mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-01 03:26:51 +00:00
621297e867
The "/dts-v1/;" identifier is supposed to be present once at the top of a device tree file after the includes have been processed. In ramips, we therefore requested to have in the DTS files so far, and omit it in the DTSI files. However, essentially the syntax of the parent mtxxxx/rtxxxx DTSI files already determines the DTS version, so putting it into the DTS files is just a useless repetition. Consequently, this patch puts the dts-v1 statement into the top-level SoC-based DTSI files, and removes all other occurences. Since the dts-v1 statement needs to be before any other definitions, this also moves the includes accordingly where necessary. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
245 lines
4.0 KiB
Plaintext
245 lines
4.0 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "mt7621.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
compatible = "netgear,ex6150", "mediatek,mt7621-soc";
|
|
model = "Netgear EX6150";
|
|
|
|
aliases {
|
|
led-boot = &power_green;
|
|
led-failsafe = &power_amber;
|
|
led-running = &power_green;
|
|
led-upgrade = &power_amber;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
power_amber: power_amber {
|
|
label = "ex6150:amber:power";
|
|
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
power_green: power_green {
|
|
label = "ex6150:green:power";
|
|
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wps {
|
|
label = "ex6150:green:wps";
|
|
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
rightarrow {
|
|
label = "ex6150:blue:rightarrow";
|
|
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
leftarrow {
|
|
label = "ex6150:blue:leftarrow";
|
|
gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
router_green {
|
|
label = "ex6150:green:router";
|
|
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "phy1tpt";
|
|
};
|
|
|
|
router_red {
|
|
label = "ex6150:red:router";
|
|
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
client_green {
|
|
label = "ex6150:green:client";
|
|
gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "phy0tpt";
|
|
};
|
|
|
|
client_red {
|
|
label = "ex6150:red:client";
|
|
gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
toggle {
|
|
label = "AP/Extender toggle";
|
|
gpios = <&gpio 48 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_0>;
|
|
/* Active when switch is set to "Access Point" */
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0 0x30000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@30000 {
|
|
label = "config";
|
|
reg = <0x30000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
factory: partition@40000 {
|
|
label = "factory";
|
|
reg = <0x40000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@50000 {
|
|
compatible = "denx,uimage";
|
|
label = "firmware";
|
|
reg = <0x50000 0xe80000>;
|
|
};
|
|
|
|
partition@ed0000 {
|
|
label = "ML1";
|
|
reg = <0xed0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@ef0000 {
|
|
label = "ML2";
|
|
reg = <0xef0000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@f10000 {
|
|
label = "ML3";
|
|
reg = <0xf10000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@f30000 {
|
|
label = "ML4";
|
|
reg = <0xf30000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@f50000 {
|
|
label = "ML5";
|
|
reg = <0xf50000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@f70000 {
|
|
label = "ML6";
|
|
reg = <0xf70000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@f90000 {
|
|
label = "ML7";
|
|
reg = <0xf90000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@fb0000 {
|
|
label = "T_Meter1";
|
|
reg = <0xfb0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@fc0000 {
|
|
label = "T_Meter2";
|
|
reg = <0xfc0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@fd0000 {
|
|
label = "POT";
|
|
reg = <0xfd0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@fe0000 {
|
|
label = "board_data";
|
|
reg = <0xfe0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@ff0000 {
|
|
label = "nvram";
|
|
reg = <0xff0000 0x10000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
wifi@0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
mediatek,mtd-eeprom = <&factory 0x8000>;
|
|
ieee80211-freq-limit = <5000000 6000000>;
|
|
};
|
|
};
|
|
|
|
&pcie1 {
|
|
wifi@0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
mediatek,mtd-eeprom = <&factory 0x0000>;
|
|
ieee80211-freq-limit = <2400000 2500000>;
|
|
};
|
|
};
|
|
|
|
&gmac0 {
|
|
mtd-mac-address = <&factory 0x4>;
|
|
};
|
|
|
|
&switch0 {
|
|
ports {
|
|
port@0 {
|
|
status = "okay";
|
|
label = "lan";
|
|
};
|
|
};
|
|
};
|
|
|
|
&state_default {
|
|
gpio {
|
|
groups = "sdhci", "rgmii2", "jtag";
|
|
function = "gpio";
|
|
};
|
|
};
|