mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 06:57:57 +00:00
2e5252d346
GL.iNet GL-AR750 is a small size, dual-band (AC750) router, based on Qualcomm/Atheros QCA9531 v2 + QCA9887. FCC ID: 2AFIW-AR750. Specification: - 650/597/216 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3x 10/100 Mbps Ethernet - 2T2R 2.4 GHz (QCA9531) - 1T1R 5 GHz (QCA9887) - 1x USB 2.0 (power controlled by GPIO) - 1x microSD (GL857L) - 3x LED (all driven by GPIO) - 1x button (reset) - 1x 2-pos switch - header for optional PoE module - 1x micro USB for main power input - UART + I2C header on PCB Flash instruction: Vendor firmware is based on OpenWrt/LEDE. GUI or sysupgrade can be used to flash OpenWrt/LEDE firmware. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
147 lines
3.7 KiB
C
147 lines
3.7 KiB
C
/*
|
|
* GL.iNet GL-AR750 board support
|
|
*
|
|
* Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-gpio.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define GL_AR750_GPIO_LED_POWER 12
|
|
#define GL_AR750_GPIO_LED_WLAN2G 14
|
|
#define GL_AR750_GPIO_LED_WLAN5G 13
|
|
|
|
#define GL_AR750_GPIO_BTN_RESET 3
|
|
#define GL_AR750_GPIO_BTN_SW1 0
|
|
|
|
#define GL_AR750_GPIO_I2C_SCL 16
|
|
#define GL_AR750_GPIO_I2C_SDA 17
|
|
|
|
#define GL_AR750_GPIO_USB_POWER 2
|
|
|
|
#define GL_AR750_KEYS_POLL_INTERVAL 20
|
|
#define GL_AR750_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR750_KEYS_POLL_INTERVAL)
|
|
|
|
#define GL_AR750_MAC0_OFFSET 0
|
|
#define GL_AR750_WMAC2G_CALDATA_OFFSET 0x1000
|
|
#define GL_AR750_WMAC5G_CALDATA_OFFSET 0x5000
|
|
|
|
static struct gpio_led gl_ar750_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "gl-ar750:white:power",
|
|
.gpio = GL_AR750_GPIO_LED_POWER,
|
|
.default_state = LEDS_GPIO_DEFSTATE_KEEP,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "gl-ar750:white:wlan2g",
|
|
.gpio = GL_AR750_GPIO_LED_WLAN2G,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "gl-ar750:white:wlan5g",
|
|
.gpio = GL_AR750_GPIO_LED_WLAN5G,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button gl_ar750_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = GL_AR750_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = GL_AR750_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
}, {
|
|
.desc = "sw1",
|
|
.type = EV_KEY,
|
|
.code = BTN_0,
|
|
.debounce_interval = GL_AR750_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = GL_AR750_GPIO_BTN_SW1,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct i2c_gpio_platform_data gl_ar750_i2c_gpio_data = {
|
|
.sda_pin = GL_AR750_GPIO_I2C_SDA,
|
|
.scl_pin = GL_AR750_GPIO_I2C_SCL,
|
|
};
|
|
|
|
static struct platform_device gl_ar750_i2c_gpio = {
|
|
.name = "i2c-gpio",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &gl_ar750_i2c_gpio_data,
|
|
},
|
|
};
|
|
|
|
static void __init gl_ar750_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1f050000);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_setup_ar933x_phy4_switch(false, false);
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
ath79_switch_data.phy4_mii_en = 1;
|
|
ath79_switch_data.phy_poll_mask = 0xfc;
|
|
|
|
/* WAN */
|
|
ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.phy_mask = BIT(4);
|
|
ath79_eth0_data.speed = SPEED_100;
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 0);
|
|
ath79_register_eth(0);
|
|
|
|
/* LAN */
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 1);
|
|
ath79_register_eth(1);
|
|
|
|
/* Disable JTAG (enables GPIO0-3) */
|
|
ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar750_leds_gpio),
|
|
gl_ar750_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(-1, GL_AR750_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(gl_ar750_gpio_keys),
|
|
gl_ar750_gpio_keys);
|
|
|
|
gpio_request_one(GL_AR750_GPIO_USB_POWER,
|
|
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
|
|
"USB power");
|
|
|
|
platform_device_register(&gl_ar750_i2c_gpio);
|
|
|
|
ath79_register_usb();
|
|
|
|
ath79_register_wmac(art + GL_AR750_WMAC2G_CALDATA_OFFSET, NULL);
|
|
|
|
ap91_pci_init(art + GL_AR750_WMAC5G_CALDATA_OFFSET, NULL);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_GL_AR750, "GL-AR750", "GL.iNet GL-AR750",
|
|
gl_ar750_setup);
|