mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
9a49788008
Commit adc69fe (""uboot-at91: changed som1 ek default defconfigs")
changed the booting media to sdmmc1 as default booting w/o any reason.
The Microchip releases for the rest of supported distributions (Buildroot,
Yocto Project) uses sdmmc0 as default booting media for this board.
Thus change it back to sdmmc0. With this remove references to sdmmc1
config. The initial commit cannot be cleanly reverted.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
16 lines
1.1 KiB
Plaintext
16 lines
1.1 KiB
Plaintext
/* Do Not remove First 2 lines, Makefile will modify these lines with proper board names */
|
|
board=atmel_at91sam9x25ek
|
|
board_name=atmel,at91sam9x25ek
|
|
bootargs=console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4
|
|
bootargsd2=console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait rootfstype=ext4
|
|
bootargsxx=console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4
|
|
bootcmd=run setloadaddr; run setbootargs; run fatload_mmc; bootm ${loadaddr}
|
|
bootdelay=1
|
|
fatload_mmc=if test ${board_name} = atmel,sama5d2-xplained || test ${board_name} = microchip,sama7g5ek; then fatload mmc 1:1 ${loadaddr} ${board}-fit.itb; else fatload mmc 0:1 ${loadaddr} ${board}-fit.itb; fi
|
|
setbootargs=if test ${board_name} = atmel,sama5d2-xplained || test ${board_name} = microchip,sama7g5ek; then setenv bootargs ${bootargsd2}; else setenv bootargs ${bootargsxx}; fi
|
|
setloadaddr=if test ${board_name} = microchip,sama7g5ek; then setenv loadaddr 0x63000000; else setenv loadaddr 0x21000000; fi
|
|
ethact=gmac0
|
|
stderr=serial
|
|
stdin=serial
|
|
stdout=serial
|