openwrt/target/linux
Nick Briggs 3df3bb0dae ramips: add support for EnGenius ESR600
The EnGenius ESR600 is a dual band wireless router with a 4-port gigabit
Ethernet switch, a gigabit Ethernet WAN port and a USB port.

Specification:

- Bootloader:	U-Boot
- SoC:		MediaTek MT7620A (600 MHz)
- Flash:	16MB, Macronix MX25L12845E
- RAM:		64MB, Nanya NT5TU32M16DG-AC
- Serial:	115200 baud, no header, 3.3V
  		J2: Vcc (arrow), Gnd, Tx, Rx
- USB:		USB 2, 5V
- Ethernet:	5 x 1 Gb/s 4 LAN 1 WAN, Atheros AR8327
- WiFi0:	5 GHz 802.11 b/g/n Ralink RT5592N
  		300 Mb/s, 2T2R
- WiFi1:	2.4 GHz 802.11 b/g/n integrated
  		300 Mb/s, 2T2R
- Antennas:	2 per radio, internal
- LEDs:		1 programmable power (amber)
  		2 programable radio (blue)
		1 programable WPS-5G (blue)
		1 non-programable WAN activity (blue)
		1 unconfigured WPS-2.4G (amber)
- Buttons:	GPIO: Reset, WPS

Installation:

Use the OEM web interface to install the ...-factory.dlf image.
Use the OpenWRT ...-sysupgrade.bin image for future upgrades.

The J2 serial port can be accessed either by soldering in a header,
standard 0.1" spacing, or by using pogo-pins against the back side.

As configured by the OEM, the U-Boot boot delay is short, however quickly
typing "1" leads to the U-Boot "System load Linux to SDRAM via TFTP"
prompt.  The TFTP client is configured by default with
     client:   192.168.99.9
     server:   192.168.99.8
     filename: uImageESR600
It will load an OpenWRT initramfs kernel with this method.

Known issues:

1) Only the ports externally labeled WAN, LAN3 and LAN4 are operational.
LAN1 and LAN2 do not appear to power up. This issue is also present
in the Lava LR25G001.

2) The amber WPS-2.4G LED, in the same lightguide as the blue WPS-5G LED,
is not configured in the Device Tree specification.

3) The blue WAN activity LED is not configured in the Device Tree
specification as this causes the AR8327 switch to fail to initialize.

Signed-off-by: Nick Briggs <nicholas.h.briggs@gmail.com>
[merge conflict in 02_network]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-09-20 11:36:27 +02:00
..
apm821xx apm821xx: image: remove unused kernel.dtb from IMAGES 2019-09-15 15:00:39 +00:00
ar7 kernel: bump 4.9 to 4.9.186 2019-07-31 16:51:46 +02:00
ar71xx ar71xx: fix typo in platform_do_upgrade_compex() 2019-09-16 07:00:22 +02:00
arc770 treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
archs38 treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
armvirt armvirt: fix overlay support by updating to f2fs/ext4 based overlays 2019-06-25 14:12:22 +00:00
at91 at91/image/sama5.mk: check for sama5d4_xplained device 2019-08-17 23:09:04 +02:00
ath25 treewide: sysupgrade: use $UPGRADE_BACKUP to check for backup 2019-09-11 09:05:35 +02:00
ath79 ath79: add SUPPORTED_DEVICES to ubnt_nanostation-m-xw 2019-09-19 23:43:27 +02:00
bcm53xx bcm53xx: sysupgrade: support Luxul firmware format 2019-09-16 16:01:42 +02:00
brcm47xx brcm47xx: sysupgrade: support Luxul firmware format 2019-09-16 21:37:33 +02:00
brcm63xx brcm63xx: remove redundant variable definition in Makefile 2019-09-14 11:43:19 +02:00
brcm2708 brcm2708: fix Hifiberry DAC+DSP package definition 2019-09-20 07:50:47 +02:00
cns3xxx treewide: sysupgrade: don't use $ARGV in platform_do_upgrade() 2019-07-17 08:05:38 +02:00
gemini kernel: bump 4.19 to 4.19.71 2019-09-11 09:47:49 +02:00
generic kernel: Correctly search for the FIT image in mtd partition. 2019-09-19 23:43:27 +02:00
imx6 imx6: install-dtb as separate IMAGE 2019-09-15 15:00:17 +00:00
ipq40xx treewide: sysupgrade: use $UPGRADE_BACKUP to check for backup 2019-09-11 09:05:35 +02:00
ipq806x ipq806x: provide label MAC address 2019-09-19 23:43:27 +02:00
ixp4xx treewide: sysupgrade: use $UPGRADE_BACKUP to check for backup 2019-09-11 09:05:35 +02:00
kirkwood treewide: sync bootcount scripts across targets 2019-08-17 23:52:34 +08:00
lantiq lantiq-dsl: fix value of FECS counter 2019-09-19 23:43:27 +02:00
layerscape kernel: bump 4.14 to 4.14.142 2019-09-11 09:47:49 +02:00
malta malta: fix overlay support by updating to f2fs/ext4 based overlays 2019-06-25 14:12:22 +00:00
mediatek mediatek: enable mtk_efuse by default 2019-09-15 22:56:09 +02:00
mpc85xx mpc85xx: provide label MAC address 2019-09-19 23:43:27 +02:00
mvebu treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-05 23:33:19 +02:00
mxs mxs: disable unused serial drivers 2019-03-11 19:35:43 +01:00
octeon treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-05 23:33:19 +02:00
octeontx kernel: Remove CONFIG_COMPAT 2019-05-11 17:15:41 +02:00
omap treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-05 23:33:19 +02:00
orion orion: sysupgrade: change platform_check_image() args validation 2019-07-16 13:58:26 +02:00
oxnas oxnas: convert DEVICE_TITLE to new variables 2019-07-10 16:56:16 +02:00
pistachio treewide: sysupgrade: get rid of platform_nand_pre_upgrade() 2019-07-22 14:27:37 +02:00
ramips ramips: add support for EnGenius ESR600 2019-09-20 11:36:27 +02:00
rb532 treewide: sysupgrade: get rid of platform_nand_pre_upgrade() 2019-07-22 14:27:37 +02:00
samsung samsung: split up DEVICE_TITLE 2019-09-11 15:17:09 +02:00
sunxi treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-05 23:33:19 +02:00
tegra treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-05 23:33:19 +02:00
uml kernel: Deactivate CONFIG_BINFMT_MISC 2019-05-11 17:15:41 +02:00
x86 treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-05 23:33:19 +02:00
zynq zynq: remove kernel 4.14 support 2019-08-17 16:57:32 +02:00
Makefile