mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 16:31:13 +00:00
b3795d0c93
use: - 00nn for u-boot patches - 01nn for new boards While doing the rework, the board definitions for the easy50712 and easy80920 were moved to distinct board definitions patches. Signed-off-by: Mathias Kresin <dev@kresin.me>
380 lines
13 KiB
Diff
380 lines
13 KiB
Diff
--- /dev/null
|
|
+++ b/board/lantiq/easy80920/Makefile
|
|
@@ -0,0 +1,27 @@
|
|
+#
|
|
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
|
|
+#
|
|
+# SPDX-License-Identifier: GPL-2.0+
|
|
+#
|
|
+
|
|
+include $(TOPDIR)/config.mk
|
|
+
|
|
+LIB = $(obj)lib$(BOARD).o
|
|
+
|
|
+COBJS = $(BOARD).o
|
|
+
|
|
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
|
+OBJS := $(addprefix $(obj),$(COBJS))
|
|
+SOBJS := $(addprefix $(obj),$(SOBJS))
|
|
+
|
|
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
|
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
|
|
+
|
|
+#########################################################################
|
|
+
|
|
+# defines $(obj).depend target
|
|
+include $(SRCTREE)/rules.mk
|
|
+
|
|
+sinclude $(obj).depend
|
|
+
|
|
+#########################################################################
|
|
--- /dev/null
|
|
+++ b/board/lantiq/easy80920/config.mk
|
|
@@ -0,0 +1,7 @@
|
|
+#
|
|
+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
|
|
+#
|
|
+# SPDX-License-Identifier: GPL-2.0+
|
|
+#
|
|
+
|
|
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
|
|
--- /dev/null
|
|
+++ b/board/lantiq/easy80920/ddr_settings.h
|
|
@@ -0,0 +1,69 @@
|
|
+/*
|
|
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
|
|
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
|
|
+ *
|
|
+ * SPDX-License-Identifier: GPL-2.0+
|
|
+ */
|
|
+
|
|
+#define MC_CCR00_VALUE 0x101
|
|
+#define MC_CCR01_VALUE 0x1000100
|
|
+#define MC_CCR02_VALUE 0x1010000
|
|
+#define MC_CCR03_VALUE 0x101
|
|
+#define MC_CCR04_VALUE 0x1000000
|
|
+#define MC_CCR05_VALUE 0x1000101
|
|
+#define MC_CCR06_VALUE 0x1000100
|
|
+#define MC_CCR07_VALUE 0x1010000
|
|
+#define MC_CCR08_VALUE 0x1000101
|
|
+#define MC_CCR09_VALUE 0x0
|
|
+#define MC_CCR10_VALUE 0x2000100
|
|
+#define MC_CCR11_VALUE 0x2000300
|
|
+#define MC_CCR12_VALUE 0x30000
|
|
+#define MC_CCR13_VALUE 0x202
|
|
+#define MC_CCR14_VALUE 0x7080A0F
|
|
+#define MC_CCR15_VALUE 0x2040F
|
|
+#define MC_CCR16_VALUE 0x40000
|
|
+#define MC_CCR17_VALUE 0x70102
|
|
+#define MC_CCR18_VALUE 0x4020002
|
|
+#define MC_CCR19_VALUE 0x30302
|
|
+#define MC_CCR20_VALUE 0x8000700
|
|
+#define MC_CCR21_VALUE 0x40F020A
|
|
+#define MC_CCR22_VALUE 0x0
|
|
+#define MC_CCR23_VALUE 0xC020000
|
|
+#define MC_CCR24_VALUE 0x4401B04
|
|
+#define MC_CCR25_VALUE 0x0
|
|
+#define MC_CCR26_VALUE 0x0
|
|
+#define MC_CCR27_VALUE 0x6420000
|
|
+#define MC_CCR28_VALUE 0x0
|
|
+#define MC_CCR29_VALUE 0x0
|
|
+#define MC_CCR30_VALUE 0x798
|
|
+#define MC_CCR31_VALUE 0x0
|
|
+#define MC_CCR32_VALUE 0x0
|
|
+#define MC_CCR33_VALUE 0x650000
|
|
+#define MC_CCR34_VALUE 0x200C8
|
|
+#define MC_CCR35_VALUE 0x1D445D
|
|
+#define MC_CCR36_VALUE 0xC8
|
|
+#define MC_CCR37_VALUE 0xC351
|
|
+#define MC_CCR38_VALUE 0x0
|
|
+#define MC_CCR39_VALUE 0x141F04
|
|
+#define MC_CCR40_VALUE 0x142704
|
|
+#define MC_CCR41_VALUE 0x141b42
