openwrt/target/linux/ramips/dts/RP-N53.dts
Stanislav Galabov f8b6c9d825 ramips: Change all '/include/' clauses to '#include' so preprocessing can
be done properly for the entire device trees.

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
2016-05-10 10:43:17 +02:00

167 lines
2.4 KiB
Plaintext

/dts-v1/;
#include "mt7620a.dtsi"
/ {
compatible = "asus,rp-n53", "ralink,mt7620a-soc";
model = "Asus RP-N53";
palmbus@10000000 {
gpio1: gpio@638 {
status = "okay";
};
i2c@900 {
status = "okay";
};
i2s@a00 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pcm_i2s_pins>;
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0 0>;
linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
pcm@2000 {
status = "okay";
};
gdma@2800 {
status = "okay";
};
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "mdio", "rgmii1";
ralink,function = "gpio";
};
};
};
gsw@10110000 {
mediatek,port4 = "ephy";
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
};
pcie@10140000 {
status = "okay";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
touch {
label = "touch";
gpios = <&gpio1 0 1>;
linux,code = <0x100>;
};
wps {
label = "wps";
gpios = <&gpio1 1 1>;
linux,code = <0x100>;
};
reset {
label = "reset";
gpios = <&gpio1 2 1>;
linux,code = <0x100>;
};
audio {
label = "audio";
gpios = <&gpio1 3 0>;
linux,code = <0x101>;
};
};
gpio-leds {
compatible = "gpio-leds";
backlight {
label = "rp-n53:white:back";
gpios = <&gpio1 4 1>;
};
wifi0 {
label = "rp-n53:blue:5g3";
gpios = <&gpio1 5 1>;
};
wifi1 {
label = "rp-n53:blue:5g2";
gpios = <&gpio1 6 1>;
};
wifi2 {
label = "rp-n53:blue:5g1";
gpios = <&gpio1 7 1>;
};
wifi3 {
label = "rp-n53:blue:wifi";
gpios = <&gpio1 8 1>;
};
wifi4 {
label = "rp-n53:blue:2g1";
gpios = <&gpio1 9 1>;
};
wifi5 {
label = "rp-n53:blue:2g2";
gpios = <&gpio1 10 1>;
};
wifi6 {
label = "rp-n53:blue:2g3";
gpios = <&gpio1 11 1>;
};
};
};