mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 14:37:57 +00:00
f32085fc0b
Airoha is a new ARM platform based on Cortex-A53 which has recently been merged into linux-next. Due to BootROM limitations on this platform, the Cortex-A53 can't run in Aarch64 mode and code must be compiled for 32-Bit ARM. This support is based mostly on those linux-next commits backported for kernel 5.15. Patches: 1 - platform support = linux-next 2 - clock driver = linux-next 3 - gpio driver = linux-next 4 - linux,usable-memory-range dts support = linux-next 5 - mtd spinand driver 6 - spi driver 7 - pci driver (kconfig only, uses mediatek PCI) = linux-next Still missing: - Ethernet driver - Sysupgrade support A.t.m there exists one subtarget EN7523 with only one evaluation board. The initramfs can be run with the following commands from u-boot: - u-boot> setenv bootfile \ openwrt-airoha-airoha_en7523-evb-initramfs-kernel.bin u-boot> tftpboot u-boot> bootm 0x81800000 - Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
138 lines
4.3 KiB
Diff
138 lines
4.3 KiB
Diff
diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
|
|
index 9c64d9fc..5f99ea72 100644
|
|
--- a/drivers/mtd/nand/spi/Makefile
|
|
+++ b/drivers/mtd/nand/spi/Makefile
|
|
@@ -1,3 +1,3 @@
|
|
# SPDX-License-Identifier: GPL-2.0
|
|
-spinand-objs := core.o esmt.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
|
|
+spinand-objs := core.o esmt.o etron.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
|
|
obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
|
|
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
|
|
index 9839ee44..9ab44217 100644
|
|
--- a/drivers/mtd/nand/spi/core.c
|
|
+++ b/drivers/mtd/nand/spi/core.c
|
|
@@ -898,6 +898,7 @@ static const struct nand_ops spinand_ops = {
|
|
static const struct spinand_manufacturer *spinand_manufacturers[] = {
|
|
&esmt_c8_spinand_manufacturer,
|
|
&gigadevice_spinand_manufacturer,
|
|
+ &etron_spinand_manufacturer,
|
|
¯onix_spinand_manufacturer,
|
|
µn_spinand_manufacturer,
|
|
¶gon_spinand_manufacturer,
|
|
diff --git a/drivers/mtd/nand/spi/etron.c b/drivers/mtd/nand/spi/etron.c
|
|
new file mode 100644
|
|
index 00000000..653092be
|
|
--- /dev/null
|
|
+++ b/drivers/mtd/nand/spi/etron.c
|
|
@@ -0,0 +1,98 @@
|
|
+// SPDX-License-Identifier: GPL-2.0
|
|
+
|
|
+#include <linux/device.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/mtd/spinand.h>
|
|
+
|
|
+#define SPINAND_MFR_ETRON 0xd5
|
|
+
|
|
+
|
|
+static SPINAND_OP_VARIANTS(read_cache_variants,
|
|
+ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
|
|
+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
|
|
+ SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
|
|
+ SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
|
|
+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
|
|
+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
|
|
+
|
|
+static SPINAND_OP_VARIANTS(write_cache_variants,
|
|
+ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
|
|
+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
|
|
+
|
|
+static SPINAND_OP_VARIANTS(update_cache_variants,
|
|
+ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
|
|
+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
|
|
+
|
|
+static int etron_ooblayout_ecc(struct mtd_info *mtd, int section,
|
|
+ struct mtd_oob_region *oobregion)
|
|
+{
|
|
+ if (section)
|
|
+ return -ERANGE;
|
|
+
|
|
+ oobregion->offset = 72;
|
|
+ oobregion->length = 56;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int etron_ooblayout_free(struct mtd_info *mtd, int section,
|
|
+ struct mtd_oob_region *oobregion)
|
|
+{
|
|
+ if (section)
|
|
+ return -ERANGE;
|
|
+
|
|
+ oobregion->offset = 1;
|
|
+ oobregion->length = 71;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int etron_ecc_get_status(struct spinand_device *spinand, u8 status)
|
|
+{
|
|
+ switch (status & STATUS_ECC_MASK) {
|
|
+ case STATUS_ECC_NO_BITFLIPS:
|
|
+ return 0;
|
|
+
|
|
+ case STATUS_ECC_HAS_BITFLIPS:
|
|
+ /* Between 1-7 bitflips were corrected */
|
|
+ return 7;
|
|
+
|
|
+ case STATUS_ECC_MASK:
|
|
+ /* Maximum bitflips were corrected */
|
|
+ return 8;
|
|
+
|
|
+ case STATUS_ECC_UNCOR_ERROR:
|
|
+ return -EBADMSG;
|
|
+ }
|
|
+
|
|
+ return -EINVAL;
|
|
+}
|
|
+
|
|
+static const struct mtd_ooblayout_ops etron_ooblayout = {
|
|
+ .ecc = etron_ooblayout_ecc,
|
|
+ .free = etron_ooblayout_free,
|
|
+};
|
|
+
|
|
+static const struct spinand_info etron_spinand_table[] = {
|
|
+ SPINAND_INFO("EM73D044VCx",
|
|
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x1f),
|
|
+ // bpc, pagesize, oobsize, pagesperblock, bperlun, maxbadplun, ppl, lpt, #t
|
|
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
|
|
+ NAND_ECCREQ(8, 512),
|
|
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
|
|
+ &write_cache_variants,
|
|
+ &update_cache_variants),
|
|
+ SPINAND_HAS_QE_BIT,
|
|
+ SPINAND_ECCINFO(&etron_ooblayout, etron_ecc_get_status)),
|
|
+};
|
|
+
|
|
+static const struct spinand_manufacturer_ops etron_spinand_manuf_ops = {
|
|
+};
|
|
+
|
|
+const struct spinand_manufacturer etron_spinand_manufacturer = {
|
|
+ .id = SPINAND_MFR_ETRON,
|
|
+ .name = "Etron",
|
|
+ .chips = etron_spinand_table,
|
|
+ .nchips = ARRAY_SIZE(etron_spinand_table),
|
|
+ .ops = &etron_spinand_manuf_ops,
|
|
+};
|
|
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
|
|
index 2066962d..11d38d2f 100644
|
|
--- a/include/linux/mtd/spinand.h
|
|
+++ b/include/linux/mtd/spinand.h
|
|
@@ -261,6 +261,7 @@ struct spinand_manufacturer {
|
|
|
|
/* SPI NAND manufacturers */
|
|
extern const struct spinand_manufacturer esmt_c8_spinand_manufacturer;
|
|
+extern const struct spinand_manufacturer etron_spinand_manufacturer;
|
|
extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
|
|
extern const struct spinand_manufacturer macronix_spinand_manufacturer;
|
|
extern const struct spinand_manufacturer micron_spinand_manufacturer;
|