Mathias Kresin d3fd38637f lantiq: create ATM/PTM interfaces with dsl as netdev name ... Renaming an atm etherbride using 'ip link' (via hotplug) is racy since the original netdev might disappear before br2684ctl has finished appling it's setting: local2.notice br2684ctl[1667]: Interface "nas0" created sucessfully local2.notice br2684ctl[1667]: Communicating over ATM 0.8.35, encapsulation: LLC kern.info kernel: dsl0: renamed from nas0 kern.err kernel: br2684:br2684_regvcc: tried to attach to non-existent device local2.err br2684ctl[1667]: Could not configure interface:No such device or address By passing the final used netdev name to br2684ctl_wrap another race condition workaround will be enabled again. Change the lantiq ptm driver to create a netdev with the name dsl as well. Albeit the rename via 'ip link' works fine so far, using a different approach for ptm then atm could be confusing. Signed-off-by: Mathias Kresin <dev@kresin.me>		2018-01-10 08:08:53 +01:00
..
ase	lantiq: ase: enable USB and wireless	2017-10-04 20:08:15 +02:00
base-files	lantiq: create ATM/PTM interfaces with dsl as netdev name	2018-01-10 08:08:53 +01:00
dts	lantiq: fix dts compatible string	2017-12-29 22:32:26 +01:00
falcon	build: remove mips16 feature flag from target makefiles	2017-01-24 13:15:01 +01:00
files/firmware/lantiq	move GPHY FW blobs to non versioned folder	2013-03-14 18:42:21 +00:00
image	lantiq: fix wbmr-hp-g300h image metadata	2018-01-04 21:23:59 +01:00
patches-4.9	kernel: Update kernel 4.9 to 4.9.70	2017-12-19 22:45:27 +01:00
xrx200	lantiq: nand: drop ubifs images	2017-12-11 10:31:00 +01:00
xway	lantiq: nand: drop ubifs images	2017-12-11 10:31:00 +01:00
xway_legacy	lantiq: select PCI support in subtargets	2017-10-04 20:08:15 +02:00
config-4.9	lantiq: select PCI support in subtargets	2017-10-04 20:08:15 +02:00
Makefile	lantiq: switch to kernel 4.9	2017-09-05 08:43:39 +02:00
modules.mk	fix i2c-lantiq module	2012-12-16 10:03:18 +00:00