mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 08:21:14 +00:00
5696244ae2
The kernel of both images will no longer fit into the 3072KiB / 3MiB kernel partition: |Image Name: ARM OpenWrt Linux-5.10.100 |Created: Sat Feb 19 00:11:55 2022 |Image Type: ARM Linux Kernel Image (uncompressed) |Data Size: 3147140 Bytes = 3073.38 KiB = 3.00 MiB Disable both targets for now, until a solution is available. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
457 lines
12 KiB
Makefile
457 lines
12 KiB
Makefile
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
|
|
DEVICE_VARS += TPLINK_BOARD_ID
|
|
|
|
define Build/buffalo-rootfs-cksum
|
|
( \
|
|
echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \
|
|
$(STAGING_DIR_HOST)/bin/awk '{s+=$$0}END{printf "%x", 255-s%256}')"; \
|
|
) >> $@
|
|
endef
|
|
|
|
define Build/edimax-header
|
|
$(eval edimax_model=$(word 1,$(1)))
|
|
|
|
$(STAGING_DIR_HOST)/bin/mkedimaximg \
|
|
-b -s CSYS -m $(edimax_model) \
|
|
-f 0x70000 -S 0x1200000 \
|
|
-i $@ -o $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Device/DniImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
NETGEAR_BOARD_ID :=
|
|
NETGEAR_HW_ID :=
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
|
|
append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi | netgear-dni
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
|
|
append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | \
|
|
append-metadata
|
|
endef
|
|
|
|
define Device/TpSafeImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
TPLINK_BOARD_ID :=
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
|
IMAGE/sysupgrade.bin := append-rootfs | \
|
|
tplink-safeloader sysupgrade | append-metadata
|
|
endef
|
|
|
|
define Device/ZyXELImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none | \
|
|
pad-to $$(KERNEL_SIZE)
|
|
KERNEL_NAME := zImage
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | \
|
|
pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel
|
|
IMAGE/sysupgrade.bin/squashfs := append-rootfs | \
|
|
pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | \
|
|
append-metadata
|
|
endef
|
|
|
|
define Device/askey_rt4230w-rev6
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := Askey
|
|
DEVICE_MODEL := RT4230W
|
|
DEVICE_VARIANT := REV6
|
|
SOC := qcom-ipq8065
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
|
KERNEL_IN_UBI := 1
|
|
endef
|
|
TARGET_DEVICES += askey_rt4230w-rev6
|
|
|
|
define Device/asrock_g10
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
SOC := qcom-ipq8064
|
|
DEVICE_VENDOR := ASRock
|
|
DEVICE_MODEL := G10
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 5332k
|
|
DEVICE_PACKAGES := kmod-i2c-gpio ath10k-firmware-qca99x0-ct
|
|
IMAGE/nand-factory.bin := append-ubi | edimax-header RN67
|
|
endef
|
|
TARGET_DEVICES += asrock_g10
|
|
|
|
define Device/buffalo_wxr-2533dhp
|
|
$(call Device/LegacyImage)
|
|
SOC := qcom-ipq8064
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WXR-2533DHP
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \
|
|
sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += buffalo_wxr-2533dhp
|
|
|
|
define Device/compex_wpq864
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Compex
|
|
DEVICE_MODEL := WPQ864
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SOC := qcom-ipq8064
|
|
DEVICE_PACKAGES := kmod-gpio-beeper
|
|
endef
|
|
TARGET_DEVICES += compex_wpq864
|
|
|
|
define Device/edgecore_ecw5410
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Edgecore
|
|
DEVICE_MODEL := ECW5410
|
|
SOC := qcom-ipq8068
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@v2.0-ap160
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct \
|
|
