openwrt/target/linux/ramips/dts/mt7621_zyxel_wsm20.dts
Shiji Yang 9ac891f8c4
ramips: convert MT7915 EEPROM to NVMEM format
This patch converts MT7915 WiFi calibration data to NVMEM format. The
EEPROM size is 0xe00.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-09 11:15:52 +02:00

236 lines
3.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "zyxel,wsm20", "mediatek,mt7621-soc";
model = "ZyXEL WSM20";
aliases {
led-boot = &led_system_white;
led-failsafe = &led_system_red;
led-running = &led_system_white;
led-upgrade = &led_system_red;
label-mac-device = &gmac0;
};
chosen {
bootargs-override = "console=ttyS0,115200n1";
};
leds {
compatible = "gpio-leds";
led_system_white: led-0 {
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
label = "white:system";
};
led_system_red: led-1 {
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
label = "red:system";
};
led-2 {
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
label = "green:led1";
};
led-3 {
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
label = "white:led2";
};
led-4 {
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
label = "green:led3";
};
led-5 {
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
label = "red:led4";
};
led-6 {
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
label = "white:led5";
};
};
keys {
compatible = "gpio-keys";
led {
label = "led";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LIGHTS_TOGGLE>;
};
reset {
label = "reset";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x100000>;
label = "Bootloader";
read-only;
};
partition@100000 {
reg = <0x100000 0x100000>;
label = "Config";
};
factory: partition@200000 {
compatible = "nvmem-cells";
reg = <0x200000 0x1c0000>;
#address-cells = <1>;
#size-cells = <1>;
label = "Factory";
read-only;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0xe00>;
};
macaddr_factory_1fdfa: macaddr@1fdfa {
reg = <0x1fdfa 0x6>;
};
macaddr_factory_1fdf4: macaddr@1fdf4 {
reg = <0x1fdf4 0x6>;
};
};
partition@3c0000 {
reg = <0x3c0000 0x2800000>;
label = "firmware";
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x800000>;
};
partition@800000 {
label = "ubi";
reg = <0x800000 0x2000000>;
};
};
partition@2bc0000 {
reg = <0x2bc0000 0x2800000>;
label = "Kernel2";
};
partition@53c0000 {
reg = <0x53c0000 0x100000>;
label = "persist";
};
partition@54c0000 {
reg = <0x54c0000 0x400000>;
label = "rootfs_data";
read-only;
};
partition@58C0000 {
reg = <0x58c0000 0x25c0000>;
label = "app";
read-only;
};
partition@7e80000 {
reg = <0x7e80000 0x100000>;
label = "crt";
read-only;
};
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_1fdfa>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy0>;
nvmem-cells = <&macaddr_factory_1fdf4>;
nvmem-cell-names = "mac-address";
};
&mdio {
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&pcie {
status = "okay";
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
mediatek,disable-radar-background;
};
};
&pcie2 {
status = "disabled";
};
&switch0 {
ports {
port@1 {
status = "okay";
label = "lan3";
};
port@2 {
status = "okay";
label = "lan2";
};
port@3 {
status = "okay";
label = "lan1";
};
};
};
&state_default {
gpio {
groups = "i2c", "uart3", "jtag", "wdt";
function = "gpio";
};
};