ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 14:13:16 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
fa02225ee6
openwrt/target/linux/ipq806x/files/arch/arm/boot/dts
History
Jan Alexander 4e46beb313 ipq806x: add support for Ubiquiti UniFi AC HD 
Hardware
--------

SoC:   Qualcomm IPQ8064
RAM:   512MB DDR3
Flash: 256MB NAND (Micron MT29F2G08ABBEAH4)
       32MB SPI-NOR (Macronix MX25U25635F)
WLAN:  Qualcomm Atheros QCA9994 4T4R b/g/n
       Qualcomm Atheros QCA9994 4T4R a/n/ac
ETH:   eth0 - SECONDARY (Atheros AR8033)
       eth1 - MAIN (Atheros AR8033)
USB:   USB-C
LED:   Dome (white / blue)
BTN:   Reset

Installation
------------

Copy the OpenWrt sysupgrade image to the /tmp directory of the device
using scp. Default IP address is 192.168.1.20 and default username and
password are "ubnt".

SSH to the device and write the bootselect flag to ensure it is booting
from the mtd partition the OpenWrt image will be written to. Verify the
output device below matches mtd partition "bootselect" using /proc/mtd.

> dd if=/dev/zero bs=1 count=1 seek=7 conv=notrunc of=/dev/mtd11

Write the OpenWrt sysupgrade image to the mtd partition labeled
"kernel0". Also verify the used partition device using /proc/mtd.

> dd if=/tmp/sysupgrade.bin of=/dev/mtdblock12

Reboot the device.

Back to stock
-------------

Use the TFTP recovery procedure with the Ubiquiti firmware image to
restore the vendor firmware.

Signed-off-by: Jan Alexander <jan@nalx.net>
2021-01-14 01:03:54 +01:00
..
qcom-ipq8062-wg2600hp3.dts ipq806x: add support for NEC Platforms Aterm WG2600HP3 2020-12-25 10:38:13 +01:00
qcom-ipq8062.dtsi ipq806x: add support for Qualcomm IPQ8062 SoC 2020-12-25 10:38:13 +01:00
qcom-ipq8064-ad7200-c2600.dtsi ipq806x: add space before SPDX identifier (again) 2021-01-06 23:53:25 +01:00
qcom-ipq8064-ad7200.dts ipq806x: add space before SPDX identifier (again) 2021-01-06 23:53:25 +01:00
qcom-ipq8064-ap148.dts ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00
qcom-ipq8064-ap161.dts ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00
qcom-ipq8064-c2600.dts ipq806x: create DTSI for TP-Link AD7200 and C2600 2021-01-06 14:43:12 +01:00
qcom-ipq8064-d7800.dts ipq806x: Fix gmac1 (WAN) on Netgear D7800 2020-12-22 18:59:10 +01:00
qcom-ipq8064-db149.dts ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00
qcom-ipq8064-ea7500-v1.dts ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00
qcom-ipq8064-ea8500.dts ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00
qcom-ipq8064-eax500.dtsi ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00
qcom-ipq8064-g10.dts ipq806x: consolidate DTS files directory 2021-01-03 15:50:55 +01:00
qcom-ipq8064-r7500.dts ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00
qcom-ipq8064-r7500v2.dts ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00
qcom-ipq8064-unifi-ac-hd.dts ipq806x: add support for Ubiquiti UniFi AC HD 2021-01-14 01:03:54 +01:00
qcom-ipq8064-v2.0.dtsi ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00
qcom-ipq8064-vr2600v.dts ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00
qcom-ipq8064-wg2600hp.dts ipq806x: disable SPC of IPQ8064 on NEC WG2600HP to fix boot issue 2020-12-22 19:11:50 +01:00
qcom-ipq8064-wpq864.dts ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00
qcom-ipq8064-wxr-2533dhp.dts ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00
qcom-ipq8065-nbg6817.dts ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00
qcom-ipq8065-r7800.dts ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00
qcom-ipq8065.dtsi ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00
qcom-ipq8068-ecw5410.dts ipq806x: remove support for kernel 4.19 2020-10-19 15:37:54 +02:00