openwrt/target/linux/bcm53xx/patches-4.4/170-USB-bcma-support-old-USB-2.0-controller-on-Northstar.patch

From ef54f033c53bf4518f6e16e7ed815acd855e03c5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 10 Aug 2016 11:51:16 +0200
Subject: [PATCH] USB: bcma: support old USB 2.0 controller on Northstar
 devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Currently bcma-hcd driver handles 3 different bcma cores:
1) BCMA_CORE_USB20_HOST (0x819)
2) BCMA_CORE_NS_USB20 (0x504)
3) BCMA_CORE_NS_USB30 (0x505)

The first one was introduced years ago and so far was used on MIPS
devices only. All Northstar (ARM) devices were using other two cores
which allowed easy implementation of separated initialization paths.

It seems however Broadcom decided to reuse this old USB 2.0 controller
on some recently introduced cheaper Northstar BCM53573 SoCs. I noticed
this on Tenda AC9 (based on BCM47189B0 belonging to BCM53573 family).

There is no difference in this old controller core identification
between MIPS and ARM devices: they share the same id and revision. We
need different controller initialization procedure however.
To handle this add a check for architecture and implement required
initialization for ARM case.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 drivers/usb/host/bcma-hcd.c    | 86 ++++++++++++++++++++++++++++++++++++++++--
 include/linux/bcma/bcma_regs.h |  1 +
 2 files changed, 83 insertions(+), 4 deletions(-)

--- a/drivers/usb/host/bcma-hcd.c
+++ b/drivers/usb/host/bcma-hcd.c
@@ -35,6 +35,9 @@ MODULE_AUTHOR("Hauke Mehrtens");
 MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
 MODULE_LICENSE("GPL");
 
+/* See BCMA_CLKCTLST_EXTRESREQ and BCMA_CLKCTLST_EXTRESST */
+#define USB_BCMA_CLKCTLST_USB_CLK_REQ			0x00000100
+
 struct bcma_hcd_device {
 	struct bcma_device *core;
 	struct platform_device *ehci_dev;
@@ -166,6 +169,76 @@ static void bcma_hcd_init_chip_mips(stru
 	}
 }
 
+/**
+ * bcma_hcd_usb20_old_arm_init - Initialize old USB 2.0 controller on ARM
+ *
+ * Old USB 2.0 core is identified as BCMA_CORE_USB20_HOST and was introduced
+ * long before Northstar devices. It seems some cheaper chipsets like BCM53573
+ * still use it.
+ * Initialization of this old core differs between MIPS and ARM.
+ */
+static int bcma_hcd_usb20_old_arm_init(struct bcma_hcd_device *usb_dev)
+{
+	struct bcma_device *core = usb_dev->core;
+	struct device *dev = &core->dev;
+	struct bcma_device *pmu_core;
+
+	usleep_range(10000, 20000);
+	if (core->id.rev < 5)
+		return 0;
+
+	pmu_core = bcma_find_core(core->bus, BCMA_CORE_PMU);
+	if (!pmu_core) {
+		dev_err(dev, "Could not find PMU core\n");
+		return -ENOENT;
+	}
+
+	/* Take USB core out of reset */
+	bcma_awrite32(core, BCMA_IOCTL, BCMA_IOCTL_CLK | BCMA_IOCTL_FGC);
+	usleep_range(100, 200);
+	bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+	usleep_range(100, 200);
+	bcma_awrite32(core, BCMA_RESET_CTL, 0);
+	usleep_range(100, 200);
+	bcma_awrite32(core, BCMA_IOCTL, BCMA_IOCTL_CLK);
+	usleep_range(100, 200);
+
+	/* Enable Misc PLL */
+	bcma_write32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT |
+					  BCMA_CLKCTLST_HQCLKREQ |
+					  USB_BCMA_CLKCTLST_USB_CLK_REQ);
+	usleep_range(100, 200);
+
+	bcma_write32(core, 0x510, 0xc7f85000);
+	bcma_write32(core, 0x510, 0xc7f85003);
+	usleep_range(300, 600);
+
+	/* Program USB PHY PLL parameters */
+	bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_ADDR, 0x6);
+	bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_DATA, 0x005360c1);
+	usleep_range(100, 200);
+	bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_ADDR, 0x7);
+	bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_DATA, 0x0);
+	usleep_range(100, 200);
+	bcma_set32(pmu_core, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
+	usleep_range(100, 200);
+
+	bcma_write32(core, 0x510, 0x7f8d007);
+	udelay(1000);
+
+	/* Take controller out of reset */
+	bcma_write32(core, 0x200, 0x4ff);
+	usleep_range(25, 50);
+	bcma_write32(core, 0x200, 0x6ff);
+	usleep_range(25, 50);
+	bcma_write32(core, 0x200, 0x7ff);
+	usleep_range(25, 50);
+
+	of_platform_default_populate(dev->of_node, NULL, dev);
+
+	return 0;
+}
+
 static void bcma_hcd_init_chip_arm_phy(struct bcma_device *dev)
 {
 	struct bcma_device *arm_core;
@@ -370,19 +443,24 @@ static int bcma_hcd_probe(struct bcma_de
 
 	switch (core->id.id) {
 	case BCMA_CORE_USB20_HOST:
+		if (IS_ENABLED(CONFIG_ARM))
+			err = bcma_hcd_usb20_old_arm_init(usb_dev);
+		else if (IS_ENABLED(CONFIG_MIPS))
+			err = bcma_hcd_usb20_init(usb_dev);
+		else
+			err = -ENOTSUPP;
+		break;
 	case BCMA_CORE_NS_USB20:
 		err = bcma_hcd_usb20_init(usb_dev);
-		if (err)
-			return err;
 		break;
 	case BCMA_CORE_NS_USB30:
 		err = bcma_hcd_usb30_init(usb_dev);
-		if (err)
-			return err;
 		break;
 	default:
 		return -ENODEV;
 	}
+	if (err)
+		return err;
 
 	bcma_set_drvdata(core, usb_dev);
 	return 0;
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
@@ -10,6 +10,7 @@
 #define  BCMA_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
 #define  BCMA_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
 #define  BCMA_CLKCTLST_HWCROFF		0x00000020 /* Force HW clock request off */
+#define  BCMA_CLKCTLST_HQCLKREQ		0x00000040 /* HQ Clock */
 #define  BCMA_CLKCTLST_EXTRESREQ	0x00000700 /* Mask of external resource requests */
 #define  BCMA_CLKCTLST_EXTRESREQ_SHIFT	8
 #define  BCMA_CLKCTLST_HAVEALP		0x00010000 /* ALP available */