ipq-wifi-edgecore_ecw5410
|
|
endef
|
|
TARGET_DEVICES += edgecore_ecw5410
|
|
|
|
define Device/linksys_ea7500-v1
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA7500
|
|
DEVICE_VARIANT := v1
|
|
SOC := qcom-ipq8064
|
|
PAGESIZE := 2048
|
|
BLOCKSIZE := 128k
|
|
KERNEL_SIZE := 3072k
|
|
KERNEL = kernel-bin | append-dtb | uImage none | \
|
|
append-uImage-fakehdr filesystem
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi | pad-to $$$$(PAGESIZE)
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
DEFAULT := n
|
|
endef
|
|
TARGET_DEVICES += linksys_ea7500-v1
|
|
|
|
define Device/linksys_ea8500
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA8500
|
|
SOC := qcom-ipq8064
|
|
PAGESIZE := 2048
|
|
BLOCKSIZE := 128k
|
|
KERNEL_SIZE := 3072k
|
|
KERNEL = kernel-bin | append-dtb | uImage none | \
|
|
append-uImage-fakehdr filesystem
|
|
BOARD_NAME := ea8500
|
|
SUPPORTED_DEVICES += ea8500
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
DEFAULT := n
|
|
endef
|
|
TARGET_DEVICES += linksys_ea8500
|
|
|
|
define Device/meraki_mr42
|
|
$(call Device/FitImage)
|
|
DEVICE_VENDOR := Cisco Meraki
|
|
DEVICE_MODEL := MR42
|
|
SOC := qcom-ipq8068
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_LOADADDR = 0x44208000
|
|
DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
|
|
-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
|
|
-kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
|
|
-uboot-envtools ath10k-firmware-qca9887-ct \
|
|
ath10k-firmware-qca99x0-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
|
|
kmod-leds-tlc591xx
|
|
endef
|
|
TARGET_DEVICES += meraki_mr42
|
|
|
|
define Device/meraki_mr52
|
|
$(call Device/FitImage)
|
|
DEVICE_VENDOR := Cisco Meraki
|
|
DEVICE_MODEL := MR52
|
|
SOC := qcom-ipq8068
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_LOADADDR = 0x44208000
|
|
DEVICE_DTS_CONFIG := config@2
|
|
DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
|
|
-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
|
|
-kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
|
|
-uboot-envtools ath10k-firmware-qca9887-ct \
|
|
ath10k-firmware-qca9984-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
|
|
kmod-leds-tlc591xx
|
|
endef
|
|
TARGET_DEVICES += meraki_mr52
|
|
|
|
define Device/nec_wg2600hp
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := NEC
|
|
DEVICE_MODEL := Aterm WG2600HP
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 64k
|
|
BOARD_NAME := wg2600hp
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
|
pad-rootfs | append-metadata
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += nec_wg2600hp
|
|
|
|
define Device/nec_wg2600hp3
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := NEC Platforms
|
|
DEVICE_MODEL := Aterm WG2600HP3
|
|
SOC := qcom-ipq8062
|
|
BLOCKSIZE := 64k
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
|
pad-rootfs | append-metadata
|
|
DEVICE_PACKAGES := -kmod-ata-ahci -kmod-ata-ahci-platform \
|
|
-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
|
|
-kmod-usb-phy-qcom-dwc3 -kmod-usb3 -kmod-usb-dwc3-qcom \
|
|
ath10k-firmware-qca9984-ct ipq-wifi-nec_wg2600hp3
|
|
endef
|
|
TARGET_DEVICES += nec_wg2600hp3
|
|
|
|
define Device/netgear_d7800
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4 D7800
|
|
SOC := qcom-ipq8064
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := D7800
|
|
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := d7800
|
|
SUPPORTED_DEVICES += d7800
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
DEVICE_COMPAT_VERSION := 2.0
|
|
DEVICE_COMPAT_MESSAGE := Sysupgrade does not work due to rootfs ubi partition size change. \
|
|
Use factory image with the TFTP recovery flash routine.
