openwrt/package
Alberto Bursi f5d267df63 uboot-kirkwood: add uboot for pogoplug v4
add an uboot able to boot a kernel in an ubi partition

This uboot also has a "recovery" feature, before
booting from flash it will try to boot a initramfs
image called "initramfs.bin" from a FAT32-formatted
USB drive connected to the USB 2.0 port.
(u-boot lacks drivers for usb 3.0 controllers)

Just rename the initramfs image and place it on
the usb drive, the uboot will load it.

In case there is no USB drive or no such file
is found, the uboot will boot from internal flash.

The whole check takes less than a second, boot times
are not impacted.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2018-01-09 22:06:55 +01:00
..
base-files base-files: gpio switch: set output value with direction 2018-01-09 22:05:46 +01:00
boot uboot-kirkwood: add uboot for pogoplug v4 2018-01-09 22:06:55 +01:00
devel strace: Update to 4.20 2017-12-07 11:46:37 +08:00
firmware layerscape: add byte_swap.py script for ls-rcw package 2017-12-26 23:30:59 +01:00
kernel kernel: fix packaging of kmod-gpio-nxp-74hc164 2018-01-07 12:33:47 +01:00
libs libubox: fix package bump 2018-01-07 16:34:29 +01:00
network lantiq: activate noise margin delta for VDSL too 2018-01-07 23:42:54 +01:00
system Revert "fstools: update to latest git HEAD" 2018-01-07 13:42:46 +01:00
utils lua: clean up patch fuzz 2018-01-05 10:42:34 +01:00
Makefile build: cleanup tmp/ dir of target rootfs 2017-05-02 22:10:50 +08:00