mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 09:39:00 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
249 lines
5.3 KiB
Diff
249 lines
5.3 KiB
Diff
From ab6b50d10b73ed3150dd80633131b7d56c1c63df Mon Sep 17 00:00:00 2001
|
|
From: penfold42 <penfold42@users.noreply.github.com>
|
|
Date: Tue, 2 Jan 2018 00:15:19 +1100
|
|
Subject: [PATCH 146/454] Add overlay for mcp3202 12 bit ADC
|
|
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
|
arch/arm/boot/dts/overlays/README | 9 +
|
|
.../arm/boot/dts/overlays/mcp3202-overlay.dts | 205 ++++++++++++++++++
|
|
3 files changed, 215 insertions(+)
|
|
create mode 100755 arch/arm/boot/dts/overlays/mcp3202-overlay.dts
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -61,6 +61,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
mcp2515-can0.dtbo \
|
|
mcp2515-can1.dtbo \
|
|
mcp3008.dtbo \
|
|
+ mcp3202.dtbo \
|
|
media-center.dtbo \
|
|
midi-uart0.dtbo \
|
|
midi-uart1.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -994,6 +994,15 @@ Params: spi<n>-<m>-present boolean,
|
|
spi<n>-<m>-speed integer, set the spi bus speed for this device
|
|
|
|
|
|
+Name: mcp3202
|
|
+Info: Configures MCP3202 A/D converters
|
|
+ For devices on spi1 or spi2, the interfaces should be enabled
|
|
+ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays.
|
|
+Load: dtoverlay=mcp3202,<param>[=<val>]
|
|
+Params: spi<n>-<m>-present boolean, configure device at spi<n>, cs<m>
|
|
+ spi<n>-<m>-speed integer, set the spi bus speed for this device
|
|
+
|
|
+
|
|
Name: media-center
|
|
Info: Media Center HAT - 2.83" Touch Display + extras by Pi Supply
|
|
Load: dtoverlay=media-center,<param>=<val>
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/mcp3202-overlay.dts
|
|
@@ -0,0 +1,205 @@
|
|
+/*
|
|
+ * Device tree overlay for Microchip mcp3202 12-Bit A/D Converters
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&spidev0>;
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@1 {
|
|
+ target = <&spidev1>;
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@2 {
|
|
+ target-path = "spi1/spidev@0";
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@3 {
|
|
+ target-path = "spi1/spidev@1";
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@4 {
|
|
+ target-path = "spi1/spidev@2";
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@5 {
|
|
+ target-path = "spi2/spidev@0";
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@6 {
|
|
+ target-path = "spi2/spidev@1";
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@7 {
|
|
+ target-path = "spi2/spidev@2";
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@8 {
|
|
+ target = <&spi0>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3202_00: mcp3202@0 {
|
|
+ compatible = "mcp3202";
|
|
+ reg = <0>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@9 {
|
|
+ target = <&spi0>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3202_01: mcp3202@1 {
|
|
+ compatible = "mcp3202";
|
|
+ reg = <1>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@10 {
|
|
+ target = <&spi1>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3202_10: mcp3202@0 {
|
|
+ compatible = "mcp3202";
|
|
+ reg = <0>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@11 {
|
|
+ target = <&spi1>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3202_11: mcp3202@1 {
|
|
+ compatible = "mcp3202";
|
|
+ reg = <1>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@12 {
|
|
+ target = <&spi1>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3202_12: mcp3202@2 {
|
|
+ compatible = "mcp3202";
|
|
+ reg = <2>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@13 {
|
|
+ target = <&spi2>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3202_20: mcp3202@0 {
|
|
+ compatible = "mcp3202";
|
|
+ reg = <0>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@14 {
|
|
+ target = <&spi2>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3202_21: mcp3202@1 {
|
|
+ compatible = "mcp3202";
|
|
+ reg = <1>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@15 {
|
|
+ target = <&spi2>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3202_22: mcp3202@2 {
|
|
+ compatible = "mcp3202";
|
|
+ reg = <2>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ spi0-0-present = <0>, "+0+8";
|
|
+ spi0-1-present = <0>, "+1+9";
|
|
+ spi1-0-present = <0>, "+2+10";
|
|
+ spi1-1-present = <0>, "+3+11";
|
|
+ spi1-2-present = <0>, "+4+12";
|
|
+ spi2-0-present = <0>, "+5+13";
|
|
+ spi2-1-present = <0>, "+6+14";
|
|
+ spi2-2-present = <0>, "+7+15";
|
|
+ spi0-0-speed = <&mcp3202_00>, "spi-max-frequency:0";
|
|
+ spi0-1-speed = <&mcp3202_01>, "spi-max-frequency:0";
|
|
+ spi1-0-speed = <&mcp3202_10>, "spi-max-frequency:0";
|
|
+ spi1-1-speed = <&mcp3202_11>, "spi-max-frequency:0";
|
|
+ spi1-2-speed = <&mcp3202_12>, "spi-max-frequency:0";
|
|
+ spi2-0-speed = <&mcp3202_20>, "spi-max-frequency:0";
|
|
+ spi2-1-speed = <&mcp3202_21>, "spi-max-frequency:0";
|
|
+ spi2-2-speed = <&mcp3202_22>, "spi-max-frequency:0";
|
|
+ };
|
|
+};
|