mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
295 lines
12 KiB
Diff
295 lines
12 KiB
Diff
From 0c3e10cb44232833a50cb8e3e784c432906a60c1 Mon Sep 17 00:00:00 2001
|
|
From: Sean Anderson <sean.anderson@seco.com>
|
|
Date: Tue, 20 Sep 2022 18:12:31 -0400
|
|
Subject: [PATCH] net: phy: Add support for rate matching
|
|
|
|
This adds support for rate matching (also known as rate adaptation) to
|
|
the phy subsystem. The general idea is that the phy interface runs at
|
|
one speed, and the MAC throttles the rate at which it sends packets to
|
|
the link speed. There's a good overview of several techniques for
|
|
achieving this at [1]. This patch adds support for three: pause-frame
|
|
based (such as in Aquantia phys), CRS-based (such as in 10PASS-TS and
|
|
2BASE-TL), and open-loop-based (such as in 10GBASE-W).
|
|
|
|
This patch makes a few assumptions and a few non assumptions about the
|
|
types of rate matching available. First, it assumes that different phys
|
|
may use different forms of rate matching. Second, it assumes that phys
|
|
can use rate matching for any of their supported link speeds (e.g. if a
|
|
phy supports 10BASE-T and XGMII, then it can adapt XGMII to 10BASE-T).
|
|
Third, it does not assume that all interface modes will use the same
|
|
form of rate matching. Fourth, it does not assume that all phy devices
|
|
will support rate matching (even if some do). Relaxing or strengthening
|
|
these (non-)assumptions could result in a different API. For example, if
|
|
all interface modes were assumed to use the same form of rate matching,
|
|
then a bitmask of interface modes supportting rate matching would
|
|
suffice.
|
|
|
|
For some better visibility into the process, the current rate matching
|
|
mode is exposed as part of the ethtool ksettings. For the moment, only
|
|
read access is supported. I'm not sure what userspace might want to
|
|
configure yet (disable it altogether, disable just one mode, specify the
|
|
mode to use, etc.). For the moment, since only pause-based rate
|
|
adaptation support is added in the next few commits, rate matching can
|
|
be disabled altogether by adjusting the advertisement.
|
|
|
|
802.3 calls this feature "rate adaptation" in clause 49 (10GBASE-R) and
|
|
"rate matching" in clause 61 (10PASS-TL and 2BASE-TS). Aquantia also calls
|
|
this feature "rate adaptation". I chose "rate matching" because it is
|
|
shorter, and because Russell doesn't think "adaptation" is correct in this
|
|
context.
|
|
|
|
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
Documentation/networking/ethtool-netlink.rst | 2 ++
|
|
drivers/net/phy/phy-core.c | 21 +++++++++++++++
|
|
drivers/net/phy/phy.c | 28 ++++++++++++++++++++
|
|
include/linux/phy.h | 22 ++++++++++++++-
|
|
include/uapi/linux/ethtool.h | 18 +++++++++++--
|
|
include/uapi/linux/ethtool_netlink.h | 1 +
|
|
net/ethtool/ioctl.c | 1 +
|
|
net/ethtool/linkmodes.c | 5 ++++
|
|
8 files changed, 95 insertions(+), 3 deletions(-)
|
|
|
|
--- a/Documentation/networking/ethtool-netlink.rst
|
|
+++ b/Documentation/networking/ethtool-netlink.rst
|
|
@@ -418,6 +418,7 @@ Kernel response contents:
|
|
``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode
|
|
``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode
|
|
``ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE`` u8 Master/slave port state
|
|
+ ``ETHTOOL_A_LINKMODES_RATE_MATCHING`` u8 PHY rate matching
|
|
========================================== ====== ==========================
|
|
|
|
For ``ETHTOOL_A_LINKMODES_OURS``, value represents advertised modes and mask
|
|
@@ -441,6 +442,7 @@ Request contents:
|
|
``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s)
|
|
``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode
|
|
``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode
|
|
+ ``ETHTOOL_A_LINKMODES_RATE_MATCHING`` u8 PHY rate matching
|
|
``ETHTOOL_A_LINKMODES_LANES`` u32 lanes
|
|
========================================== ====== ==========================
|
|
|
|
--- a/drivers/net/phy/phy-core.c
|
|
+++ b/drivers/net/phy/phy-core.c
|
|
@@ -75,6 +75,27 @@ const char *phy_duplex_to_str(unsigned i
|
|
EXPORT_SYMBOL_GPL(phy_duplex_to_str);
|
|
|
|
/**
|
|
+ * phy_rate_matching_to_str - Return a string describing the rate matching
|
|
+ *
|
|
+ * @rate_matching: Type of rate matching to describe
|
|
+ */
|
|
+const char *phy_rate_matching_to_str(int rate_matching)
|
|
+{
|
|
+ switch (rate_matching) {
|
|
+ case RATE_MATCH_NONE:
|
|
+ return "none";
|
|
+ case RATE_MATCH_PAUSE:
|
|
+ return "pause";
|
|
+ case RATE_MATCH_CRS:
|
|
+ return "crs";
|
|
+ case RATE_MATCH_OPEN_LOOP:
|
|
+ return "open-loop";
|
|
+ }
|
|
+ return "Unsupported (update phy-core.c)";
|
|
+}
|
|
+EXPORT_SYMBOL_GPL(phy_rate_matching_to_str);
|
|
+
|
|
+/**
|
|
* phy_interface_num_ports - Return the number of links that can be carried by
|
|
* a given MAC-PHY physical link. Returns 0 if this is
|
|
* unknown, the number of links else.
|
|
--- a/drivers/net/phy/phy.c
|
|
+++ b/drivers/net/phy/phy.c
|
|
@@ -127,6 +127,33 @@ void phy_print_status(struct phy_device
|
|
EXPORT_SYMBOL(phy_print_status);
|
|
|
|
/**
|
|
+ * phy_get_rate_matching - determine if rate matching is supported
|
|
+ * @phydev: The phy device to return rate matching for
|
|
+ * @iface: The interface mode to use
|
|
+ *
|
|
+ * This determines the type of rate matching (if any) that @phy supports
|
|
+ * using @iface. @iface may be %PHY_INTERFACE_MODE_NA to determine if any
|
|
+ * interface supports rate matching.
|
|
+ *
|
|
+ * Return: The type of rate matching @phy supports for @iface, or
|
|
+ * %RATE_MATCH_NONE.
|
|
+ */
|
|
+int phy_get_rate_matching(struct phy_device *phydev,
|
|
+ phy_interface_t iface)
|
|
+{
|
|
+ int ret = RATE_MATCH_NONE;
|
|
+
|
|
+ if (phydev->drv->get_rate_matching) {
|
|
+ mutex_lock(&phydev->lock);
|
|
+ ret = phydev->drv->get_rate_matching(phydev, iface);
|
|
+ mutex_unlock(&phydev->lock);
|
|
+ }
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+EXPORT_SYMBOL_GPL(phy_get_rate_matching);
|
|
+
|
|
+/**
|
|
* phy_config_interrupt - configure the PHY device for the requested interrupts
|
|
* @phydev: the phy_device struct
|
|
* @interrupts: interrupt flags to configure for this @phydev
|
|
@@ -268,6 +295,7 @@ void phy_ethtool_ksettings_get(struct ph
|
|
cmd->base.duplex = phydev->duplex;
|
|
cmd->base.master_slave_cfg = phydev->master_slave_get;
|
|
cmd->base.master_slave_state = phydev->master_slave_state;
|
|
+ cmd->base.rate_matching = phydev->rate_matching;
|
|
