mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
dbbba84ed4
Start 03x with 030 instead of 035. It's a trivial change that adds more
place for further backports in the 03x space.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit a5d6f2eb76)
270 lines
5.3 KiB
Diff
270 lines
5.3 KiB
Diff
From 2bebdfcdcd0feb58d5df419532a2cedc78a336d7 Mon Sep 17 00:00:00 2001
|
||
From: Vivek Unune <npcomplete13@gmail.com>
|
||
Date: Mon, 18 Jun 2018 13:41:59 -0400
|
||
Subject: [PATCH] ARM: dts: BCM5301X: Add support for Linksys EA9500
|
||
MIME-Version: 1.0
|
||
Content-Type: text/plain; charset=UTF-8
|
||
Content-Transfer-Encoding: 8bit
|
||
|
||
Hardware Info
|
||
-------------
|
||
|
||
Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
|
||
Switch - BCM53012 in BCM4709C0KFEBG & external BCM53125
|
||
DDR3 RAM - 256 MB
|
||
Flash - 128 MB (Toshiba TC58BVG0S3HTA00)
|
||
2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC
|
||
Power Amp - Skyworks SE2623L 2.4 GHz power amp (x4)
|
||
5GHz x 2 - BCM4366 4×4 2.4/5G single chip 802.11ac SoC
|
||
Power Amp - PLX Technology PEX8603 3-lane, 3-port PCIe switch
|
||
Ports - 8 Ports, 1 WAN Ports
|
||
Antennas - 8 Antennas
|
||
Serial Port - @J6 [GND,TX,RX] (VCC NC) 115200 8n1
|
||
|
||
Tested with OpenWrt built with DSA driver and Kernel v4.14
|
||
|
||
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
|
||
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
||
---
|
||
arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 229 ++++++++++++++++++++++++
|
||
1 file changed, 229 insertions(+)
|
||
|
||
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
|
||
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
|
||
@@ -31,6 +31,235 @@
|
||
linux,code = <KEY_WPS_BUTTON>;
|
||
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
||
};
|
||
+
|
||
+ rfkill {
|
||
+ label = "WiFi";
|
||
+ linux,code = <KEY_RFKILL>;
|
||
+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
|
||
+ };
|
||
+
|
||
+ reset {
|
||
+ label = "Reset";
|
||
+ linux,code = <KEY_RESTART>;
|
||
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
|
||
+ };
|
||
+ };
|
||
+
|
||
+ leds {
|
||
+ compatible = "gpio-leds";
|
||
+
|
||
+ wps {
|
||
+ label = "bcm53xx:white:wps";
|
||
+ gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
|
||
+ };
|
||
+
|
||
+ usb2 {
|
||
+ label = "bcm53xx:green:usb2";
|
||
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
|
||
+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
|
||
+ linux,default-trigger = "usbport";
|
||
+ };
|
||
+
|
||
+ usb3 {
|
||
+ label = "bcm53xx:green:usb3";
|
||
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
|
||
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
|
||
+ <&xhci_port1>;
|
||
+ linux,default-trigger = "usbport";
|
||
+ };
|
||
+
|
||
+ power {
|
||
+ label = "bcm53xx:white:power";
|
||
+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
|
||
+ };
|
||
+
|
||
+ wifi-disabled {
|
||
+ label = "bcm53xx:amber:wifi-disabled";
|
||
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
|
||
+ };
|
||
+
|
||
+ wifi-enabled {
|
||
+ label = "bcm53xx:white:wifi-enabled";
|
||
+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
|
||
+ };
|
||
+
|
||
+ bluebar1 {
|
||
+ label = "bcm53xx:white:bluebar1";
|
||
+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
|
||
+ };
|
||
+
|
||
+ bluebar2 {
|
||
+ label = "bcm53xx:white:bluebar2";
|
||
+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
