ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-30 18:47:06 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
fa11e6e0d6
openwrt/target/linux/ramips/image/Makefile
Gabor Juhos b3fdd931d1 ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards 
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.

There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.

Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt

[juhosg: reordered some parts in order to keep things sorted
alphabetically]

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>

SVN-Revision: 29910
2012-01-26 10:44:23 +00:00

366 lines
14 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2008-2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
define imgname
$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)
endef
VMLINUX:=$(IMG_PREFIX)-vmlinux
UIMAGE:=$(IMG_PREFIX)-uImage
ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs
UIMAGE:=$(IMG_PREFIX)-uImage-initramfs
endif
ifeq ($(CONFIG_RALINK_RT288X),y)
define kernel_entry
-a 0x88000000 -e 0x88000000
endef
else
define kernel_entry
-a 0x80000000 -e 0x80000000
endef
endif
define CompressLzma
$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
endef
define PatchKernelLzma
cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
$(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma)
endef
define MkImage
mkimage -A mips -O linux -T kernel -C $(1) $(call kernel_entry)\
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(2) $(3)
endef
define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin
$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
$(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
endef
define BuildFirmware/Generic
$(call PatchKernelLzma,$(2),$(3) $($(4)))
$(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
fi; fi
endef
define BuildFirmware/WL341V3
$(call PatchKernelLzma,$(2),$(3) $($(4)))
$(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
( \
dd if=/dev/zero bs=195936 count=1; \
echo "1.01"; \
dd if=/dev/zero bs=581 count=1; \
echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \
dd if=/dev/zero bs=65552 count=1; \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(5) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \
echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \
) > $(call imgname,$(1),$(2))-factory.bin; \
fi; fi
endef
define BuildFirmware/Buffalo
$(call PatchKernelLzma,$(2),board=$(3) $($(4)))
$(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
buffalo-enc -p $(3) -v 1.76 \
-i $(KDIR)/vmlinux-$(2).uImage \
-o $(KDIR)/vmlinux-$(2).uImage.enc; \
buffalo-enc -p $(3) -v 1.76 \
-i $(KDIR)/root.$(1) \
-o $(KDIR)/root.$(2).enc; \
buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \
-l mlang8 -f 1 -r EU \
-i $(KDIR)/vmlinux-$(2).uImage.enc \
-i $(KDIR)/root.$(2).enc \
-o $(call imgname,$(1),$(2))-factory-EU.bin; \
fi; fi
endef
define BuildFirmware/Buffalo2
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),$($(4)),$(5),$(6))
endef
define BuildFirmware/NW718
$(call PatchKernelLzma,$(2),$(3) $($(4)))
mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry) \
-n "ARA1B4NCRNW718;1" \
-d "$(KDIR)/vmlinux-$(2).bin.lzma" \
"$(KDIR)/vmlinux-$(2).uImage"
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
) > $(call imgname,$(1),$(2))-factory.bin; \
fi; fi
endef
define BuildFirmware/Edimax
mkedimaximg -i $(call imgname,$(1),$(2))-sysupgrade.bin \
-o $(call imgname,$(1),$(2))-factory.bin \
-s $(3) -m $(4) -f $(5) -S $(6)
endef
mtdlayout_4M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
define Image/Build/Template/GENERIC_4M
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_4M,851968,3014656)
endef
mtdlayout_8M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
kernel_size_8M=851968
rootfs_size_8M=7208960
define Image/Build/Template/GENERIC_8M