if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
|
|
cmd->base.port = PORT_BNC;
|
|
else
|
|
--- a/include/linux/phy.h
|
|
+++ b/include/linux/phy.h
|
|
@@ -280,7 +280,6 @@ static inline const char *phy_modes(phy_
|
|
}
|
|
}
|
|
|
|
-
|
|
#define PHY_INIT_TIMEOUT 100000
|
|
#define PHY_FORCE_TIMEOUT 10
|
|
|
|
@@ -573,6 +572,7 @@ struct macsec_ops;
|
|
* @lp_advertising: Current link partner advertised linkmodes
|
|
* @eee_broken_modes: Energy efficient ethernet modes which should be prohibited
|
|
* @autoneg: Flag autoneg being used
|
|
+ * @rate_matching: Current rate matching mode
|
|
* @link: Current link state
|
|
* @autoneg_complete: Flag auto negotiation of the link has completed
|
|
* @mdix: Current crossover
|
|
@@ -639,6 +639,8 @@ struct phy_device {
|
|
unsigned irq_suspended:1;
|
|
unsigned irq_rerun:1;
|
|
|
|
+ int rate_matching;
|
|
+
|
|
enum phy_state state;
|
|
|
|
u32 dev_flags;
|
|
@@ -801,6 +803,21 @@ struct phy_driver {
|
|
*/
|
|
int (*get_features)(struct phy_device *phydev);
|
|
|
|
+ /**
|
|
+ * @get_rate_matching: Get the supported type of rate matching for a
|
|
+ * particular phy interface. This is used by phy consumers to determine
|
|
+ * whether to advertise lower-speed modes for that interface. It is
|
|
+ * assumed that if a rate matching mode is supported on an interface,
|
|
+ * then that interface's rate can be adapted to all slower link speeds
|
|
+ * supported by the phy. If iface is %PHY_INTERFACE_MODE_NA, and the phy
|
|
+ * supports any kind of rate matching for any interface, then it must
|
|
+ * return that rate matching mode (preferring %RATE_MATCH_PAUSE to
|
|
+ * %RATE_MATCH_CRS). If the interface is not supported, this should
|
|
+ * return %RATE_MATCH_NONE.
|
|
+ */
|
|
+ int (*get_rate_matching)(struct phy_device *phydev,
|
|
+ phy_interface_t iface);
|
|
+
|
|
/* PHY Power Management */
|
|
/** @suspend: Suspend the hardware, saving state if needed */
|
|
int (*suspend)(struct phy_device *phydev);
|
|
@@ -967,6 +984,7 @@ struct phy_fixup {
|
|
|
|
const char *phy_speed_to_str(int speed);
|
|
const char *phy_duplex_to_str(unsigned int duplex);
|
|
+const char *phy_rate_matching_to_str(int rate_matching);
|
|
|
|
int phy_interface_num_ports(phy_interface_t interface);
|
|
|
|
@@ -1675,6 +1693,8 @@ int phy_disable_interrupts(struct phy_de
|
|
void phy_request_interrupt(struct phy_device *phydev);
|
|
void phy_free_interrupt(struct phy_device *phydev);
|
|
void phy_print_status(struct phy_device *phydev);
|
|
+int phy_get_rate_matching(struct phy_device *phydev,
|
|
+ phy_interface_t iface);
|
|
int phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
|
|
void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode);
|
|
void phy_advertise_supported(struct phy_device *phydev);
|
|
--- a/include/uapi/linux/ethtool.h
|
|
+++ b/include/uapi/linux/ethtool.h
|
|
@@ -1809,6 +1809,20 @@ static inline int ethtool_validate_duple
|
|
#define MASTER_SLAVE_STATE_SLAVE 3
|
|
#define MASTER_SLAVE_STATE_ERR 4
|
|
|
|
+/* These are used to throttle the rate of data on the phy interface when the
|
|
+ * native speed of the interface is higher than the link speed. These should
|
|
+ * not be used for phy interfaces which natively support multiple speeds (e.g.
|
|
+ * MII or SGMII).
