mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 09:12:39 +00:00
f0a5f24217
- two upstreamed patches removed - compile tested all targets using 4.1 - run tested ar71xx Signed-off-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47694
670 lines
19 KiB
Diff
670 lines
19 KiB
Diff
From 047222cfefe97ef8706f03117bc8deada4cb4ddd Mon Sep 17 00:00:00 2001
|
|
From: Leilk Liu <leilk.liu@mediatek.com>
|
|
Date: Fri, 8 May 2015 16:55:42 +0800
|
|
Subject: [PATCH 26/76] spi: mediatek: Add spi bus for Mediatek MT8173
|
|
|
|
This patch adds basic spi bus for MT8173.
|
|
|
|
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
|
|
---
|
|
drivers/spi/Kconfig | 10 +
|
|
drivers/spi/Makefile | 1 +
|
|
drivers/spi/spi-mt65xx.c | 622 ++++++++++++++++++++++++++++++++++++++++++++++
|
|
3 files changed, 633 insertions(+)
|
|
create mode 100644 drivers/spi/spi-mt65xx.c
|
|
|
|
--- a/drivers/spi/Kconfig
|
|
+++ b/drivers/spi/Kconfig
|
|
@@ -334,6 +334,16 @@ config SPI_MESON_SPIFC
|
|
This enables master mode support for the SPIFC (SPI flash
|
|
controller) available in Amlogic Meson SoCs.
|
|
|
|
+config SPI_MT65XX
|
|
+ tristate "MediaTek SPI controller"
|
|
+ depends on ARCH_MEDIATEK || COMPILE_TEST
|
|
+ select SPI_BITBANG
|
|
+ help
|
|
+ This selects the MediaTek(R) SPI bus driver.
|
|
+ If you want to use MediaTek(R) SPI interface,
|
|
+ say Y or M here.If you are not sure, say N.
|
|
+ SPI drivers for Mediatek mt65XX series ARM SoCs.
|
|
+
|
|
config SPI_OC_TINY
|
|
tristate "OpenCores tiny SPI"
|
|
depends on GPIOLIB
|
|
--- a/drivers/spi/Makefile
|
|
+++ b/drivers/spi/Makefile
|
|
@@ -49,6 +49,7 @@ obj-$(CONFIG_SPI_MESON_SPIFC) += spi-me
|
|
obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o
|
|
obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o
|
|
obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o
|
|
+obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o
|
|
obj-$(CONFIG_SPI_MXS) += spi-mxs.o
|
|
obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o
|
|
obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o
|
|
--- /dev/null
|
|
+++ b/drivers/spi/spi-mt65xx.c
|
|
@@ -0,0 +1,622 @@
|
|
+/*
|
|
+ * Copyright (c) 2015 MediaTek Inc.
|
|
+ * Author: Leilk Liu <leilk.liu@mediatek.com>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/errno.h>
|
|
+#include <linux/spi/spi.h>
|
|
+#include <linux/workqueue.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/irqreturn.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/of.h>
|
|
+#include <linux/of_irq.h>
|
|
+#include <linux/of_address.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/spi/spi_bitbang.h>
|
|
+#include <linux/gpio.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/of_gpio.h>
|
|
+
|
|
+#define SPI_CFG0_REG 0x0000
|
|
+#define SPI_CFG1_REG 0x0004
|
|
+#define SPI_TX_SRC_REG 0x0008
|
|
+#define SPI_RX_DST_REG 0x000c
|
|
