mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-14 06:32:11 +00:00
d2c3131b3f
Zyxel NSA310S is a NAS based on Marvell kirkwood SoC. Specification: - Processor Marvell 88F6702 1 GHz - 256MB RAM - 128MB NAND - 1x GBE LAN port (PHY: Marvell 88E1318) - 2x USB 2.0 - 1x SATA - 3x button - 7x leds - serial on J1 connector (115200 8N1) (GND-NOPIN-RX-TX-VCC) Known issues: - no kernel module for RTC. [*] - buzzer (connected to MPP43) need to be drived by 1kHz signal - no kernel module for internal MCU connected via I2C[**] [*] Karoly Pocsi made simple, unofficial driver for HT1382. It can be found here: https://www.madadmin.com/zyxel-nsa320s-es-debian-linux-4-resz/ [**] Karoly Pocsi found how CPU talk with MCU: It is possible to query the MCU-controlled fan speed and temperature: i2cget -y 0x0 0x0a 0x07 i2cget -y 0x0 0x0a 0x08 The first value (0x07) is the temperature in ° C, the second (0x08) is the time in milliseconds to complete one fan revolution (rpm = 60,000 / value). Info translated from: https://www.madadmin.com/zyxel-nsa320s-es-debian-linux-4-resz/ Installation: TFTP: 1. Run serial console and go to u-boot. 2. Copy u-boot via tftp and write to NAND: => mw 0x0800000 0xffff 0x100000 => nand erase 0x0 100000 => setenv ipaddr 192.168.1.2 => setenv serverip 192.168.1.4 => tftp 0x0800000 nsa310s-u-boot.kwb => nand write 0x0800000 0x0 0x100000 => reset 3. Run new u-Boot, repair bootcmd and restore MAC address from sticker => setenv ethaddr AA:BB:CC:DD:EE:FF => saveenv 4. Copy and run initramfs image => setenv ipaddr 192.168.1.2 => setenv serverip 192.168.1.4 => tftpboot zyxel_nsa310s-initramfs-uImage => bootm 0x800000 5. Download sysupgrade image and perform sysupgrade USB: 1. Prepare usb fat32 drive with u-boot.kwb and initramfs image. Stick it to USB 2.0 port. 2. Run serial console and go to u-boot. 3. Copy u-boot from usb and write to NAND: => mw 0x0800000 0xffff 0x100000 => nand erase 0x0 100000 => usb start => fatload usb 0 0x0800000 u-boot.kwb => nand write 0x0800000 0x0 0x100000 => reset 4. Run new u-Boot, repair bootcmd and restore MAC address from sticker => setenv ethaddr AA:BB:CC:DD:EE:FF => saveenv 5. Copy and run initramfs image: => usb start => fatload usb 0 0x0800000 initramfs-uImage => bootm 0x800000 6. Download sysupgrade image and perform sysupgrade. Based on work ThBexx <thomas.beckler@hotmail.com> DTS based on dropped support in 0ebdf0c. Tested-by: Lech Perczak <lech.perczak@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [NSA310s -> NSA310S in DEVICE_MODEL] Signed-off-by: Petr Štetiar <ynezz@true.cz>
170 lines
4.5 KiB
Makefile
170 lines
4.5 KiB
Makefile
#
|
|
# Copyright (C) 2009-2013 OpenWrt.org
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
KERNEL_LOADADDR:=0x8000
|
|
|
|
define Device/Default
|
|
PROFILES := Default
|
|
DEVICE_DTS = $$(if $$(BOARD_NAME),kirkwood-$$(BOARD_NAME),)
|
|
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
|
|
KERNEL := kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL_IN_UBI := 1
|
|
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 512
|
|
BLOCKSIZE := 128k
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-ubi
|
|
SUPPORTED_DEVICES = $(subst _,$(comma),$(1)) $$(BOARD_NAME)
|
|
endef
|
|
|
|
define Device/cisco_on100
|
|
DEVICE_VENDOR := Cisco Systems
|
|
DEVICE_MODEL := ON100
|
|
KERNEL_SIZE := 5376k
|
|
KERNEL_IN_UBI :=
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
|
BOARD_NAME := on100
|
|
DEVICE_PACKAGES := kmod-mvsdio
|
|
endef
|
|
TARGET_DEVICES += cisco_on100
|
|
|
|
define Device/cloudengines_pogoe02
|
|
DEVICE_VENDOR := Cloud Engines
|
|
DEVICE_MODEL := Pogoplug E02