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_8M,$(kernel_size_8M),$(rootfs_size_8M))
endef
mtdlayout_dir300b1=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
mtd_dir300b1_kernel_part_size=851968
mtd_dir300b1_rootfs_part_size=3014656
define Image/Build/Template/DIR300B1
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_dir300b1,$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
mkwrgimg -s $(4) -d /dev/mtdblock/2 \
-i $(call imgname,$(1),$(2))-sysupgrade.bin \
-o $(call imgname,$(1),$(2))-factory.bin
endef
mtdlayout_nw718=mtdparts=spi0.0:192k(u-boot)ro,128k(config)ro,64k(factory)ro,832k(kernel),2880k(rootfs),3712k@0x60000(firmware)
define Image/Build/Template/NW718
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
$(call BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
endef
console_OMNIEMB=ttyS1,57600
mtdlayout_ONMIEMB=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),6848k(rootfs),7872k@0x50000(firmware)
define Image/Build/Template/OMNIEMB
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) console=$(console_OMNIEMB),mtdlayout_OMNIEMB,1048576,7012352)
endef
mtdlayout_sercomm_4M=mtdparts=physmap-flash.0:128k(u-boot)ro,64k(board-nvram)ro,64k(u-boot-env)ro,832k(kernel),2944k(rootfs),64k(signature-eRcOmM),3776k@0x40000(firmware),4096k@0x0(fullflash)
define Image/Build/Template/WL341V3
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_sercomm_4M,851968,3014656)
$(call BuildFirmware/WL341V3,$(1),$(2),board=$(3),mtdlayout_sercomm_4M,851968,3014656)
endef
define Image/Build/Profile/WL341V3
$(call Image/Build/Template/WL341V3,$(1),wl341v3,WL341V3)
endef
define Image/Build/Profile/DIR300B1
$(call Image/Build/Template/DIR300B1,$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
$(call Image/Build/Template/DIR300B1,$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
$(call Image/Build/Template/DIR300B1,$(1),dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
endef
mtdlayout_rtg32b1=mtdparts=spi0.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
mtd_rtg32b1_kernel_part_size=851968
mtd_rtg32b1_rootfs_part_size=3014656
define Image/Build/Template/RTG32B1
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_rtg32b1,$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size))
endef
define Image/Build/Profile/RTG32B1
$(call Image/Build/Template/RTG32B1,$(1),rt-g32-b1,RT-G32-B1)
endef
define Image/Build/Profile/ESR9753
$(call Image/Build/Template/GENERIC_4M,$(1),esr-9753,ESR-9753)
endef
define Image/Build/Profile/FONERA20N
$(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N)
$(call BuildFirmware/Edimax,$(1),fonera20n,RSDK,NL1T,0x50000,0xc0000)
endef
define Image/Build/Profile/BC2
$(call Image/Build/Template/GENERIC_8M,$(1),bc2,BC2)
endef
define Image/Build/Profile/ALL0256N
$(call Image/Build/Template/GENERIC_4M,$(1),all0256n,ALL0256N)
endef
define Image/Build/Profile/NBG419N
$(call Image/Build/Template/GENERIC_4M,$(1),nbg-419n,NBG-419N)
endef
define Image/Build/Profile/WL351
$(call Image/Build/Template/GENERIC_4M,$(1),wl-351,WL-351)
endef
define Image/Build/Profile/NW718
$(call Image/Build/Template/NW718,$(1),nw718,NW718)
endef
define Image/Build/Profile/OMNIEMB
$(call Image/Build/Template/OMNIEMB,$(1),omni-emb,OMNI-EMB)
endef
define Image/Build/Profile/PWH2004
$(call Image/Build/Template/GENERIC_8M,$(1),pwh2004,PWH2004)
endef
define Image/Build/Profile/V22RW2X2
$(call Image/Build/Template/GENERIC_4M,$(1),v22rw-2x2,V22RW-2X2)
endef
mtdlayout_whrg300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware)
define Image/Build/Profile/WHRG300N
$(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N)
$(call BuildFirmware/Buffalo,$(1),whr-g300n,WHR-G300N,mtdlayout_whrg300n,983040,3801088)
( \
echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \
dd bs=512 count=1 conv=sync; \
dd if=$(call imgname,$(1),whr-g300n)-sysupgrade.bin; \
) > $(KDIR)/whr-g300n-tftp.tmp
buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \
-o $(call imgname,$(1),whr-g300n)-tftp.bin
endef
define Image/Build/Profile/HW5503G
$(call Image/Build/Template/GENERIC_8M,$(1),hw550-3g,HW550-3G)
endef
define Image/Build/Profile/MOFI35003GN
$(call Image/Build/Template/GENERIC_8M,$(1),mofi3500-3gn,MOFI3500-3GN)
endef
define Image/Build/Profile/WCR150GN
$(call Image/Build/Template/GENERIC_4M,$(1),wcr150gn,WCR150GN)
endef
w502u_cmdline=board=W502U console=ttyS1,115200
define Image/Build/Profile/W502U
$(call BuildFirmware/Generic,$(1),w502u,$(w502u_cmdline),mtdlayout_8M,$(kernel_size_8M),$(rootfs_size_8M))
endef
mtdlayout_argus_atp52b=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware)
mtd_argus_atp52b_kernel_part_size=1179648
mtd_argus_atp52b_rootfs_part_size=6815744
define Image/Build/Template/ARGUS_ATP52B
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_argus_atp52b,$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size))
endef
define Image/Build/Profile/ARGUS_ATP52B
$(call Image/Build/Template/ARGUS_ATP52B,$(1),argus_atp52b,ARGUS_ATP52B)
endef
mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
mtd_f5d8235_kernel_part_size=1572864
mtd_f5d8235_rootfs_part_size=6356992
define Image/Build/Template/F5D8235V2
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
endef
define Image/Build/Profile/F5D8235V2
$(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
endef
define Image/Build/Template/F5D8235V1
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
endef
mtdlayout_wr5123gn=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
mtdlayout_wr5123gn8m=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
define Image/Build/Profile/WR5123GN
$(call BuildFirmware/Generic,$(1),wr512-3gn-4M,board="WR512-3GN",mtdlayout_wr5123gn,851968,3014656)
$(call BuildFirmware/Generic,$(1),wr512-3gn-8M,board="WR512-3GN",mtdlayout_wr5123gn8m,851968,7208960)
endef
ifeq ($(CONFIG_RALINK_RT305X),y)
define Image/Build/Profile/Default
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
$(call Image/Build/Profile/BC2,$(1))
$(call Image/Build/Profile/ALL0256N,$(1))
$(call Image/Build/Profile/DIR300B1,$(1))
$(call Image/Build/Profile/ESR9753,$(1))
$(call Image/Build/Profile/RTG32B1,$(1))
$(call Image/Build/Profile/FONERA20N,$(1))
$(call Image/Build/Profile/V22RW2X2,$(1))
$(call Image/Build/Profile/NBG419N,$(1))
$(call Image/Build/Profile/NW718,$(1))
$(call Image/Build/Profile/OMNIEMB,$(1))
$(call Image/Build/Profile/PWH2004,$(1))
$(call Image/Build/Profile/WHRG300N,$(1))
$(call Image/Build/Profile/WCR150GN,$(1))
$(call Image/Build/Profile/F5D8235V2,$(1))
$(call Image/Build/Profile/HW5503G,$(1))
$(call Image/Build/Profile/MOFI35003GN,$(1))
$(call Image/Build/Profile/W502U,$(1))
$(call Image/Build/Profile/WR5123GN,$(1))
$(call Image/Build/Profile/WL341V3,$(1))
$(call Image/Build/Profile/WL351,$(1))
endef
endif
define Image/Build/Profile/F5D8235V1
$(call Image/Build/Template/F5D8235V1,$(1),f5d8235v1,F5D8235_V1)
endef
define Image/Build/Profile/RTN15
$(call Image/Build/Template/GENERIC_4M,$(1),rt-n15,RT-N15)
endef
mtdlayout_wlitx4ag300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2880k(rootfs),64k(user)ro,3712k@0x50000(firmware)
define Image/Build/Profile/WLITX4AG300N
$(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,mtdlayout_wlitx4ag300n,851968,2949120)
endef
ifeq ($(CONFIG_RALINK_RT288X),y)
define Image/Build/Profile/Default
$(call Image/Build/Profile/F5D8235V1,$(1))
$(call Image/Build/Profile/RTN15,$(1))
$(call Image/Build/Profile/WLITX4AG300N,$(1))
endef
endif
define Image/Build/squashfs
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
endef
define Image/Build
$(call Image/Build/$(1))
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
$(call Image/Build/Profile/$(PROFILE),$(1))
endef
$(eval $(call BuildImage))
Reference in New Issue View Git Blame Copy Permalink