openwrt/target/linux/brcm63xx/patches-3.10/556-board_96318ref_p300.patch
Jonas Gorski f92b2a956b brcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL router
This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
router.
It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
modem equipped with 64 MiB RAM and 8 MiB flash.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4266/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39671
2014-02-22 11:16:30 +00:00

106 lines
1.8 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -186,6 +186,94 @@ static struct board_info __initdata boar
},
},
};
+
+static struct board_info __initdata board_96318ref_p300 = {
+ .name = "96318REF_P300",
+ .expected_cpu_id = 0x6318,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+
+ .has_usbd = 1,
+
+ .usbd = {
+ .use_fullspeed = 0,
+ .port_no = 0,
+ },
+
+ .has_enetsw = 1,
+
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .leds = {
+ {
+ .name = "96318REF_P300:red:post-failed",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ {
+ .name = "96318REF_P300:green:inet",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "96318REF_P300:red:inet-fail",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "96318REF_P300::usb-pwron",
+ .gpio = 13,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "wps",
+ .gpio = 33,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ {
+ .desc = "reset",
+ .gpio = 34,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
#endif
/*
@@ -4257,6 +4345,7 @@ static const struct board_info __initcon
#endif
#ifdef CONFIG_BCM63XX_CPU_6318
&board_96318ref,
+ &board_96318ref_p300,
#endif
#ifdef CONFIG_BCM63XX_CPU_6328
&board_96328avng,