mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
a461f984c4
Add Nokia GPON ONT SFP fix for tx_fault in net-next. Signed-off-by: Scott Roberts <ttocsr@gmail.com>
95 lines
2.7 KiB
Diff
95 lines
2.7 KiB
Diff
From 6df6709dc3d00e0bc948d45dfa8d8f18ba379c48 Mon Sep 17 00:00:00 2001
|
|
From: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Date: Tue, 5 Nov 2019 11:56:18 +0000
|
|
Subject: [PATCH 656/660] net: sfp: add support for Clause 45 PHYs
|
|
|
|
Some SFP+ modules have a Clause 45 PHY onboard, which is accessible via
|
|
the normal I2C address. Detect 10G BASE-T PHYs which may have an
|
|
accessible PHY and probe for it.
|
|
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
---
|
|
drivers/net/phy/sfp.c | 44 +++++++++++++++++++++++++++++++++++++++----
|
|
1 file changed, 40 insertions(+), 4 deletions(-)
|
|
|
|
--- a/drivers/net/phy/sfp.c
|
|
+++ b/drivers/net/phy/sfp.c
|
|
@@ -1337,12 +1337,12 @@ static void sfp_sm_phy_detach(struct sfp
|
|
sfp->mod_phy = NULL;
|
|
}
|
|
|
|
-static void sfp_sm_probe_phy(struct sfp *sfp)
|
|
+static void sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
|
|
{
|
|
struct phy_device *phy;
|
|
int err;
|
|
|
|
- phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
|
|
+ phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
|
|
if (phy == ERR_PTR(-ENODEV)) {
|
|
dev_info(sfp->dev, "no PHY detected\n");
|
|
return;
|
|
@@ -1352,6 +1352,13 @@ static void sfp_sm_probe_phy(struct sfp
|
|
return;
|
|
}
|
|
|
|
+ err = phy_device_register(phy);
|
|
+ if (err) {
|
|
+ phy_device_free(phy);
|
|
+ dev_err(sfp->dev, "phy_device_register failed: %d\n", err);
|
|
+ return;
|
|
+ }
|
|
+
|
|
err = sfp_add_phy(sfp->sfp_bus, phy);
|
|
if (err) {
|
|
phy_device_remove(phy);
|
|
@@ -1422,10 +1429,32 @@ static void sfp_sm_fault(struct sfp *sfp
|
|
}
|
|
}
|
|
|
|
+/* Probe a SFP for a PHY device if the module supports copper - the PHY
|
|
+ * normally sits at I2C bus address 0x56, and may either be a clause 22
|
|
+ * or clause 45 PHY.
|
|
+ *
|
|
+ * Clause 22 copper SFP modules normally operate in Cisco SGMII mode with
|
|
+ * negotiation enabled, but some may be in 1000base-X - which is for the
|
|
+ * PHY driver to determine.
|
|
+ *
|
|
+ * Clause 45 copper SFP+ modules (10G) appear to switch their interface
|
|
+ * mode according to the negotiated line speed.
|
|
+ */
|
|
static void sfp_sm_probe_for_phy(struct sfp *sfp)
|
|
{
|
|
- if (sfp->id.base.e1000_base_t)
|
|
- sfp_sm_probe_phy(sfp);
|
|
+ switch (sfp->id.base.extended_cc) {
|
|
+ case SFF8024_ECC_10GBASE_T_SFI:
|
|
+ case SFF8024_ECC_10GBASE_T_SR:
|
|
+ case SFF8024_ECC_5GBASE_T:
|
|
+ case SFF8024_ECC_2_5GBASE_T:
|
|
+ sfp_sm_probe_phy(sfp, true);
|
|
+ break;
|
|
+
|
|
+ default:
|
|
+ if (sfp->id.base.e1000_base_t)
|
|
+ sfp_sm_probe_phy(sfp, false);
|
|
+ break;
|
|
+ }
|
|
}
|
|
|
|
static int sfp_module_parse_power(struct sfp *sfp)
|
|
@@ -1485,6 +1514,13 @@ static int sfp_sm_mod_hpower(struct sfp
|
|
return -EAGAIN;
|
|
}
|
|
|
|
+ /* DM7052 reports as a high power module, responds to reads (with
|
|
+ * all bytes 0xff) at 0x51 but does not accept writes. In any case,
|
|
+ * if the bit is already set, we're already in high power mode.
|
|
+ */
|
|
+ if (!!(val & BIT(0)) == enable)
|
|
+ return 0;
|
|
+
|
|
if (enable)
|
|
val |= BIT(0);
|
|
else
|