mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
f9278337cf
This patch adds support for the TP-Link TL-WR802N Version 2. Specification: - SoC: Qualcomm Atheros QCA9533 (560 MHz, MIPS 24Kc) - RAM: 32 MiB - Storage: 4 MiB of FLash on board - Wireless: Built into QCA9533 (Honey Bee), PHY modes b/g/n - Ethernet: 1x100M (port0) Installation through OEM Web Interface: - Connect to TL-WR802N by Ethernet or Wi-Fi - Go to http://192.168.0.1 (default user is "admin" & password is "admin) - Go to "System Tools -> Firmware Upgrade" - Browse for firmware "*.factory-us.bin" or "*.factory-eu.bin" for eu model - Click upgrade Installation through tftp: Note: T_OUT, T_IN and GND on the board must be connected to USB TTL Serial Configuration 115200 8n1 - Boot the TL-WR802N - When "Autobooting in 1 seconds" appears type "tpl" followed by enter - Connect to the board Ethernet port (IPADDR: 192.168.1.1, ServerIP: 192.168.1.10) - tftpboot 0x80000000 <Firmware Image Name> - Record the result of "printenv bootcmd" - Enter "erase <Result of 'printenv bootcmd'> +0x3c0000" (e.g erase 0x9f020000 +0x3c0000) - Enter "cp.b 0x80000000 <Result of 'printenv bootcmd'> 0x3c0000" (e.g cp.b 0x80000000 0x9f020000 0x3c0000) - Enter "bootm <Result of 'printenv bootcmd'>" (e.g bootm 0x9f020000) Signed-off-by: Thomas Roberts <tom.p.roberts@gmail.com>
97 lines
2.5 KiB
C
97 lines
2.5 KiB
C
/*
|
|
* TP-LINK TL-WR802N v2
|
|
*
|
|
* Copyright (C) 2016 Thomas Roberts <tom.p.roberts@gmail.com <mailto:tom.p.roberts@gmail.com>>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define TL_WR802N_V2_GPIO_LED_SYSTEM 13
|
|
#define TL_WR802N_V2_GPIO_BTN_RESET 11
|
|
|
|
#define TL_WR802N_V2_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define TL_WR802N_V2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR802N_V2_KEYS_POLL_INTERVAL)
|
|
|
|
static const char *tl_wr802n_v2_part_probes[] = {
|
|
"tp-link",
|
|
NULL,
|
|
};
|
|
|
|
static struct flash_platform_data tl_wr802n_v2_flash_data = {
|
|
.part_probes = tl_wr802n_v2_part_probes,
|
|
};
|
|
|
|
static struct gpio_led tl_wr802n_v2_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "tl-wr802n-v2:green:system",
|
|
.gpio = TL_WR802N_V2_GPIO_LED_SYSTEM,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button tl_wr802n_v2_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = TL_WR802N_V2_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = TL_WR802N_V2_GPIO_BTN_RESET,
|
|
.active_low = 0,
|
|
}
|
|
};
|
|
|
|
static void __init tl_ap143_setup(void)
|
|
{
|
|
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
|
|
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
|
u8 tmpmac[ETH_ALEN];
|
|
|
|
ath79_register_m25p80(&tl_wr802n_v2_flash_data);
|
|
|
|
ath79_setup_ar933x_phy4_switch(false, false);
|
|
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
/* LAN */
|
|
ath79_switch_data.phy4_mii_en = 1;
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
ath79_eth0_data.speed = SPEED_100;
|
|
ath79_eth0_data.phy_mask = BIT(4);
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
|
|
ath79_register_eth(0);
|
|
|
|
ath79_init_mac(tmpmac, mac, 0);
|
|
ath79_register_wmac(ee, tmpmac);
|
|
};
|
|
|
|
static void __init tl_wr802n_v2_setup(void)
|
|
{
|
|
tl_ap143_setup();
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr802n_v2_leds_gpio),
|
|
tl_wr802n_v2_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(1, TL_WR802N_V2_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(tl_wr802n_v2_gpio_keys),
|
|
tl_wr802n_v2_gpio_keys);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_TL_WR802N_V2, "TL-WR802N-v2", "TP-LINK TL-WR802N v2",
|
|
tl_wr802n_v2_setup); |