openwrt/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts
Filip Milivojevic 168beef1dd
ramips: Cudy WR1300v2 fix mt7613 calibration data length
Since MT7613 is handled by MT7615 driver, and other devices using MT7615
have reg = <0x8000 0x4da8>; this needs updating or eeprom data fails to load.

Signed-off-by: Filip Milivojevic <zekica@gmail.com>
2023-11-08 17:16:18 +01:00

205 lines
3.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "cudy,wr1300-v2", "mediatek,mt7621-soc";
model = "Cudy WR1300 v2";
aliases {
led-boot = &led_sys;
led-failsafe = &led_sys;
led-running = &led_sys;
led-upgrade = &led_sys;
label-mac-device = &gmac0;
};
chosen {
bootargs = "console=ttyS0,115200";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_sys: sys {
label = "green:sys";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wps {
label = "green:wps";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
compatible = "nvmem-cells";
label = "factory";
reg = <0x40000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
read-only;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x4da8>;
};
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xf80000>;
};
partition@fd0000 {
label = "debug";
reg = <0xfd0000 0x10000>;
read-only;
};
partition@fe0000 {
label = "backup";
reg = <0xfe0000 0x10000>;
read-only;
};
bdinfo: partition@ff0000 {
compatible = "nvmem-cells";
label = "bdinfo";
reg = <0xff0000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
read-only;
macaddr_bdinfo_de00: macaddr@de00 {
reg = <0xde00 0x6>;
};
};
};
};
};
&pcie {
status = "okay";
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>, <&macaddr_bdinfo_de00>;
nvmem-cell-names = "eeprom", "mac-address";
};
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_8000>, <&macaddr_bdinfo_de00>;
nvmem-cell-names = "eeprom", "mac-address";
mac-address-increment = <2>;
};
};
&gmac0 {
nvmem-cells = <&macaddr_bdinfo_de00>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy4>;
nvmem-cells = <&macaddr_bdinfo_de00>;
nvmem-cell-names = "mac-address";
mac-address-increment = <1>;
};
&mdio {
ethphy4: ethernet-phy@4 {
reg = <4>;
};
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan4";
};
port@1 {
status = "okay";
label = "lan3";
};
port@2 {
status = "okay";
label = "lan2";
};
port@3 {
status = "okay";
label = "lan1";
};
};
};
&state_default {
gpio {
groups = "wdt", "i2c", "jtag";
function = "gpio";
};
};