+#define SPI_CMD_REG 0x0018
|
|
+#define SPI_STATUS0_REG 0x001c
|
|
+#define SPI_PAD_SEL_REG 0x0024
|
|
+
|
|
+#define SPI_CFG0_SCK_HIGH_OFFSET 0
|
|
+#define SPI_CFG0_SCK_LOW_OFFSET 8
|
|
+#define SPI_CFG0_CS_HOLD_OFFSET 16
|
|
+#define SPI_CFG0_CS_SETUP_OFFSET 24
|
|
+
|
|
+#define SPI_CFG0_SCK_HIGH_MASK 0xff
|
|
+#define SPI_CFG0_SCK_LOW_MASK 0xff00
|
|
+#define SPI_CFG0_CS_HOLD_MASK 0xff0000
|
|
+#define SPI_CFG0_CS_SETUP_MASK 0xff000000
|
|
+
|
|
+#define SPI_CFG1_CS_IDLE_OFFSET 0
|
|
+#define SPI_CFG1_PACKET_LOOP_OFFSET 8
|
|
+#define SPI_CFG1_PACKET_LENGTH_OFFSET 16
|
|
+#define SPI_CFG1_GET_TICK_DLY_OFFSET 30
|
|
+
|
|
+#define SPI_CFG1_CS_IDLE_MASK 0xff
|
|
+#define SPI_CFG1_PACKET_LOOP_MASK 0xff00
|
|
+#define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000
|
|
+#define SPI_CFG1_GET_TICK_DLY_MASK 0xc0000000
|
|
+
|
|
+#define SPI_CMD_ACT_OFFSET 0
|
|
+#define SPI_CMD_RESUME_OFFSET 1
|
|
+#define SPI_CMD_RST_OFFSET 2
|
|
+#define SPI_CMD_PAUSE_EN_OFFSET 4
|
|
+#define SPI_CMD_DEASSERT_OFFSET 5
|
|
+#define SPI_CMD_CPHA_OFFSET 8
|
|
+#define SPI_CMD_CPOL_OFFSET 9
|
|
+#define SPI_CMD_RX_DMA_OFFSET 10
|
|
+#define SPI_CMD_TX_DMA_OFFSET 11
|
|
+#define SPI_CMD_TXMSBF_OFFSET 12
|
|
+#define SPI_CMD_RXMSBF_OFFSET 13
|
|
+#define SPI_CMD_RX_ENDIAN_OFFSET 14
|
|
+#define SPI_CMD_TX_ENDIAN_OFFSET 15
|
|
+#define SPI_CMD_FINISH_IE_OFFSET 16
|
|
+#define SPI_CMD_PAUSE_IE_OFFSET 17
|
|
+
|
|
+#define SPI_CMD_RESUME_MASK 0x2
|
|
+#define SPI_CMD_RST_MASK 0x4
|
|
+#define SPI_CMD_PAUSE_EN_MASK 0x10
|
|
+#define SPI_CMD_DEASSERT_MASK 0x20
|
|
+#define SPI_CMD_CPHA_MASK 0x100
|
|
+#define SPI_CMD_CPOL_MASK 0x200
|
|
+#define SPI_CMD_RX_DMA_MASK 0x400
|
|
+#define SPI_CMD_TX_DMA_MASK 0x800
|
|
+#define SPI_CMD_TXMSBF_MASK 0x1000
|
|
+#define SPI_CMD_RXMSBF_MASK 0x2000
|
|
+#define SPI_CMD_RX_ENDIAN_MASK 0x4000
|
|
+#define SPI_CMD_TX_ENDIAN_MASK 0x8000
|
|
+#define SPI_CMD_FINISH_IE_MASK 0x10000
|
|
+
|
|
+#define COMPAT_MT6589 (0x1 << 0)
|
|
+#define COMPAT_MT8173 (0x1 << 1)
|
|
+
|
|
+#define MT8173_MAX_PAD_SEL 3
|
|
+
|
|
+#define IDLE 0
|
|
+#define INPROGRESS 1
|
|
+#define PAUSED 2
|
|
+
|
|
+#define PACKET_SIZE 1024
|
|
+
|
|
+struct mtk_chip_config {
|
|
+ u32 setuptime;
|
|
+ u32 holdtime;
|
|
+ u32 high_time;
|
|
+ u32 low_time;
|
|
+ u32 cs_idletime;
|
|
+ u32 tx_mlsb;
|
|
+ u32 rx_mlsb;
|
|
+ u32 tx_endian;
|
|
+ u32 rx_endian;
|
|
+ u32 pause;
|
|
+ u32 finish_intr;
|
|
+ u32 deassert;
|
|
+ u32 tckdly;
|
|
+};
|
|
+
|
|
+struct mtk_spi_ddata {
|
|
+ struct spi_bitbang bitbang;
|
|
+ void __iomem *base;
|
|
+ u32 irq;
|
|
+ u32 state;
|
|
+ u32 platform_compat;
|
|
+ u32 pad_sel;
|
|
+ struct clk *clk;
|
|
+
|
|
+ const u8 *tx_buf;
|
|
+ u8 *rx_buf;
|
|
+ u32 tx_len, rx_len;
|
|
+ struct completion done;
|
|
+};
|
|
+
|
|
+/*
|
|
+ * A piece of default chip info unless the platform
|
|
+ * supplies it.