|
|
+#define MC_CCR42_VALUE 0x141b42
|
|
+#define MC_CCR43_VALUE 0x566504
|
|
+#define MC_CCR44_VALUE 0x566504
|
|
+#define MC_CCR45_VALUE 0x565F17
|
|
+#define MC_CCR46_VALUE 0x565F17
|
|
+#define MC_CCR47_VALUE 0x0
|
|
+#define MC_CCR48_VALUE 0x0
|
|
+#define MC_CCR49_VALUE 0x0
|
|
+#define MC_CCR50_VALUE 0x0
|
|
+#define MC_CCR51_VALUE 0x0
|
|
+#define MC_CCR52_VALUE 0x133
|
|
+#define MC_CCR53_VALUE 0xF3014B27
|
|
+#define MC_CCR54_VALUE 0xF3014B27
|
|
+#define MC_CCR55_VALUE 0xF3014B27
|
|
+#define MC_CCR56_VALUE 0xF3014B27
|
|
+#define MC_CCR57_VALUE 0x7800301
|
|
+#define MC_CCR58_VALUE 0x7800301
|
|
+#define MC_CCR59_VALUE 0x7800301
|
|
+#define MC_CCR60_VALUE 0x7800301
|
|
+#define MC_CCR61_VALUE 0x4
|
|
--- /dev/null
|
|
+++ b/board/lantiq/easy80920/easy80920.c
|
|
@@ -0,0 +1,138 @@
|
|
+/*
|
|
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
|
|
+ *
|
|
+ * SPDX-License-Identifier: GPL-2.0+
|
|
+ */
|
|
+
|
|
+#include <common.h>
|
|
+#include <spi.h>
|
|
+#include <asm/gpio.h>
|
|
+#include <asm/lantiq/eth.h>
|
|
+#include <asm/lantiq/chipid.h>
|
|
+#include <asm/lantiq/cpu.h>
|
|
+#include <asm/arch/gphy.h>
|
|
+
|
|
+#if defined(CONFIG_SPL_BUILD)
|
|
+#define do_gpio_init 1
|
|
+#define do_pll_init 1
|
|
+#define do_dcdc_init 0
|
|
+#elif defined(CONFIG_SYS_BOOT_RAM)
|
|
+#define do_gpio_init 1
|
|
+#define do_pll_init 0
|
|
+#define do_dcdc_init 1
|
|
+#elif defined(CONFIG_SYS_BOOT_NOR)
|
|
+#define do_gpio_init 1
|
|
+#define do_pll_init 1
|
|
+#define do_dcdc_init 1
|
|
+#else
|
|
+#define do_gpio_init 0
|
|
+#define do_pll_init 0
|
|
+#define do_dcdc_init 1
|
|
+#endif
|
|
+
|
|
+static void gpio_init(void)
|
|
+{
|
|
+ /* SPI CS 0.4 to serial flash */
|
|
+ gpio_direction_output(10, 1);
|
|
+
|
|
+ /* EBU.FL_CS1 as output for NAND CE */
|
|
+ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
|
|
+ /* EBU.FL_A23 as output for NAND CLE */
|
|
+ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
|
|
+ /* EBU.FL_A24 as output for NAND ALE */
|
|
+ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
|
|
+ /* GPIO 3.0 as input for NAND Ready Busy */
|
|
+ gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
|
|
+ /* GPIO 3.1 as output for NAND Read */
|
|
+ gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
|
|
+}
|
|
+
|
|
+int board_early_init_f(void)
|
|
+{
|
|
+ if (do_gpio_init)
|
|
+ gpio_init();
|
|
+
|
|
+ if (do_pll_init)
|
|
+ ltq_pll_init();
|
|
+
|
|
+ if (do_dcdc_init)
|
|
+ ltq_dcdc_init(0x7F);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+int checkboard(void)
|
|
+{
|
|
+ puts("Board: " CONFIG_BOARD_NAME "\n");
|
|
+ ltq_chip_print_info();
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static const struct ltq_eth_port_config eth_port_config[] = {
|
|
+ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
|
|
+ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
|
|
+ /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
|
|
+ { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
|
|
+ /* GMAC2: internal GPHY0 with 10/100/1000 firmware for LAN port 2 */
|
|
+ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
|
|
+ /* GMAC3: unused */
|
|
+ { 3, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
|
|