|
|
BOARD_NAME := pogo_e02
|
|
endef
|
|
TARGET_DEVICES += cloudengines_pogoe02
|
|
|
|
define Device/cloudengines_pogoplugv4
|
|
DEVICE_VENDOR := Cloud Engines
|
|
DEVICE_MODEL := Pogoplug V4
|
|
DEVICE_DTS := kirkwood-pogoplug-series-4
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-mvsdio kmod-usb3 \
|
|
kmod-gpio-button-hotplug
|
|
endef
|
|
TARGET_DEVICES += cloudengines_pogoplugv4
|
|
|
|
define Device/iom_iconnect-1.1
|
|
DEVICE_VENDOR := Iomega
|
|
DEVICE_MODEL := Iconnect
|
|
BOARD_NAME := iconnect
|
|
endef
|
|
TARGET_DEVICES += iom_iconnect-1.1
|
|
|
|
define Device/iom_ix2-200
|
|
DEVICE_VENDOR := Iomega
|
|
DEVICE_MODEL := StorCenter ix2-200
|
|
DEVICE_DTS := kirkwood-iomega_ix2_200
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
|
|
kmod-gpio-button-hotplug kmod-hwmon-lm63
|
|
PAGESIZE := 512
|
|
SUBPAGESIZE := 256
|
|
BLOCKSIZE := 16k
|
|
KERNEL_SIZE := 3072k
|
|
KERNEL_IN_UBI :=
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGE_SIZE := 31744k
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
endef
|
|
TARGET_DEVICES += iom_ix2-200
|
|
|
|
define Device/linksys_audi
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA3500 (Audi)
|
|
DEVICE_PACKAGES := kmod-mwl8k wpad-basic kmod-gpio-button-hotplug
|
|
PAGESIZE := 512
|
|
SUBPAGESIZE := 256
|
|
BLOCKSIZE := 16k
|
|
KERNEL_SIZE := 2624k
|
|
KERNEL_IN_UBI :=
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
|
BOARD_NAME := linksys-audi
|
|
endef
|
|
TARGET_DEVICES += linksys_audi
|
|
|
|
define Device/linksys_viper
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := E4200v2 / EA4500 (Viper)
|
|
DEVICE_PACKAGES := kmod-mwl8k wpad-basic kmod-gpio-button-hotplug
|
|
KERNEL_SIZE := 2688k
|
|
KERNEL_IN_UBI :=
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
|
BOARD_NAME := linksys-viper
|
|
endef
|
|
TARGET_DEVICES += linksys_viper
|
|
|
|
define Device/raidsonic_ib-nas62x0
|
|
DEVICE_VENDOR := RaidSonic
|
|
DEVICE_MODEL := ICY BOX IB-NAS62x0
|
|
BOARD_NAME := ib62x0
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
|
|
endef
|
|
TARGET_DEVICES += raidsonic_ib-nas62x0
|
|
|
|
define Device/seagate_dockstar
|
|
DEVICE_VENDOR := Seagate
|
|
DEVICE_MODEL := FreeAgent Dockstar
|
|
BOARD_NAME := dockstar
|
|
endef
|
|
TARGET_DEVICES += seagate_dockstar
|
|
|
|
define Device/seagate_goflexnet
|
|
DEVICE_VENDOR := Seagate
|
|
DEVICE_MODEL := GoFlexNet
|
|
BOARD_NAME := goflexnet
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
|
|
endef
|
|
TARGET_DEVICES += seagate_goflexnet
|
|
|
|
define Device/seagate_goflexhome
|
|
DEVICE_VENDOR := Seagate
|
|
DEVICE_MODEL := GoFlexHome
|
|
BOARD_NAME := goflexhome
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
|
|
endef
|
|
TARGET_DEVICES += seagate_goflexhome
|
|
|
|
define Device/zyxel_nsa310b
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NSA310b
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-r8169 kmod-fs-ext4 \
|
|
kmod-gpio-button-hotplug kmod-hwmon-lm85
|
|
BOARD_NAME := nsa310b
|
|
endef
|
|
TARGET_DEVICES += zyxel_nsa310b
|
|
|
|
define Device/zyxel_nsa310s
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NSA310S
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug
|
|
DEVICE_DTS := kirkwood-nsa310s
|
|
endef
|
|
TARGET_DEVICES += zyxel_nsa310s
|
|
|
|
define Device/zyxel_nsa325
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NSA325
|
|
DEVICE_VARIANT := v1/v2
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
|
|
kmod-gpio-button-hotplug kmod-rtc-pcf8563 kmod-usb3
|
|
BOARD_NAME := nsa325
|
|
endef
|
|
TARGET_DEVICES += zyxel_nsa325
|
|
|
|
$(eval $(call BuildImage))
|