|
|
+ */
|
|
+static const struct mtk_chip_config mtk_default_chip_info = {
|
|
+ .setuptime = 10,
|
|
+ .holdtime = 12,
|
|
+ .high_time = 6,
|
|
+ .low_time = 6,
|
|
+ .cs_idletime = 12,
|
|
+ .rx_mlsb = 1,
|
|
+ .tx_mlsb = 1,
|
|
+ .tx_endian = 0,
|
|
+ .rx_endian = 0,
|
|
+ .pause = 0,
|
|
+ .finish_intr = 1,
|
|
+ .deassert = 0,
|
|
+ .tckdly = 0,
|
|
+};
|
|
+
|
|
+static const struct of_device_id mtk_spi_of_match[] = {
|
|
+ { .compatible = "mediatek,mt6589-spi", .data = (void *)COMPAT_MT6589},
|
|
+ { .compatible = "mediatek,mt8173-spi", .data = (void *)COMPAT_MT8173},
|
|
+ {}
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, mtk_spi_of_match);
|
|
+
|
|
+static void mtk_spi_reset(struct mtk_spi_ddata *mdata)
|
|
+{
|
|
+ u32 reg_val;
|
|
+
|
|
+ /*set the software reset bit in SPI_CMD_REG.*/
|
|
+ reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
+ reg_val &= ~SPI_CMD_RST_MASK;
|
|
+ reg_val |= 1 << SPI_CMD_RST_OFFSET;
|
|
+ writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
+ reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
+ reg_val &= ~SPI_CMD_RST_MASK;
|
|
+ writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
+}
|
|
+
|
|
+static void mtk_set_pause_bit(struct mtk_spi_ddata *mdata)
|
|
+{
|
|
+ u32 reg_val;
|
|
+
|
|
+ reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
+ reg_val |= 1 << SPI_CMD_PAUSE_EN_OFFSET;
|
|
+ reg_val |= 1 << SPI_CMD_PAUSE_IE_OFFSET;
|
|
+ writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
+}
|
|
+
|
|
+static void mtk_clear_pause_bit(struct mtk_spi_ddata *mdata)
|
|
+{
|
|
+ u32 reg_val;
|
|
+
|
|
+ reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
+ reg_val &= ~SPI_CMD_PAUSE_EN_MASK;
|
|
+ writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
+}
|
|
+
|
|
+static int mtk_spi_config(struct mtk_spi_ddata *mdata,
|
|
+ struct mtk_chip_config *chip_config)
|
|
+{
|
|
+ u32 reg_val;
|
|
+
|
|
+ /* set the timing */
|
|
+ reg_val = readl(mdata->base + SPI_CFG0_REG);
|
|
+ reg_val &= ~(SPI_CFG0_SCK_HIGH_MASK | SPI_CFG0_SCK_LOW_MASK);
|
|
+ reg_val &= ~(SPI_CFG0_CS_HOLD_MASK | SPI_CFG0_CS_SETUP_MASK);
|
|
+ reg_val |= ((chip_config->high_time - 1) << SPI_CFG0_SCK_HIGH_OFFSET);
|
|
+ reg_val |= ((chip_config->low_time - 1) << SPI_CFG0_SCK_LOW_OFFSET);
|
|
+ reg_val |= ((chip_config->holdtime - 1) << SPI_CFG0_CS_HOLD_OFFSET);
|
|
+ reg_val |= ((chip_config->setuptime - 1) << SPI_CFG0_CS_SETUP_OFFSET);
|
|
+ writel(reg_val, mdata->base + SPI_CFG0_REG);
|
|
+
|
|
+ reg_val = readl(mdata->base + SPI_CFG1_REG);
|
|
+ reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
|
|
+ reg_val |= ((chip_config->cs_idletime - 1) << SPI_CFG1_CS_IDLE_OFFSET);
|
|
+ reg_val &= ~SPI_CFG1_GET_TICK_DLY_MASK;
|
|
+ reg_val |= ((chip_config->tckdly) << SPI_CFG1_GET_TICK_DLY_OFFSET);
|
|
+ writel(reg_val, mdata->base + SPI_CFG1_REG);
|
|
+
|
|
+ /* set the mlsbx and mlsbtx */
|
|
+ reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
+ reg_val &= ~(SPI_CMD_TX_ENDIAN_MASK | SPI_CMD_RX_ENDIAN_MASK);
|
|
+ reg_val &= ~(SPI_CMD_TXMSBF_MASK | SPI_CMD_RXMSBF_MASK);
|
|
+ reg_val |= (chip_config->tx_mlsb << SPI_CMD_TXMSBF_OFFSET);
|
|
+ reg_val |= (chip_config->rx_mlsb << SPI_CMD_RXMSBF_OFFSET);
|
|
+ reg_val |= (chip_config->tx_endian << SPI_CMD_TX_ENDIAN_OFFSET);
|
|
+ reg_val |= (chip_config->rx_endian << SPI_CMD_RX_ENDIAN_OFFSET);
|
|
+ writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
+
|
|
+ /* set finish and pause interrupt always enable */