+ /* GMAC4: internal GPHY1 with 10/100/1000 firmware for LAN port 3 */
|
|
+ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
|
|
+ /* GMAC5: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */
|
|
+ { 5, 0x5, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
|
|
+};
|
|
+
|
|
+static const struct ltq_eth_board_config eth_board_config = {
|
|
+ .ports = eth_port_config,
|
|
+ .num_ports = ARRAY_SIZE(eth_port_config),
|
|
+};
|
|
+
|
|
+int board_eth_init(bd_t * bis)
|
|
+{
|
|
+ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
|
|
+ const ulong fw_addr = 0x80FF0000;
|
|
+
|
|
+ ltq_gphy_phy11g_a1x_load(fw_addr);
|
|
+
|
|
+ ltq_cgu_gphy_clk_src(clk);
|
|
+
|
|
+ ltq_rcu_gphy_boot(0, fw_addr);
|
|
+ ltq_rcu_gphy_boot(1, fw_addr);
|
|
+
|
|
+ return ltq_eth_initialize(ð_board_config);
|
|
+}
|
|
+
|
|
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
+{
|
|
+ if (bus)
|
|
+ return 0;
|
|
+
|
|
+ if (cs == 4)
|
|
+ return 1;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+void spi_cs_activate(struct spi_slave *slave)
|
|
+{
|
|
+ switch (slave->cs) {
|
|
+ case 4:
|
|
+ gpio_set_value(10, 0);
|
|
+ break;
|
|
+ default:
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+void spi_cs_deactivate(struct spi_slave *slave)
|
|
+{
|
|
+ switch (slave->cs) {
|
|
+ case 4:
|
|
+ gpio_set_value(10, 1);
|
|
+ break;
|
|
+ default:
|
|
+ break;
|
|
+ }
|
|
+}
|
|
--- a/boards.cfg
|
|
+++ b/boards.cfg
|
|
@@ -509,6 +509,11 @@ Active mips mips32 incai
|
|
Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd@denx.de>
|
|
Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd@denx.de>
|
|
Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd@denx.de>
|
|
+Active mips mips32 vrx200 lantiq easy80920 easy80920_nandspl easy80920:SYS_BOOT_NANDSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
|
|
+Active mips mips32 vrx200 lantiq easy80920 easy80920_nor easy80920:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
|
|
+Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
|
|
+Active mips mips32 vrx200 lantiq easy80920 easy80920_ram easy80920:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
|
|
+Active mips mips32 vrx200 lantiq easy80920 easy80920_sfspl easy80920:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
|
|
Active mips mips64 - - qemu-mips qemu_mips64 qemu-mips64:SYS_BIG_ENDIAN -
|
|
Active mips mips64 - - qemu-mips qemu_mips64el qemu-mips64:SYS_LITTLE_ENDIAN -
|
|
Active nds32 n1213 ag101 AndesTech adp-ag101 adp-ag101 - Andes <uboot@andestech.com>
|
|
--- /dev/null
|
|
+++ b/include/configs/easy80920.h
|
|
@@ -0,0 +1,109 @@
|
|
+/*
|
|
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
|
|
+ *
|
|
+ * SPDX-License-Identifier: GPL-2.0+
|
|
+ */
|
|
+
|
|
+#ifndef __CONFIG_H
|
|
+#define __CONFIG_H
|
|
+
|
|
+#define CONFIG_MACH_TYPE "EASY80920"
|
|
+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
|
|
+#define CONFIG_BOARD_NAME "Lantiq EASY80920 VRX200 Family Board"
|
|
+
|
|
+/* Configure SoC */
|
|
+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
|
|
+
|
|
+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
|
|
+
|
|
+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
|
|
+
|
|
+#define CONFIG_LTQ_SUPPORT_SPI_FLASH
|
|
+#define CONFIG_SPI_FLASH_MACRONIX /* Have a MX29LV620 serial flash */
