openwrt/target/linux/ath79/dts/ar7161_adtran_bsap1880.dtsi
Christian Marangi e3ddfcc70c
ath79: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:34 +01:00

96 lines
1.6 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7100.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &led_status_green;
led-failsafe = &led_status_yellow;
led-running = &led_status_green;
led-upgrade = &led_status_yellow;
};
leds {
compatible = "gpio-leds";
wlan5g {
label = "green:wifi5g";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan2g {
label = "green:wifi2g";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led_status_green: status_green {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
led_status_yellow: status_yellow {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_YELLOW>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <&phy0>;
};
&pcie0 {
status = "okay";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
#address-cells = <1>;
#size-cells = <1>;
compatible = "redboot-fis";
fis-index-block = <0xfd>;
};
};
};