|
|
+ reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
+ reg_val &= ~SPI_CMD_FINISH_IE_MASK;
|
|
+ reg_val |= (chip_config->finish_intr << SPI_CMD_FINISH_IE_OFFSET);
|
|
+ writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
+
|
|
+ reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
+ reg_val |= 1 << SPI_CMD_TX_DMA_OFFSET;
|
|
+ reg_val |= 1 << SPI_CMD_RX_DMA_OFFSET;
|
|
+ writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
+
|
|
+ /* set deassert mode */
|
|
+ reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
+ reg_val &= ~SPI_CMD_DEASSERT_MASK;
|
|
+ reg_val |= (chip_config->deassert << SPI_CMD_DEASSERT_OFFSET);
|
|
+ writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
+
|
|
+ /* pad select */
|
|
+ if (mdata->platform_compat & COMPAT_MT8173)
|
|
+ writel(mdata->pad_sel, mdata->base + SPI_PAD_SEL_REG);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int mtk_spi_setup_transfer(struct spi_device *spi,
|
|
+ struct spi_transfer *t)
|
|
+{
|
|
+ u32 reg_val;
|
|
+ struct spi_master *master = spi->master;
|
|
+ struct mtk_spi_ddata *mdata = spi_master_get_devdata(master);
|
|
+ struct spi_message *m = master->cur_msg;
|
|
+ struct mtk_chip_config *chip_config;
|
|
+
|
|
+ u8 cpha = spi->mode & SPI_CPHA ? 1 : 0;
|
|
+ u8 cpol = spi->mode & SPI_CPOL ? 1 : 0;
|
|
+
|
|
+ reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
+ reg_val &= ~(SPI_CMD_CPHA_MASK | SPI_CMD_CPOL_MASK);
|
|
+ reg_val |= (cpha << SPI_CMD_CPHA_OFFSET);
|
|
+ reg_val |= (cpol << SPI_CMD_CPOL_OFFSET);
|
|
+ writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
+
|
|
+ if (t->cs_change) {
|
|
+ if (!(list_is_last(&t->transfer_list, &m->transfers)))
|
|
+ mdata->state = IDLE;
|
|
+ } else {
|
|
+ mdata->state = IDLE;
|
|
+ mtk_spi_reset(mdata);
|
|
+ }
|
|
+
|
|
+ chip_config = (struct mtk_chip_config *)spi->controller_data;
|
|
+ if (!chip_config) {
|
|
+ chip_config = (void *)&mtk_default_chip_info;
|
|
+ spi->controller_data = chip_config;
|
|
+ mdata->state = IDLE;
|
|
+ }
|
|
+
|
|
+ mtk_spi_config(mdata, chip_config);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void mtk_spi_chipselect(struct spi_device *spi, int is_on)
|
|
+{
|
|
+ struct mtk_spi_ddata *mdata = spi_master_get_devdata(spi->master);
|
|
+
|
|
+ switch (is_on) {
|
|
+ case BITBANG_CS_ACTIVE:
|
|
+ mtk_set_pause_bit(mdata);
|
|
+ break;
|
|
+ case BITBANG_CS_INACTIVE:
|
|
+ mtk_clear_pause_bit(mdata);
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void mtk_spi_start_transfer(struct mtk_spi_ddata *mdata)
|
|
+{
|
|
+ u32 reg_val;
|
|
+
|
|
+ reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
+ reg_val |= 1 << SPI_CMD_ACT_OFFSET;
|
|
+ writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
+}
|
|
+
|
|
+static void mtk_spi_resume_transfer(struct mtk_spi_ddata *mdata)
|
|
+{
|
|
+ u32 reg_val;
|
|
+
|
|
+ reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
+ reg_val &= ~SPI_CMD_RESUME_MASK;
|
|
+ reg_val |= 1 << SPI_CMD_RESUME_OFFSET;
|
|
+ writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
+}
|
|
+
|
|
+static int mtk_spi_setup_packet(struct mtk_spi_ddata *mdata,
|
|
+ struct spi_transfer *xfer)
|
|
+{
|
|
+ struct device *dev = &mdata->bitbang.master->dev;
|
|
+ u32 packet_size, packet_loop, reg_val;
|
|
+
|
|
+ packet_size = min_t(unsigned, xfer->len, PACKET_SIZE);
|
|
+
|
|
+ /* mtk hw has the restriction that xfer len must be a multiple of 1024,
|
|
+ * when it is greater than 1024bytes.