|
|
endef
|
|
TARGET_DEVICES += netgear_d7800
|
|
|
|
define Device/netgear_r7500
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4 R7500
|
|
DEVICE_VARIANT := v1
|
|
SOC := qcom-ipq8064
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := R7500
|
|
NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7500
|
|
SUPPORTED_DEVICES += r7500
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_r7500
|
|
|
|
define Device/netgear_r7500v2
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4 R7500
|
|
DEVICE_VARIANT := v2
|
|
SOC := qcom-ipq8064
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := R7500v2
|
|
NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7500v2
|
|
SUPPORTED_DEVICES += r7500v2
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct \
|
|
ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_r7500v2
|
|
|
|
define Device/netgear_r7800
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4S R7800
|
|
SOC := qcom-ipq8065
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := R7800
|
|
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7800
|
|
SUPPORTED_DEVICES += r7800
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_r7800
|
|
|
|
define Device/netgear_xr500
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk XR500
|
|
SOC := qcom-ipq8065
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := XR500
|
|
NETGEAR_HW_ID := 29764958+0+256+512+4x4+4x4+cascade
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_xr500
|
|
|
|
define Device/qcom_ipq8064-ap148
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := AP148
|
|
DEVICE_VARIANT := standard
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-ap148
|
|
KERNEL_INSTALL := 1
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap148
|
|
SUPPORTED_DEVICES += ap148
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap148
|
|
|
|
define Device/qcom_ipq8064-ap148-legacy
|
|
$(call Device/LegacyImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := AP148
|
|
DEVICE_VARIANT := legacy
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-ap148
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap148
|
|
SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap148-legacy
|
|
|
|
define Device/qcom_ipq8064-ap161
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := AP161
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-ap161
|
|
KERNEL_INSTALL := 1
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap161
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap161
|
|
|
|
define Device/qcom_ipq8064-db149
|
|
$(call Device/FitImage)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := DB149
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-db149
|
|
KERNEL_INSTALL := 1
|
|
BOARD_NAME := db149
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-db149
|
|
|
|
define Device/tplink_ad7200
|
|
$(call Device/TpSafeImage)
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := AD7200
|
|
DEVICE_VARIANT := v1/v2
|
|
DEVICE_ALT0_VENDOR := TP-Link
|
|
DEVICE_ALT0_MODEL := Talon AD7200
|
|
DEVICE_ALT0_VARIANT := v1/v2
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
TPLINK_BOARD_ID := AD7200
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-wil6210
|
|
endef
|
|
TARGET_DEVICES += tplink_ad7200
|
|
|
|
define Device/tplink_c2600
|
|
$(call Device/TpSafeImage)
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := Archer C2600
|
|
DEVICE_VARIANT := v1
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := c2600
|
|
SUPPORTED_DEVICES += c2600
|
|
TPLINK_BOARD_ID := C2600
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += tplink_c2600
|
|
|
|
define Device/tplink_vr2600v
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := Archer VR2600v
|
|
DEVICE_VARIANT := v1
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
IMAGE_SIZE := 12672k
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := vr2600v
|
|
SUPPORTED_DEVICES += vr2600v
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | \
|
|
append-rootfs | pad-rootfs | append-metadata
|
|
endef
|
|
TARGET_DEVICES += tplink_vr2600v
|
|
|
|
define Device/ubnt_unifi-ac-hd
|
|
$(call Device/FitImageLzma)
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_MODEL := UniFi AC HD
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 64k
|
|
IMAGE_SIZE := 14784k
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | append-metadata
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifi-ac-hd
|
|
|
|
define Device/zyxel_nbg6817
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NBG6817
|
|
SOC := qcom-ipq8065
|
|
KERNEL_SIZE := 4096k
|
|
BLOCKSIZE := 64k
|
|
BOARD_NAME := nbg6817
|
|
RAS_BOARD := NBG6817
|
|
RAS_ROOTFS_SIZE := 20934k
|
|
RAS_VERSION := "V1.99(OWRT.9999)C0"
|
|
SUPPORTED_DEVICES += nbg6817
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs \
|
|
kmod-fs-ext4 losetup
|
|
$(call Device/ZyXELImage)
|
|
endef
|
|
TARGET_DEVICES += zyxel_nbg6817
|