mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
f25cd55bd1
Netgear WAX214v2 is an 802.11ax (Wi-Fi 6) wireless access point. Specifications: * SoC: MediaTek MT7621AT * RAM: 512 MiB * Flash: NAND 128 MiB (ESMT PSU1GA30DT) * Wi-Fi: 2.4/5 GHz 4T4R (MediaTek MT7915E) * Ethernet: 1x 10/100/1000 Mbps LAN * Switch: MediaTek MT7530 (SoC built-in) * LEDs/Keys * Power (green, blue, amber) * LAN (green, amber) * WLAN 2.4GHz (green, blue) * WLAN 5GHz (green, blue) * Reset button * USB: None * UART: Marked J1 on board, 115200 8N1 * Power * 12 VDC, 1.5 A * IEEE 802.3at (PoE+) Load addresses (same as Netgear WAX202): * stock * 0x80010000: FIT image * 0x81001000: kernel image -> entry * OpenWrt * 0x80010000: FIT image * 0x82000000: uncompressed kernel+relocate image * 0x80001000: relocated kernel image -> entry MAC addresses as verified by OEM firmware: vendor OpenWrt address eth0 lan label ra0 phy0 label + 2 rax0 phy1 label + 3 Installation: * Flash the factory image by TFTP to the bootloader. NMRP can be used to TFTP without opening the case. Revert to stock firmware: * Flash the stock firmware to the bootloader using TFTP/NMRP. References to WAX214v2 GPL source: https://www.downloads.netgear.com/files/GPL/WAX214v2-V1.0.1.5-gpl-src.tar.gz * openwrt/target/linux/ramips/dts/mt7621-ax-nand-wax214v2.dts DTS file for this device. Signed-off-by: Borys Zhukov <borys@zhukov.org> Link: https://github.com/openwrt/openwrt/pull/14401 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
229 lines
3.8 KiB
Plaintext
229 lines
3.8 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "mt7621.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
compatible = "netgear,wax214v2", "mediatek,mt7621-soc";
|
|
model = "Netgear WAX214v2";
|
|
|
|
aliases {
|
|
led-boot = &led_power_green;
|
|
led-failsafe = &led_power_amber;
|
|
led-running = &led_power_green;
|
|
led-upgrade = &led_power_blue;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200";
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_power_green: power_green {
|
|
function = LED_FUNCTION_POWER;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led_power_blue: power_blue {
|
|
function = LED_FUNCTION_POWER;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led_power_amber: power_amber {
|
|
function = LED_FUNCTION_POWER;
|
|
color = <LED_COLOR_ID_AMBER>;
|
|
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wifin_green {
|
|
function = LED_FUNCTION_WLAN_2GHZ;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "phy0radio";
|
|
};
|
|
|
|
wifia_green {
|
|
function = LED_FUNCTION_WLAN_5GHZ;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "phy1radio";
|
|
};
|
|
};
|
|
};
|
|
|
|
&nand {
|
|
status = "okay";
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "Bootloader";
|
|
reg = <0x0 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@80000 {
|
|
label = "Config";
|
|
reg = <0x80000 0x80000>;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "Factory";
|
|
reg = <0x100000 0x80000>;
|
|
read-only;
|
|
|
|
nvmem-layout {
|
|
compatible = "fixed-layout";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
eeprom_factory_0: eeprom@0 {
|
|
reg = <0x0 0xe00>;
|
|
};
|
|
|
|
precal_factory_e10: precal@e10 {
|
|
reg = <0xe10 0x19c10>;
|
|
};
|
|
};
|
|
};
|
|
|
|
partition@180000 {
|
|
label = "firmware";
|
|
reg = <0x180000 0x2600000>;
|
|
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "kernel";
|
|
reg = <0x0 0x400000>;
|
|
};
|
|
|
|
partition@400000 {
|
|
label = "ubi";
|
|
reg = <0x400000 0x2200000>;
|
|
};
|
|
};
|
|
|
|
partition@2780000 {
|
|
label = "firmware_backup";
|
|
reg = <0x2780000 0x2600000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@4d80000 {
|
|
label = "CFG";
|
|
reg = <0x4d80000 0x800000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@5580000 {
|
|
label = "RAE";
|
|
reg = <0x5580000 0x400000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@5980000 {
|
|
label = "POT";
|
|
reg = <0x5980000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@5a80000 {
|
|
label = "Language";
|
|
reg = <0x5a80000 0x400000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@5e80000 {
|
|
label = "Traffic";
|
|
reg = <0x5e80000 0x200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@6080000 {
|
|
label = "Cert";
|
|
reg = <0x6080000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@6180000 {
|
|
label = "NTGRcryptK";
|
|
reg = <0x6180000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@6280000 {
|
|
label = "NTGRcryptD";
|
|
reg = <0x6280000 0x500000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@6780000 {
|
|
label = "LOG";
|
|
reg = <0x6780000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@6880000 {
|
|
label = "User_data";
|
|
reg = <0x6880000 0x640000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie1 {
|
|
wifi@0,0 {
|
|
compatible = "mediatek,mt76";
|
|
reg = <0x0000 0 0 0 0>;
|
|
nvmem-cells = <&eeprom_factory_0>, <&precal_factory_e10>;
|
|
nvmem-cell-names = "eeprom", "precal";
|
|
};
|
|
};
|
|
|
|
&state_default {
|
|
gpio {
|
|
groups = "uart3", "uart2", "jtag";
|
|
function = "gpio";
|
|
};
|
|
};
|
|
|
|
&switch0 {
|
|
ports {
|
|
port@0 {
|
|
status = "okay";
|
|
label = "lan";
|
|
};
|
|
};
|
|
};
|
|
|
|
&xhci {
|
|
status = "disabled";
|
|
};
|