mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 17:01:14 +00:00
c3aa33bf70
This update doesn't include: 3b1e0a7bdfee brcmfmac: add support for SAE authentication offload be898fed355e brcmfmac: send port authorized event for FT-802.1X due to nl80211 dependencies. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
110 lines
3.8 KiB
Diff
110 lines
3.8 KiB
Diff
From e0ae4bac22effbd644add326f658a3aeeb8d45ee Mon Sep 17 00:00:00 2001
|
|
From: Adrian Ratiu <adrian.ratiu@collabora.com>
|
|
Date: Wed, 25 Sep 2019 16:44:58 +0300
|
|
Subject: [PATCH] brcmfmac: fix suspend/resume when power is cut off
|
|
|
|
brcmfmac assumed the wifi device always remains powered on and thus
|
|
hardcoded the MMC_PM_KEEP_POWER flag expecting the wifi device to
|
|
remain on even during suspend/resume cycles.
|
|
|
|
This is not always the case, some appliances cut power to everything
|
|
connected via SDIO for efficiency reasons and this leads to wifi not
|
|
being usable after coming out of suspend because the device was not
|
|
correctly reinitialized.
|
|
|
|
So we check for the keep_power capability and if it's not present then
|
|
we remove the device and probe it again during resume to mirror what's
|
|
happening in hardware and ensure correct reinitialization in the case
|
|
when MMC_PM_KEEP_POWER is not supported.
|
|
|
|
Suggested-by: Gustavo Padovan <gustavo.padovan@collabora.com>
|
|
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
|
|
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
---
|
|
.../broadcom/brcm80211/brcmfmac/bcmsdh.c | 53 ++++++++++++++-----
|
|
1 file changed, 39 insertions(+), 14 deletions(-)
|
|
|
|
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
|
|
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
|
|
@@ -1108,7 +1108,8 @@ static int brcmf_ops_sdio_suspend(struct
|
|
struct sdio_func *func;
|
|
struct brcmf_bus *bus_if;
|
|
struct brcmf_sdio_dev *sdiodev;
|
|
- mmc_pm_flag_t sdio_flags;
|
|
+ mmc_pm_flag_t pm_caps, sdio_flags;
|
|
+ int ret = 0;
|
|
|
|
func = container_of(dev, struct sdio_func, dev);
|
|
brcmf_dbg(SDIO, "Enter: F%d\n", func->num);
|
|
@@ -1119,19 +1120,33 @@ static int brcmf_ops_sdio_suspend(struct
|
|
bus_if = dev_get_drvdata(dev);
|
|
sdiodev = bus_if->bus_priv.sdio;
|
|
|
|
- brcmf_sdiod_freezer_on(sdiodev);
|
|
- brcmf_sdio_wd_timer(sdiodev->bus, 0);
|
|
+ pm_caps = sdio_get_host_pm_caps(func);
|
|
|
|
- sdio_flags = MMC_PM_KEEP_POWER;
|
|
- if (sdiodev->wowl_enabled) {
|
|
- if (sdiodev->settings->bus.sdio.oob_irq_supported)
|
|
- enable_irq_wake(sdiodev->settings->bus.sdio.oob_irq_nr);
|
|
- else
|
|
- sdio_flags |= MMC_PM_WAKE_SDIO_IRQ;
|
|
+ if (pm_caps & MMC_PM_KEEP_POWER) {
|
|
+ /* preserve card power during suspend */
|
|
+ brcmf_sdiod_freezer_on(sdiodev);
|
|
+ brcmf_sdio_wd_timer(sdiodev->bus, 0);
|
|
+
|
|
+ sdio_flags = MMC_PM_KEEP_POWER;
|
|
+ if (sdiodev->wowl_enabled) {
|
|
+ if (sdiodev->settings->bus.sdio.oob_irq_supported)
|
|
+ enable_irq_wake(sdiodev->settings->bus.sdio.oob_irq_nr);
|
|
+ else
|
|
+ sdio_flags |= MMC_PM_WAKE_SDIO_IRQ;
|
|
+ }
|
|
+
|
|
+ if (sdio_set_host_pm_flags(sdiodev->func1, sdio_flags))
|
|
+ brcmf_err("Failed to set pm_flags %x\n", sdio_flags);
|
|
+
|
|
+ } else {
|
|
+ /* power will be cut so remove device, probe again in resume */
|
|
+ brcmf_sdiod_intr_unregister(sdiodev);
|
|
+ ret = brcmf_sdiod_remove(sdiodev);
|
|
+ if (ret)
|
|
+ brcmf_err("Failed to remove device on suspend\n");
|
|
}
|
|
- if (sdio_set_host_pm_flags(sdiodev->func1, sdio_flags))
|
|
- brcmf_err("Failed to set pm_flags %x\n", sdio_flags);
|
|
- return 0;
|
|
+
|
|
+ return ret;
|
|
}
|
|
|
|
static int brcmf_ops_sdio_resume(struct device *dev)
|
|
@@ -1139,13 +1154,23 @@ static int brcmf_ops_sdio_resume(struct
|
|
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
|
|
struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
|
|
struct sdio_func *func = container_of(dev, struct sdio_func, dev);
|
|
+ mmc_pm_flag_t pm_caps = sdio_get_host_pm_caps(func);
|
|
+ int ret = 0;
|
|
|
|
brcmf_dbg(SDIO, "Enter: F%d\n", func->num);
|
|
if (func->num != 2)
|
|
return 0;
|
|
|
|
- brcmf_sdiod_freezer_off(sdiodev);
|
|
- return 0;
|
|
+ if (!(pm_caps & MMC_PM_KEEP_POWER)) {
|
|
+ /* bus was powered off and device removed, probe again */
|
|
+ ret = brcmf_sdiod_probe(sdiodev);
|
|
+ if (ret)
|
|
+ brcmf_err("Failed to probe device on resume\n");
|
|
+ } else {
|
|
+ brcmf_sdiod_freezer_off(sdiodev);
|
|
+ }
|
|
+
|
|
+ return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops brcmf_sdio_pm_ops = {
|