mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
b1f21329d4
Qualcomm IPQ40xx SoC-s have a variant of QCA8337N switch built-in. It shares most of the stuff with its external counterpart, however it is modified for the SoC. Namely, it doesn't have second CPU port (Port 6), so it has 6 ports instead of 7. It also has no built-in PHY-s but rather requires external PSGMII based companion PHY-s (QCA8072 and QCA8075) for which it first needs to carry out calibration before using them. PSGMII has a SoC built-in PHY that is used to connect to the PHY-s which unfortunately requires some magic values as the datasheet doesnt document the bits that are being set or the register at all. Since its built-in it is MMIO like other peripherals and doesn't have its own MDIO bus but depends on the SoC provided one. CPU connection is at Port 0 and it uses some kind of a internal connection and no traditional RGMII/SGMII. It also doesn't use in-band tagging like other qca8k switches so a shinfo based tagger is used. This is based on the current OpenWrt qca8k version that has been imported from generic target. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
51 lines
1.9 KiB
Diff
51 lines
1.9 KiB
Diff
From f825cdc8bfde7616a14e2163f16303a8973031d2 Mon Sep 17 00:00:00 2001
|
|
From: Robert Marko <robert.marko@sartura.hr>
|
|
Date: Wed, 7 Oct 2020 17:38:48 +0200
|
|
Subject: [PATCH] net: phy: Add Qualcom QCA807x driver
|
|
|
|
This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s.
|
|
|
|
They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and 1000BASE-T PHY-s.
|
|
|
|
They feature 2 SerDes, one for PSGMII or QSGMII connection with MAC, while second one is SGMII for connection to MAC or fiber.
|
|
|
|
Both models have a combo port that supports 1000BASE-X and 100BASE-FX fiber.
|
|
|
|
Each PHY inside of QCA807x series has 4 digitally controlled output only pins that natively drive LED-s.
|
|
But some vendors used these to driver generic LED-s controlled by userspace,
|
|
so lets enable registering each PHY as GPIO controller and add driver for it.
|
|
|
|
These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x boards.
|
|
|
|
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
|
|
---
|
|
drivers/net/phy/Kconfig | 6 ++++++
|
|
drivers/net/phy/Makefile | 1 +
|
|
2 files changed, 7 insertions(+)
|
|
|
|
--- a/drivers/net/phy/Kconfig
|
|
+++ b/drivers/net/phy/Kconfig
|
|
@@ -346,6 +346,12 @@ config AT803X_PHY
|
|
Currently supports the AR8030, AR8031, AR8033, AR8035 and internal
|
|
QCA8337(Internal qca8k PHY) model
|
|
|
|
+config QCA807X_PHY
|
|
+ tristate "Qualcomm QCA807X PHYs"
|
|
+ depends on OF_MDIO
|
|
+ help
|
|
+ Currently supports the QCA8072 and QCA8075 models.
|
|
+
|
|
config QSEMI_PHY
|
|
tristate "Quality Semiconductor PHYs"
|
|
help
|
|
--- a/drivers/net/phy/Makefile
|
|
+++ b/drivers/net/phy/Makefile
|
|
@@ -92,6 +92,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o
|
|
obj-$(CONFIG_NXP_C45_TJA11XX_PHY) += nxp-c45-tja11xx.o
|
|
obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o
|
|
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
|
|
+obj-$(CONFIG_QCA807X_PHY) += qca807x.o
|
|
obj-$(CONFIG_REALTEK_PHY) += realtek.o
|
|
obj-$(CONFIG_RENESAS_PHY) += uPD60620.o
|
|
obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o
|