openwrt/target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts
Christian Marangi e3ddfcc70c
ath79: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:34 +01:00

152 lines
2.6 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-only
#include "ar9132.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
model = "TP-Link TL-WR1043ND v1";
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
label-mac-device = &eth0;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
qss {
label = "qss";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
usb {
function = LED_FUNCTION_USB;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
led_system: system {
label = "green:system";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
qss {
label = "green:qss";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
wlan {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
rtl8366rb {
compatible = "realtek,rtl8366rb";
gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>;
resets = <&rst 8>;
reset-names = "switch";
};
};
&usb {
status = "okay";
};
&usb_phy {
status = "okay";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_uboot_1fc00: macaddr@1fc00 {
reg = <0x1fc00 0x6>;
};
};
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x7D0000>;
};
art: partition@7F0000 {
label = "art";
reg = <0x7F0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii";
nvmem-cells = <&macaddr_uboot_1fc00>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
nvmem-cells = <&macaddr_uboot_1fc00>;
nvmem-cell-names = "mac-address";
};