openwrt/target/linux/ramips/dts/mt7620a_dlink_dir-806a-b1.dts
Mikhail Zhilkin 1cb85e1251
ramips: fix wrong permissions on dts files
This commit fixes wrong permissions on dts files. Before the commit these
dts files are executable:
   -rwxrwxr-x mt7620a_dlink_dir-806a-b1.dts
   -rwxrwxr-x mt7621_wavlink_wl-wn573hx1.dts

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
2023-11-02 20:42:53 +01:00

168 lines
2.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "dlink,dir-806a-b1", "ralink,mt7620a-soc";
model = "D-Link DIR-806A B1";
aliases {
led-boot = &wps_led;
led-failsafe = &wps_led;
led-running = &wps_led;
led-upgrade = &wps_led;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; // #12
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
wifi_led: 2.4g {
label = "green:wlan";
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WLAN;
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; // #72
};
wps_led: wps {
label = "green:wps";
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WPS;
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; // #39
};
};
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <48000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ALL";
reg = <0x0 0x800000>;
read-only;
};
partition@0_1 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
};
factory: partition@40000 {
compatible = "nvmem-cells";
label = "Factory";
reg = <0x40000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
read-only;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x200>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x200>;
};
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
macaddr_factory_8004: macaddr@8004 {
reg = <0x8004 0x6>;
};
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
&state_default {
gpio {
groups = "i2c", "uartf", "ephy";
function = "gpio";
};
};
&ethernet {
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
mac-address-increment = <(-2)>;
};
&wmac {
pinctrl-names = "default", "pa_gpio";
pinctrl-0 = <&pa_pins>;
pinctrl-1 = <&pa_gpio_pins>;
nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_4>;
nvmem-cell-names = "eeprom", "mac-address";
mac-address-increment = <(-1)>;
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
ieee80211-freq-limit = <5000000 6000000>;
nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_8004>;
nvmem-cell-names = "eeprom", "mac-address";
mac-address-increment = <(-3)>;
led {
led-active-low;
};
};
};