This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
Go to file
Felix Fietkau f34ad1a8f0 mt76: update to the latest version
6745830 mt76: fix race condition in station removal
7e5c819 mt76: add mt76_sta_remove helper
75aa36e mt7603: use wcid/wcid_mask from struct mt76_dev
fd85ff9 mt7603: use mt76_sta_remove helper
0848d2d mt7603: simplify mt7603_mcu_msg_send, remove skb_ret handling
83a80ca mt76: request tx status for powersave released EOSP packet
df5c797 mt76: fix uninitialized mutex access setting rts threshold
0bfa98e mt76: introduce mt76x02_config_mac_addr_list routine
4248446 mt76x0: pci: enable VHT rates in IBSS mode
f75efd8 mt76x2u: phy: add TX_SHAPING calibration
c1d67b4 mt76x2u: phy: run phy_channel_calibrate after channel switch
9fe0fe8 mt76x2u: main: use mt76x02_bss_info_changed utility routine
3fc95d7 mt76x2u: init: remove mt76x2u_init_beacon_offsets routine
88f6883 mt76: remove wait argument from mt76x02_mcu_calibrate
009ab91 mt76: clean up more unused EXPORT_SYMBOLs
963768d mt76x02: fix regression in tx station race condition fix
d7788cc mt76: mt76x02: make group_wcid the first member in struct mt76x02_vif
e65ad4c mt7603: make group_wcid the first member in struct mt7603_vif
7b1373e mt76: mt76x02: remove mt76x02_txq_init
a97127b mt76: replace sta_add/remove ops with common sta_state function
13f1e82 mt7603: clear wtbl entry for removed stations
90e2c1b mt7603: add mt7603_wtbl_set_skip_tx, change mt7603_wtbl_set_ps users
41931e4 mt7603: toggle skip_tx on station add/remove
d0fdf01 mt7603: avoid unnecessary wtbl writes for ps-filter
96b3b3d mt76x2u: main: fix typo setting sta_state mac80211 callback
471d397 mt7603: fix priority for buffered multicast packets
3873e82 mt7603: fix MT_BMAP_0/MT_GROUP_THD_0 register initializion for mt7628
749d5c3 mt7603: fix reserved page handling for mt7628
d22799b mt7603: reduce reserved pages for beacons
42c5281 mt7603: fix maximum frame size in scheduler init
fa7335b mt76: fix potential NULL pointer dereference in mt76_stop_tx_queues
84aa12a mt76: fix potential null pointer deref in mt76_sta_add
7c4c33c mt7603: skip efuse tx power data for mt7628
ca2c875 mt7603: add support for accessing remapped registers via ops
b44d793 mt7603: clear PSE redirections before MCU init
82363ab mt7603: move tx status to rx queue 0
c09e8a4 mt7603: fix buffering of tx packets for powersave clients
4734108 mt7603: use mt7603_wtbl_clear on station removal
9428e34 mt7603: fix watchdog reset sequence
b3f82a3 mt7603: report PSE reset failures via debugfs
a301dec mt7603: add back PSE client reset code
94cebfc mt7603: fix handling lost interrupt events during watchdog reset
b38fe7d mt7603: only issue PSE reset on PSE stuck
da666a7 mt7603: issue PSE reset if firmware debug register indicates stuck queues
5fb60a7 mt7603: fix aggregation size handling
31cd20e mt7603: issue PSE reset on stuck beacon
4063ae1 mt7603: check for PSE hang / stuck beacon first
00e03b9 mt7603: fix MT_WF_PHY_CR_RXTD_BASE definition
c3efb5d mt7603: add support for detecting MT7688 and single stream devices
2a136cb mt7603: fix TKIP key setup
cd456ca mt7603: disable broken support for WEP hardware encryption
3ecb7f8 mt7603: fix hardware queue assignment
6ac9653 mt7603: fix CAB queue limits
d22feb0 mt7603: move cab queue enabling to pre-tbtt tasklet
44bb372 mt7603: fix CAB queue flush mask
5a5b396 mt76: throttle transmission of buffered multicast packets
8084323 mt7603: implement code for adjusting energy detect CCA thresholds
8929a6e mt7603: increase MCU timeout
f2ba65f mt7603: update firmware to 20161027164355
0ad998b mt7603: increase aggregation limits (based on vendor driver changes)
da00af0 mt7603: clear bit 18 in MT_SEC_SCR to fix ICV error
417ab77 mt7603: improve recovery from PSE reset failure