|
|
+
|
|
+#define CONFIG_LTQ_SUPPORT_NAND_FLASH
|
|
+
|
|
+#define CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH /* Build SPI flash SPL */
|
|
+#define CONFIG_SPL_SPI_BUS 0
|
|
+#define CONFIG_SPL_SPI_CS 4
|
|
+#define CONFIG_SPL_SPI_MAX_HZ 25000000
|
|
+#define CONFIG_SPL_SPI_MODE 0
|
|
+
|
|
+#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
|
|
+
|
|
+#define CONFIG_LTQ_SUPPORT_SPL_NAND_FLASH /* Build NAND flash SPL */
|
|
+#define CONFIG_SYS_NAND_PAGE_COUNT 128
|
|
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
+#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
+#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024)
|
|
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
|
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x4000
|
|
+
|
|
+#define CONFIG_LTQ_SPL_COMP_LZO
|
|
+#define CONFIG_LTQ_SPL_CONSOLE
|
|
+
|
|
+#define CONFIG_SYS_DRAM_PROBE
|
|
+
|
|
+/* Environment */
|
|
+#define CONFIG_ENV_SPI_BUS CONFIG_SPL_SPI_BUS
|
|
+#define CONFIG_ENV_SPI_CS CONFIG_SPL_SPI_CS
|
|
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SPL_SPI_MAX_HZ
|
|
+#define CONFIG_ENV_SPI_MODE CONFIG_SPL_SPI_MODE
|
|
+
|
|
+#if defined(CONFIG_SYS_BOOT_NOR)
|
|
+#define CONFIG_ENV_IS_IN_FLASH
|
|
+#define CONFIG_ENV_OVERWRITE
|
|
+#define CONFIG_ENV_OFFSET (384 * 1024)
|
|
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
|
|
+#elif defined(CONFIG_SYS_BOOT_NORSPL)
|
|
+#define CONFIG_ENV_IS_IN_FLASH
|
|
+#define CONFIG_ENV_OVERWRITE
|
|
+#define CONFIG_ENV_OFFSET (192 * 1024)
|
|
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
|
|
+#elif defined(CONFIG_SYS_BOOT_SFSPL)
|
|
+#define CONFIG_ENV_IS_IN_SPI_FLASH
|
|
+#define CONFIG_ENV_OVERWRITE
|
|
+#define CONFIG_ENV_OFFSET (192 * 1024)
|
|
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
|
|
+#elif defined(CONFIG_SYS_BOOT_NANDSPL)
|
|
+#define CONFIG_ENV_IS_IN_NAND
|
|
+#define CONFIG_ENV_OVERWRITE
|
|
+#define CONFIG_ENV_OFFSET (256 * 1024)
|
|
+#define CONFIG_ENV_SECT_SIZE (256 * 1024)
|
|
+#else
|
|
+#define CONFIG_ENV_IS_NOWHERE
|
|
+#endif
|
|
+
|
|
+#define CONFIG_ENV_SIZE (8 * 1024)
|
|
+
|
|
+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
|
|
+
|
|
+/* Console */
|
|
+#define CONFIG_LTQ_ADVANCED_CONSOLE
|
|
+#define CONFIG_BAUDRATE 115200
|
|
+#define CONFIG_CONSOLE_ASC 1
|
|
+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
|
|
+
|
|
+/* Pull in default board configs for Lantiq XWAY VRX200 */
|
|
+#include <asm/lantiq/config.h>
|
|
+#include <asm/arch/config.h>
|
|
+
|
|
+/* Pull in default OpenWrt configs for Lantiq SoC */
|
|
+#include "openwrt-lantiq-common.h"
|
|
+
|
|
+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
|
|
+ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0"
|
|
+
|
|
+#define CONFIG_ENV_UPDATE_UBOOT_SF \
|
|
+ "update-uboot-sf=run load-uboot-sfspl-lzo write-uboot-sf\0"
|
|
+
|
|
+#define CONFIG_ENV_UPDATE_UBOOT_NAND \
|
|
+ "update-uboot-nand=run load-uboot-nandspl-lzo write-uboot-nand\0"
|
|
+
|
|
+#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
+ CONFIG_ENV_LANTIQ_DEFAULTS \
|
|
+ CONFIG_ENV_UPDATE_UBOOT_NOR \
|
|
+ CONFIG_ENV_UPDATE_UBOOT_SF \
|
|
+ CONFIG_ENV_UPDATE_UBOOT_NAND
|
|
+
|
|
+#endif /* __CONFIG_H */
|