|
|
+ */
|
|
+ if (xfer->len % packet_size) {
|
|
+ dev_err(dev, "ERROR!The lens must be a multiple of %d, your len %d\n",
|
|
+ PACKET_SIZE, xfer->len);
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ packet_loop = xfer->len / packet_size;
|
|
+
|
|
+ reg_val = readl(mdata->base + SPI_CFG1_REG);
|
|
+ reg_val &= ~(SPI_CFG1_PACKET_LENGTH_MASK + SPI_CFG1_PACKET_LOOP_MASK);
|
|
+ reg_val |= (packet_size - 1) << SPI_CFG1_PACKET_LENGTH_OFFSET;
|
|
+ reg_val |= (packet_loop - 1) << SPI_CFG1_PACKET_LOOP_OFFSET;
|
|
+ writel(reg_val, mdata->base + SPI_CFG1_REG);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int mtk_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *xfer)
|
|
+{
|
|
+ struct spi_master *master = spi->master;
|
|
+ struct mtk_spi_ddata *mdata = spi_master_get_devdata(master);
|
|
+ struct device *dev = &mdata->bitbang.master->dev;
|
|
+ int cmd, ret;
|
|
+
|
|
+ /* mtk spi hw tx/rx have 4bytes aligned restriction,
|
|
+ * so kmalloc tx/rx buffer to workaround here.
|
|
+ */
|
|
+ mdata->tx_buf = NULL;
|
|
+ mdata->rx_buf = NULL;
|
|
+ if (xfer->tx_buf) {
|
|
+ mdata->tx_buf = kmalloc(xfer->len, GFP_KERNEL);
|
|
+ if (!mdata->tx_buf) {
|
|
+ dev_err(dev, "malloc tx_buf failed.\n");
|
|
+ ret = -ENOMEM;
|
|
+ goto err_free;
|
|
+ }
|
|
+ memcpy((void *)mdata->tx_buf, xfer->tx_buf, xfer->len);
|
|
+ }
|
|
+ if (xfer->rx_buf) {
|
|
+ mdata->rx_buf = kmalloc(xfer->len, GFP_KERNEL);
|
|
+ if (!mdata->rx_buf) {
|
|
+ dev_err(dev, "malloc rx_buf failed.\n");
|
|
+ ret = -ENOMEM;
|
|
+ goto err_free;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ reinit_completion(&mdata->done);
|
|
+
|
|
+ xfer->tx_dma = DMA_ERROR_CODE;
|
|
+ xfer->rx_dma = DMA_ERROR_CODE;
|
|
+ if (xfer->tx_buf) {
|
|
+ xfer->tx_dma = dma_map_single(dev, (void *)mdata->tx_buf,
|
|
+ xfer->len, DMA_TO_DEVICE);
|
|
+ if (dma_mapping_error(dev, xfer->tx_dma)) {
|
|
+ dev_err(dev, "dma mapping tx_buf error.\n");
|
|
+ ret = -ENOMEM;
|
|
+ goto err_free;
|
|
+ }
|
|
+ }
|
|
+ if (xfer->rx_buf) {
|
|
+ xfer->rx_dma = dma_map_single(dev, mdata->rx_buf,
|
|
+ xfer->len, DMA_FROM_DEVICE);
|
|
+ if (dma_mapping_error(dev, xfer->rx_dma)) {
|
|
+ if (xfer->tx_buf)
|
|
+ dma_unmap_single(dev, xfer->tx_dma,
|
|
+ xfer->len, DMA_TO_DEVICE);
|
|
+ dev_err(dev, "dma mapping rx_buf error.\n");
|
|
+ ret = -ENOMEM;
|
|
+ goto err_free;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ ret = mtk_spi_setup_packet(mdata, xfer);
|
|
+ if (ret != 0)
|
|
+ goto err_free;
|
|
+
|
|
+ /* Here is mt8173 HW issue: RX must enable TX, then TX transfer
|
|
+ * dummy data; TX don't need to enable RX. so enable TX dma for
|
|
+ * RX to workaround.