fea7ad8 mt76: move mt76x02_phy_get_min_avg_rssi to mt76 core
9d009be mt7603: add dynamic sensitivity tuning based on false CCA events
2c8e9ac mt7603: initialize channel maximum power from eeprom data
b2cc29b mt76: move mt76x02_get_txpower to mt76 core
6203d46 mt7603: add support for setting transmit power
294e095 mt7603: reset DMA scheduler on MT7628
8178f0d mt7603: apply efuse data only when it exists
e67e551 mt76: dma: remove napi from mt76_dma_rx_fill signature
0490bd2 mt76: usb: do not build the skb if reported len does not fit in buf_size
eb076ae mt76: Add missing include of linux/module.h
1d2819e mt76: fix typo in mt76x02_check_mac_err routine
9c9fae3 mt76: mac: run mt76x02_mac_work routine atomically
6be90b6 mt76: usb: avoid queue/status spinlocks while passing tx status to mac80211
40dad32 mt76x0: pci: fix ACS support
d94e9c4 mt76x02: do not set protection on set_rts_threshold callback
0d83d73 mt76x02: fixup MT_PROT_RATE_* defines
628f8d7 mt76x02: set protection according to ht operation element
f7d8c17 mt76x0: configure MT_VHT_HT_FBK_CFG1
10f57cf mt76x2: add static qualifier to mt76x2_init_hardware
37b2ad3 mt76: dfs: run mt76x02_dfs_set_domain atomically
51b6daf mt76x2: init: set default value for MT_TX_LINK_CFG
9661da4 mt76: add energy detect CCA support to mt76x{0,2}e drivers
876d0e9 mt76: mac: minor optimizations in mt76x02_mac_tx_rate_val
c78e317 mt76: dma: do not build skb if reported len does not fit in buf_size
3598046 mt76: mmio: introduce mt76x02_check_tx_hang watchdog
58988a3 mt76: fix signedness of rx status signal field
bce700d mt7603: fix signal strength reporting on single-stream devices
148219d mt7603: fix checkpatch issues
2a092e2 mt7603: fix per-rate retry accounting
962152b mt7603: fix WMM TXOP limit configuration
24ec040 mt7603: fix BSSID configuration in AP mode
48fb011 mt7603: fix CF-End transmit rate when 11b stations are connected
9daa5ff mt76: make const array 'data' static, shrinks object size
7d4a95c mt76: dma: avoid indirect call in mt76_dma_tx_queue_skb
f84b008 mt76: fix tx status reporting for non-probing frames
8167074 Revert "mt7603: update firmware to 20161027164355"
2ad54b2 mt76: move wcid rssi ewma init to mt76 core
d77c861 mt76: fix rssi ewma tracking
eca96cd mt76: use proper name for __MT76x02_H macro
d1bc504 mt76: fix building without CONFIG_LEDS_CLASS
a946b78 mt76: add led support to mt76x0e driver

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-14 15:16:24 +01:00
.github build: Update README & github help 2018-08-08 15:32:55 +02:00
config build: add support for enabling the rootfs/boot partition size option via target feature 2018-12-18 11:28:12 +01:00
include kernel: bump 4.14 to 4.14.91 2019-01-08 13:13:16 +01:00
package mt76: update to the latest version 2019-01-14 15:16:24 +01:00
scripts scripts: update config.guess and config.sub 2018-12-18 17:22:07 +01:00
target octeon: fix typo in platform.sh 2019-01-13 10:12:56 +01:00
toolchain toolchain: gdb: enable TUI 2018-12-18 09:44:04 +01:00
tools tools/firmware-utils: fix sysupgrade typo in mkdapimg2 2019-01-13 10:13:18 +01:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore .gitignore: add .project & .cproject for eclipse users 2018-01-17 11:07:17 +01:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in merge: base: update base-files and basic config 2017-12-08 19:41:18 +01:00
feeds.conf.default OpenWrt v18.06.1: revert to branch defaults 2018-08-16 18:36:52 +02:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile build: Unset CDPATH to avoid problems 2018-12-18 11:28:11 +01:00
README build: README punctuation pendantry 2018-08-08 15:33:03 +02:00
rules.mk rules.mk: add ESED command 2018-12-18 11:28:13 +01:00

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org