mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
0aa6c7df60
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
56 lines
1.8 KiB
Diff
56 lines
1.8 KiB
Diff
From edb0177945936b14fe58662743f9e9d4eeba4b73 Mon Sep 17 00:00:00 2001
|
|
From: Eric Anholt <eric@anholt.net>
|
|
Date: Mon, 9 May 2016 17:28:18 -0700
|
|
Subject: [PATCH 350/381] clk: bcm2835: Mark GPIO clocks enabled at boot as
|
|
critical.
|
|
|
|
These divide off of PLLD_PER and are used for the ethernet and wifi
|
|
PHYs source PLLs. Neither of them is currently represented by a phy
|
|
device that would grab the clock for us.
|
|
|
|
This keeps other drivers from killing the networking PHYs when they
|
|
disable their own clocks and trigger PLLD_PER's refcount going to 0.
|
|
|
|
v2: Skip marking as critical if they aren't on at boot.
|
|
|
|
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
---
|
|
drivers/clk/bcm/clk-bcm2835.c | 13 ++++++++++++-
|
|
1 file changed, 12 insertions(+), 1 deletion(-)
|
|
|
|
--- a/drivers/clk/bcm/clk-bcm2835.c
|
|
+++ b/drivers/clk/bcm/clk-bcm2835.c
|
|
@@ -1250,6 +1250,15 @@ static struct clk *bcm2835_register_cloc
|
|
init.name = data->name;
|
|
init.flags = data->flags | CLK_IGNORE_UNUSED;
|
|
|
|
+ /*
|
|
+ * Some GPIO clocks for ethernet/wifi PLLs are marked as
|
|
+ * critical (since some platforms use them), but if the
|
|
+ * firmware didn't have them turned on then they clearly
|
|
+ * aren't actually critical.
|
|
+ */
|
|
+ if ((cprman_read(cprman, data->ctl_reg) & CM_ENABLE) == 0)
|
|
+ init.flags &= ~CLK_IS_CRITICAL;
|
|
+
|
|
if (data->is_vpu_clock) {
|
|
init.ops = &bcm2835_vpu_clock_clk_ops;
|
|
} else {
|
|
@@ -1724,13 +1733,15 @@ static const struct bcm2835_clk_desc clk
|
|
.div_reg = CM_GP1DIV,
|
|
.int_bits = 12,
|
|
.frac_bits = 12,
|
|
+ .flags = CLK_IS_CRITICAL,
|
|
.is_mash_clock = true),
|
|
[BCM2835_CLOCK_GP2] = REGISTER_PER_CLK(
|
|
.name = "gp2",
|
|
.ctl_reg = CM_GP2CTL,
|
|
.div_reg = CM_GP2DIV,
|
|
.int_bits = 12,
|
|
- .frac_bits = 12),
|
|
+ .frac_bits = 12,
|
|
+ .flags = CLK_IS_CRITICAL),
|
|
|
|
/* HDMI state machine */
|
|
[BCM2835_CLOCK_HSM] = REGISTER_PER_CLK(
|