mirror of
https://github.com/openwrt/openwrt.git
synced 2025-03-24 13:05:59 +00:00
f6d81e2fa1
To share mdio addr for IntPHY and ExtPHY, as described in the documentation (MT7620_ProgrammingGuide.pdf). (refer: http://download.villagetelco.org/hardware/MT7620/MT7620_ProgrammingGuide.pdf) when port4 setup to work as gmac mode, dts like: &gsw { mediatek,port4 = "gmac"; }; we should set SYSCFG1.GE2_MODE==0x0 (RGMII). but SYSCFG1.GE2_MODE may have been set to 3(RJ-45) by uboot/default so we need to re-set it to 0x0 before this changes: gsw: 4FE + 2GE may not work correctly and MDIO addr 4 cannot be used by ExtPHY after this changes: gsw: 4FE + 2GE works and MDIO addr 4 can be used by ExtPHY Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org