Sander Vanheule f4065485d3 realtek: add missing gpio0 pinctrl properties ... Not all devices using the gpio0/sys-led pin as a GPIO, configure the pinmux. Add the necessary pinctrl properties to these devices to ensure the pin is set up for use as GPIO. Co-developed-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Bjørn Mork <bjorn@mork.no>		2022-07-10 09:54:35 +02:00
..
rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi	realtek: add support for Panasonic Switch-M8eG PN28080K	2022-03-13 19:54:57 +01:00
rtl838x.dtsi	realtek: move RTL8231 definitions to board files	2022-02-20 16:23:55 +00:00
rtl839x.dtsi	realtek: fix node addresses for RTL839x	2022-02-20 16:23:55 +00:00
rtl930x.dtsi	realtek: use DT provided address for timers	2022-02-20 16:23:58 +00:00
rtl931x.dtsi	realtek: consolidate bootargs again	2022-02-20 16:23:55 +00:00
rtl8380_engenius_ews2910p.dts	realtek: EnGenius EWS2910P: declare and hog the poe-enable GPIO	2022-07-02 11:50:47 +02:00
rtl8380_netgear_gigabit_1xx.dtsi	realtek: make Netgear GS1xx u-boot env partition writable	2022-06-22 17:51:02 +02:00
rtl8380_netgear_gigabit_3xx.dtsi	realtek: make "u-boot-env" partition writable for Netgear 3xx series	2022-06-22 17:52:30 +02:00
rtl8380_netgear_gigabit.dtsi	realtek: add missing gpio0 pinctrl properties	2022-07-10 09:54:35 +02:00
rtl8380_netgear_gs108t-v3.dts	realtek: add support for power LED on Netgear GS108Tv3	2022-06-19 10:58:40 +02:00
rtl8380_netgear_gs110tpp-v1.dts	realtek: netgear-gs110tpp: Add system LEDs	2021-12-27 13:51:41 +01:00
rtl8380_netgear_gs308t-v1.dts	realtek: add support for power LED on Netgear GS308Tv1	2022-06-18 09:21:50 +02:00
rtl8380_netgear_gs310tp-v1.dts	realtek: enable uart1 on the devices with PoE support in 5.10	2021-09-26 00:32:18 +02:00
rtl8380_panasonic_m8eg-pn28080k.dts	realtek: add support for Panasonic Switch-M8eG PN28080K	2022-03-13 19:54:57 +01:00
rtl8380_zyxel_gs1900-8.dts	realtek: copy dts directory for Kernel 5.10	2021-09-26 00:32:17 +02:00
rtl8380_zyxel_gs1900-8hp-v1.dts	realtek: enable uart1 on the devices with PoE support in 5.10	2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900-8hp-v2.dts	realtek: enable uart1 on the devices with PoE support in 5.10	2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900-10hp.dts	realtek: enable uart1 on the devices with PoE support in 5.10	2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900.dtsi	realtek: move RTL8231 definitions to board files	2022-02-20 16:23:55 +00:00
rtl8382_allnet_all-sg8208m.dts	realtek: Consolidate bootargs	2021-11-24 21:42:44 +02:00
rtl8382_d-link_dgs-1210-10p.dts	realtek: move RTL8231 definitions to board files	2022-02-20 16:23:55 +00:00
rtl8382_d-link_dgs-1210-16.dts	realtek: copy dts directory for Kernel 5.10	2021-09-26 00:32:17 +02:00
rtl8382_d-link_dgs-1210-20.dts	realtek: add support for D-Link DGS-1210-20	2022-06-19 08:36:21 +02:00
rtl8382_d-link_dgs-1210-28.dts	realtek: add gpio-restart for D-Link DGS-1210-28	2022-06-07 17:11:28 +02:00
rtl8382_d-link_dgs-1210.dtsi	realtek: add missing gpio0 pinctrl properties	2022-07-10 09:54:35 +02:00
rtl8382_inaba_aml2-17gp.dts	realtek: add missing gpio0 pinctrl properties	2022-07-10 09:54:35 +02:00
rtl8382_iodata_bsh-g24mb.dts	realtek: add support for I-O DATA BSH-G24MB	2022-03-07 21:44:53 +01:00
rtl8382_zyxel_gs1900-16.dts	realtek: add support for ZyXEL GS1900-16	2022-05-07 17:23:45 +02:00
rtl8382_zyxel_gs1900-24-v1.dts	realtek: add ZyXEL GS1900-24 v1 support	2022-03-13 19:24:13 +01:00
rtl8382_zyxel_gs1900-24e.dts	realtek: add support for ZyXEL GS1900-24E	2022-06-06 10:30:50 +02:00
rtl8382_zyxel_gs1900-24hp-v1.dts	realtek: add ZyXEL GS1900-24HP v1 support	2022-04-16 17:26:56 +02:00
rtl8382_zyxel_gs1900-24hp-v2.dts	realtek: enable uart1 on the devices with PoE support in 5.10	2021-09-26 00:32:18 +02:00
rtl8393_zyxel_gs1900-48.dts	realtek: ZyXEL GS1900-48: fix system LED polarity	2022-02-20 16:23:55 +00:00
rtl9302_zyxel_xgs1250-12.dts	realtek: consolidate bootargs again	2022-02-20 16:23:55 +00:00