bool "Wireless extensions"
config WEXT_CORE
def_bool y
@@ -11,10 +11,10 @@ config WEXT_PROC
depends on WEXT_CORE
config WEXT_SPY
- bool
+ bool "WEXT_SPY"
config WEXT_PRIV
- bool
+ bool "WEXT_PRIV"
config CFG80211
tristate "cfg80211 - wireless configuration API"
@@ -202,7 +202,7 @@ config CFG80211_WEXT_EXPORT
endif # CFG80211
config LIB80211
- tristate
+ tristate "LIB80211"
default n
help
This options enables a library of common routines used
@@ -211,13 +211,16 @@ config LIB80211
Drivers should select this themselves if needed.
config LIB80211_CRYPT_WEP
- tristate
+ tristate "LIB80211_CRYPT_WEP"
+ select LIB80211
config LIB80211_CRYPT_CCMP
- tristate
+ tristate "LIB80211_CRYPT_CCMP"
+ select LIB80211
config LIB80211_CRYPT_TKIP
- tristate
+ tristate "LIB80211_CRYPT_TKIP"
+ select LIB80211
config LIB80211_DEBUG
bool "lib80211 debugging messages"
--- a/sound/core/Kconfig
+++ b/sound/core/Kconfig
@@ -16,7 +16,7 @@ config SND_DMAENGINE_PCM
tristate
config SND_HWDEP
- tristate
+ tristate "Sound hardware support"
config SND_SEQ_DEVICE
tristate
@@ -26,7 +26,7 @@ config SND_RAWMIDI
select SND_SEQ_DEVICE if SND_SEQUENCER != n
config SND_COMPRESS_OFFLOAD
- tristate
+ tristate "Compression offloading support"
config SND_JACK
bool