|
||
+ };
|
||
+
|
||
+ bluebar3 {
|
||
+ label = "bcm53xx:white:bluebar3";
|
||
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
|
||
+ };
|
||
+
|
||
+ bluebar4 {
|
||
+ label = "bcm53xx:white:bluebar4";
|
||
+ gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
|
||
+ };
|
||
+
|
||
+ bluebar5 {
|
||
+ label = "bcm53xx:white:bluebar5";
|
||
+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
|
||
+ };
|
||
+
|
||
+ bluebar6 {
|
||
+ label = "bcm53xx:white:bluebar6";
|
||
+ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
|
||
+ };
|
||
+
|
||
+ bluebar7 {
|
||
+ label = "bcm53xx:white:bluebar7";
|
||
+ gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
|
||
+ };
|
||
+
|
||
+ bluebar8 {
|
||
+ label = "bcm53xx:white:bluebar8";
|
||
+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
|
||
+ };
|
||
+ };
|
||
+
|
||
+ mdio-bus-mux {
|
||
+ /* BIT(9) = 1 => external mdio */
|
||
+ mdio_ext: mdio@200 {
|
||
+ reg = <0x200>;
|
||
+ #address-cells = <1>;
|
||
+ #size-cells = <0>;
|
||
+ };
|
||
+ };
|
||
+
|
||
+ mdio-mii-mux {
|
||
+ compatible = "mdio-mux-mmioreg";
|
||
+ mdio-parent-bus = <&mdio_ext>;
|
||
+ #address-cells = <1>;
|
||
+ #size-cells = <0>;
|
||
+ reg = <0x1800c1c0 0x4>;
|
||
+
|
||
+ /* BIT(6) = mdc, BIT(7) = mdio */
|
||
+ mux-mask = <0xc0>;
|
||
+
|
||
+ mdio-mii@0 {
|
||
+ /* Enable MII function */
|
||
+ reg = <0x0>;
|
||
+ #address-cells = <1>;
|
||
+ #size-cells = <0>;
|
||
+
|
||
+ switch@0 {
|
||
+ compatible = "brcm,bcm53125";
|
||
+ #address-cells = <1>;
|
||
+ #size-cells = <0>;
|
||
+ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
|
||
+ reset-names = "robo_reset";
|
||
+ reg = <0>;
|
||
+ dsa,member = <1 0>;
|
||
+
|
||
+ ports {
|
||
+ #address-cells = <1>;
|
||
+ #size-cells = <0>;
|
||
+
|
||
+ port@0 {
|
||
+ reg = <0>;
|
||
+ label = "lan1";
|
||
+ };
|
||
+
|
||
+ port@1 {
|
||
+ reg = <1>;
|
||
+ label = "lan5";
|
||
+ };
|
||
+
|
||
+ port@2 {
|
||
+ reg = <2>;
|
||
+ label = "lan2";
|
||
+ };
|
||
+
|
||
+ port@3 {
|
||
+ reg = <3>;
|
||
+ label = "lan6";
|
||
+ };
|
||
+
|
||
+ port@4 {
|
||
+ reg = <4>;
|
||
+ label = "lan3";
|
||
+ };
|
||
+
|
||
+ sw1_p8: port@8 {
|
||
+ reg = <8>;
|
||
+ ethernet = <&sw0_p0>;
|
||
+ label = "cpu";
|
||
+
|
||
+ fixed-link {
|
||
+ speed = <1000>;
|
||
+ full-duplex;
|
||
+ };
|
||
+ };
|
||
+ };
|
||
+ };
|
||
+ };
|
||
+ };
|
||
+};
|
||
+
|
||
+&usb2 {
|
||
+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
|
||
+};
|
||
+
|
||
+&usb3 {
|
||
+ vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
|
||
+};
|
||
+
|
||
+&srab {
|
||
+ compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
|
||
+ status = "okay";
|
||
+ dsa,member = <0 0>;
|
||
+
|
||
+ ports {
|
||
+ #address-cells = <1>;
|
||
+ #size-cells = <0>;
|
||
+
|
||
+ port@1 {
|
||
+ reg = <1>;
|
||
+ label = "lan7";
|
||
+ };
|
||
+
|
||
+ port@2 {
|
||
+ reg = <2>;
|
||
+ label = "lan4";
|
||
+ };
|
||
+
|
||
+ port@3 {
|
||
+ reg = <3>;
|
||
+ label = "lan8";
|
||
+ };
|
||
+
|
||
+ port@4 {
|
||
+ reg = <4>;
|
||
+ label = "wan";
|
||
+ };
|
||
+
|
||
+ port@8 {
|
||
+ reg = <8>;
|
||
+ ethernet = <&gmac2>;
|
||
+ label = "cpu";
|
||
+
|
||
+ fixed-link {
|
||
+ speed = <1000>;
|
||
+ full-duplex;
|
||
+ };
|
||
+ };
|
||
+
|
||
+ sw0_p0: port@0 {
|
||
+ reg = <0>;
|
||
+ label = "extsw";
|
||
+
|
||
+ fixed-link {
|
||
+ speed = <1000>;
|
||
+ full-duplex;
|
||
+ };
|
||
+ };
|
||
};
|
||
};
|
||
|