INAGAKI Hiroshi ce93445cd6 ramips: add support for ELECOM WRC-2533GST ... ELECOM WRC-2533GST is a 2.4/5 GHz band 11ac rotuer, based on MediaTek MT7621A. Specification: - MT7621A (2-Core, 4-Threads) - 128 MB of RAM (DDR3) - 16 MB of Flash (SPI) - 4T4R 2.4/5 GHz wifi - MediaTek MT7615 - 5x 10/100/1000 Mbps Ethernet - 4x LEDs, 6 keys (2x buttons, 1x slide switch) - UART header on PCB - Vcc, GND, TX, RX from ethernet port side - baudrate: 57600 bps Flash instruction using factory image: 1. Connect the computer to the LAN port of WRC-2533GST 2. Connect power cable to WRC-2533GST and turn on it 3. Access to "https://192.168.2.1/" and open firmware update page ("ファームウェア更新") 4. Select the OpenWrt factory image and click apply ("適用") button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2018-07-30 15:55:21 +02:00
..
board.d	ramips: add support for ELECOM WRC-2533GST	2018-07-30 15:55:21 +02:00
hotplug.d	ramips: add support for DLINK DWR-921-C1	2018-04-04 08:42:35 +02:00
init.d	treewide: use the generic board_name function	2017-07-15 23:13:34 +02:00
uci-defaults	ramips: use generic board detection for D-Link DAP-1522 A1	2018-02-20 19:25:17 +01:00
diag.sh	ramips: remove stale get_status_led call	2018-07-25 08:57:17 +02:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00