mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
f2e1d37381
Motivation: Firmware with platform ID "XR450" required for easy installation. Manufacturer pages: Product page: https://www.netgear.com/support/product/xr450 Product Data Sheet: https://www.netgear.com/images/datasheet/networking/wifirouter/XR450.pdf Current firmware: https://www.downloads.netgear.com/files/GDC/XR450/XR450-V2.3.2.134.zip Specifications: Almost identical to Netgear XR500(https://openwrt.org/toh/hwdata/netgear/netgear_xr500) Differences: Platform ID: XR450, utilized for firmware validation WLAN 2.4GHz: b/g/n Supports QAM64 (XR500 QAM256) SoC: Qualcomm Atheros IPQ8065 RAM: 512 MB Storage: 256 MiB Wireless: Qualcomm Atheros QCA9984 Switch: Qualcomm Atheros AR8337 rev. 2 Ethernet: 5x 1000/100/10 USB: 2x 3.0 Install via WEB GUI (recommended): 1. Navigate within GUI to firmware update section 2. Select openwrt-ipq806x-netgear_xr450-squashfs-factory.img 3. Dismiss downgrade warning Install via TFTP recovery (same as XR500/R7800): 1. Configure host PC to use static address 192.168.1.10 https://openwrt.org/toh/netgear/r7800#prerequisites_for_tftp_flashing 2. Flash openwrt-ipq806x-netgear_xr450-squashfs-factory.img using procedure https://openwrt.org/toh/netgear/r7800#tftp_flashing_process Revert to stock firmware 1. Download current manufacturer firmware, decompress zip file to obtain img file 2. Use TFTP recovery method flash img file (currently XR450-V2.3.2.134.img) ipq806x: add support to netgear_xr450 Signed-off-by: Andrzej Mialkowski <andrzej.mialkowski@gmail.com>
85 lines
3.0 KiB
Plaintext
85 lines
3.0 KiB
Plaintext
#
|
|
# Copyright (C) 2015 OpenWrt.org
|
|
#
|
|
|
|
. /lib/functions/uci-defaults.sh
|
|
|
|
board_config_update
|
|
|
|
board=$(board_name)
|
|
|
|
case "$board" in
|
|
buffalo,wxr-2533dhp)
|
|
ucidef_set_led_wlan "wlan" "WLAN" "white:wireless" "phy0tpt"
|
|
ucidef_set_led_switch "wan" "WAN" "white:internet" "switch0" "0x20"
|
|
;;
|
|
compex,wpq864)
|
|
ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
|
|
ucidef_set_led_usbport "pcie-usb" "PCIe USB" "green:usb-pcie" "usb3-port1"
|
|
;;
|
|
edgecore,ecw5410)
|
|
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy1tpt"
|
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0tpt"
|
|
;;
|
|
meraki,mr52)
|
|
ucidef_set_led_netdev "eth0" "eth0" "green:lan1" "eth0"
|
|
ucidef_set_led_netdev "eth1" "eth1" "green:lan2" "eth1"
|
|
;;
|
|
nec,wg2600hp)
|
|
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy1tpt"
|
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0tpt"
|
|
ucidef_set_led_switch "wan" "WAN" "green:active" "switch0" "0x2"
|
|
;;
|
|
nec,wg2600hp3)
|
|
ucidef_set_led_switch "wan" "WAN" "green:active" "switch0" "0x2"
|
|
;;
|
|
netgear,d7800 |\
|
|
netgear,r7500 |\
|
|
netgear,r7500v2 |\
|
|
netgear,r7800 |\
|
|
netgear,xr450 |\
|
|
netgear,xr500)
|
|
ucidef_set_led_usbport "usb1" "USB 1" "white:usb1" "usb1-port1" "usb2-port1"
|
|
ucidef_set_led_usbport "usb2" "USB 2" "white:usb2" "usb3-port1" "usb4-port1"
|
|
ucidef_set_led_switch "wan" "WAN" "white:wan" "switch0" "0x20"
|
|
ucidef_set_led_ide "esata" "eSATA" "white:esata"
|
|
;;
|
|
nokia,ac400i)
|
|
ucidef_set_led_wlan "wlan5g" "5G" "green:wlan5g" "wlan0"
|
|
ucidef_set_led_wlan "wlan2g" "2.4G" "green:wlan2g" "wlan1"
|
|
ucidef_set_led_netdev "eth1" "ETH1" "green:eth1" "eth0"
|
|
ucidef_set_led_netdev "eth2" "ETH2" "green:eth2" "eth1"
|
|
ucidef_set_led_default "ctrl" "CTRL" "green:ctrl" "0"
|
|
ucidef_set_led_default "pwr" "PWR" "green:power" "1"
|
|
;;
|
|
tplink,ad7200)
|
|
ucidef_set_led_usbport "usb1" "USB 1" "blue:usb1" "usb1-port1" "usb2-port1"
|
|
ucidef_set_led_usbport "usb2" "USB 2" "blue:usb3" "usb3-port1" "usb4-port1"
|
|
ucidef_set_led_switch "wan" "wan" "blue:wan" "switch0" "0x02"
|
|
ucidef_set_led_switch "lan" "lan" "blue:lan" "switch0" "0x3c"
|
|
ucidef_set_led_wlan "wlan2g" "wlan2g" "blue:wlan2g" "phy2tpt"
|
|
ucidef_set_led_wlan "wlan5g" "wlan5g" "blue:wlan5g" "phy1tpt"
|
|
ucidef_set_led_netdev "wlan60g" "wlan60g" "blue:wlan60g" "wlan0"
|
|
;;
|
|
tplink,c2600)
|
|
ucidef_set_led_usbport "usb1" "USB 1" "white:usb_2" "usb1-port1" "usb2-port1"
|
|
ucidef_set_led_usbport "usb2" "USB 2" "white:usb_4" "usb3-port1" "usb4-port1"
|
|
ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x20"
|
|
ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x1e"
|
|
;;
|
|
tplink,vr2600v)
|
|
ucidef_set_led_usbport "usb" "USB" "white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
|
|
ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x1e"
|
|
ucidef_set_led_wlan "wlan2g" "WLAN2G" "white:wlan2g" "phy0tpt"
|
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "white:wlan5g" "phy1tpt"
|
|
ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x20"
|
|
;;
|
|
zyxel,nbg6817)
|
|
ucidef_set_led_netdev "wan" "WAN" "white:internet" "eth1"
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|