mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 01:59:02 +00:00
f7c732bf9e
Radxa E25 is a network application carrier board for the Radxa CM3 Industrial (CM3I) SoM, which is based on the Rockchip RK3568 SoC. It has the following features: - MicroSD card socket, on board eMMC flash - 2x 2.5GbE Realtek RTL8125B Ethernet transceiver - 1x USB Type-C port (Power and Serial console) - 1x USB 3.0 OTG port - mini PCIe socket (USB or PCIe) - ngff PCIe socket (USB or SATA) - 1x User LED and 16x RGB LEDs - 26-pin expansion header Installation: Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
80 lines
2.5 KiB
Diff
80 lines
2.5 KiB
Diff
From a87852e37f782257ebc57cc44a0d3fbf806471f6 Mon Sep 17 00:00:00 2001
|
|
From: Jonas Karlman <jonas@kwiboo.se>
|
|
Date: Mon, 24 Jul 2023 14:52:16 +0000
|
|
Subject: [PATCH] arm64: dts: rockchip: Fix PCIe regulators on Radxa E25
|
|
|
|
Despite its name, the regulator vcc3v3_pcie30x1 has nothing to do with
|
|
pcie30x1. Instead, it supply power to VBAT1-5 on the M.2 KEY B port as
|
|
seen on page 8 of the schematic [1].
|
|
|
|
pcie30x1 is used for the mini PCIe slot, and as seen on page 9 the
|
|
vcc3v3_minipcie regulator is instead related to pcie30x1.
|
|
|
|
The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives.
|
|
|
|
Use correct regulator vcc3v3_minipcie for pcie30x1.
|
|
|
|
[1] https://dl.radxa.com/cm3p/e25/radxa-e25-v1.4-sch.pdf
|
|
|
|
Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
|
|
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
|
|
Link: https://lore.kernel.org/r/20230724145213.3833099-1-jonas@kwiboo.se
|
|
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
---
|
|
.../arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 16 ++++++++--------
|
|
1 file changed, 8 insertions(+), 8 deletions(-)
|
|
|
|
--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
|
|
@@ -47,6 +47,9 @@
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
+ /* actually fed by vcc5v0_sys, dependent
|
|
+ * on pi6c clock generator
|
|
+ */
|
|
vcc3v3_minipcie: vcc3v3-minipcie-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
@@ -54,9 +57,9 @@
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&minipcie_enable_h>;
|
|
regulator-name = "vcc3v3_minipcie";
|
|
- regulator-min-microvolt = <5000000>;
|
|
- regulator-max-microvolt = <5000000>;
|
|
- vin-supply = <&vcc5v0_sys>;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ vin-supply = <&vcc3v3_pi6c_05>;
|
|
};
|
|
|
|
vcc3v3_ngff: vcc3v3-ngff-regulator {
|
|
@@ -71,9 +74,6 @@
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
- /* actually fed by vcc5v0_sys, dependent
|
|
- * on pi6c clock generator
|
|
- */
|
|
vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
@@ -83,7 +83,7 @@
|
|
regulator-name = "vcc3v3_pcie30x1";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
- vin-supply = <&vcc3v3_pi6c_05>;
|
|
+ vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
|
|
@@ -117,7 +117,7 @@
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie30x1m0_pins>;
|
|
reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
|
|
- vpcie3v3-supply = <&vcc3v3_pcie30x1>;
|
|
+ vpcie3v3-supply = <&vcc3v3_minipcie>;
|
|
status = "okay";
|
|
};
|
|
|