|
|
+ */
|
|
+/* No rate matching performed. */
|
|
+#define RATE_MATCH_NONE 0
|
|
+/* The phy sends pause frames to throttle the MAC. */
|
|
+#define RATE_MATCH_PAUSE 1
|
|
+/* The phy asserts CRS to prevent the MAC from transmitting. */
|
|
+#define RATE_MATCH_CRS 2
|
|
+/* The MAC is programmed with a sufficiently-large IPG. */
|
|
+#define RATE_MATCH_OPEN_LOOP 3
|
|
+
|
|
/* Which connector port. */
|
|
#define PORT_TP 0x00
|
|
#define PORT_AUI 0x01
|
|
@@ -2002,8 +2016,8 @@ enum ethtool_reset_flags {
|
|
* reported consistently by PHYLIB. Read-only.
|
|
* @master_slave_cfg: Master/slave port mode.
|
|
* @master_slave_state: Master/slave port state.
|
|
+ * @rate_matching: Rate adaptation performed by the PHY
|
|
* @reserved: Reserved for future use; see the note on reserved space.
|
|
- * @reserved1: Reserved for future use; see the note on reserved space.
|
|
* @link_mode_masks: Variable length bitmaps.
|
|
*
|
|
* If autonegotiation is disabled, the speed and @duplex represent the
|
|
@@ -2054,7 +2068,7 @@ struct ethtool_link_settings {
|
|
__u8 transceiver;
|
|
__u8 master_slave_cfg;
|
|
__u8 master_slave_state;
|
|
- __u8 reserved1[1];
|
|
+ __u8 rate_matching;
|
|
__u32 reserved[7];
|
|
__u32 link_mode_masks[0];
|
|
/* layout of link_mode_masks fields:
|
|
--- a/include/uapi/linux/ethtool_netlink.h
|
|
+++ b/include/uapi/linux/ethtool_netlink.h
|
|
@@ -238,6 +238,7 @@ enum {
|
|
ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG, /* u8 */
|
|
ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE, /* u8 */
|
|
ETHTOOL_A_LINKMODES_LANES, /* u32 */
|
|
+ ETHTOOL_A_LINKMODES_RATE_MATCHING, /* u8 */
|
|
|
|
/* add new constants above here */
|
|
__ETHTOOL_A_LINKMODES_CNT,
|
|
--- a/net/ethtool/ioctl.c
|
|
+++ b/net/ethtool/ioctl.c
|
|
@@ -559,6 +559,7 @@ static int ethtool_get_link_ksettings(st
|
|
= __ETHTOOL_LINK_MODE_MASK_NU32;
|
|
link_ksettings.base.master_slave_cfg = MASTER_SLAVE_CFG_UNSUPPORTED;
|
|
link_ksettings.base.master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED;
|
|
+ link_ksettings.base.rate_matching = RATE_MATCH_NONE;
|
|
|
|
return store_link_ksettings_for_user(useraddr, &link_ksettings);
|
|
}
|
|
--- a/net/ethtool/linkmodes.c
|
|
+++ b/net/ethtool/linkmodes.c
|
|
@@ -70,6 +70,7 @@ static int linkmodes_reply_size(const st
|
|
+ nla_total_size(sizeof(u32)) /* LINKMODES_SPEED */
|
|
+ nla_total_size(sizeof(u32)) /* LINKMODES_LANES */
|
|
+ nla_total_size(sizeof(u8)) /* LINKMODES_DUPLEX */
|
|
+ + nla_total_size(sizeof(u8)) /* LINKMODES_RATE_MATCHING */
|
|
+ 0;
|
|
ret = ethnl_bitset_size(ksettings->link_modes.advertising,
|
|
ksettings->link_modes.supported,
|
|
@@ -143,6 +144,10 @@ static int linkmodes_fill_reply(struct s
|
|
lsettings->master_slave_state))
|
|
return -EMSGSIZE;
|
|
|
|
+ if (nla_put_u8(skb, ETHTOOL_A_LINKMODES_RATE_MATCHING,
|
|
+ lsettings->rate_matching))
|
|
+ return -EMSGSIZE;
|
|
+
|
|
return 0;
|
|
}
|
|
|