|
|
+ */
|
|
+ cmd = readl(mdata->base + SPI_CMD_REG);
|
|
+ if (xfer->tx_buf || (mdata->platform_compat & COMPAT_MT8173))
|
|
+ cmd |= 1 << SPI_CMD_TX_DMA_OFFSET;
|
|
+ if (xfer->rx_buf)
|
|
+ cmd |= 1 << SPI_CMD_RX_DMA_OFFSET;
|
|
+ writel(cmd, mdata->base + SPI_CMD_REG);
|
|
+
|
|
+ /* set up the DMA bus address */
|
|
+ if (xfer->tx_dma != DMA_ERROR_CODE)
|
|
+ writel(cpu_to_le32(xfer->tx_dma), mdata->base + SPI_TX_SRC_REG);
|
|
+ if (xfer->rx_dma != DMA_ERROR_CODE)
|
|
+ writel(cpu_to_le32(xfer->rx_dma), mdata->base + SPI_RX_DST_REG);
|
|
+
|
|
+ if (mdata->state == IDLE)
|
|
+ mtk_spi_start_transfer(mdata);
|
|
+ else if (mdata->state == PAUSED)
|
|
+ mtk_spi_resume_transfer(mdata);
|
|
+ else
|
|
+ mdata->state = INPROGRESS;
|
|
+
|
|
+ wait_for_completion(&mdata->done);
|
|
+
|
|
+ if (xfer->tx_dma != DMA_ERROR_CODE) {
|
|
+ dma_unmap_single(dev, xfer->tx_dma, xfer->len, DMA_TO_DEVICE);
|
|
+ xfer->tx_dma = DMA_ERROR_CODE;
|
|
+ }
|
|
+ if (xfer->rx_dma != DMA_ERROR_CODE) {
|
|
+ dma_unmap_single(dev, xfer->rx_dma, xfer->len, DMA_FROM_DEVICE);
|
|
+ xfer->rx_dma = DMA_ERROR_CODE;
|
|
+ }
|
|
+
|
|
+ /* spi disable dma */
|
|
+ cmd = readl(mdata->base + SPI_CMD_REG);
|
|
+ cmd &= ~SPI_CMD_TX_DMA_MASK;
|
|
+ cmd &= ~SPI_CMD_RX_DMA_MASK;
|
|
+ writel(cmd, mdata->base + SPI_CMD_REG);
|
|
+
|
|
+ if (xfer->rx_buf)
|
|
+ memcpy(xfer->rx_buf, mdata->rx_buf, xfer->len);
|
|
+
|
|
+ ret = xfer->len;
|
|
+
|
|
+err_free:
|
|
+ kfree(mdata->tx_buf);
|
|
+ kfree(mdata->rx_buf);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct mtk_spi_ddata *mdata = dev_id;
|
|
+ u32 reg_val;
|
|
+
|
|
+ reg_val = readl(mdata->base + SPI_STATUS0_REG);
|
|
+ if (reg_val & 0x2)
|
|
+ mdata->state = PAUSED;
|
|
+ else
|
|
+ mdata->state = IDLE;
|
|
+ complete(&mdata->done);
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static unsigned long mtk_get_device_prop(struct platform_device *pdev)
|
|
+{
|
|
+ const struct of_device_id *match;
|
|
+
|
|
+ match = of_match_node(mtk_spi_of_match, pdev->dev.of_node);
|
|
+ return (unsigned long)match->data;
|
|
+}
|
|
+
|
|
+static int mtk_spi_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct spi_master *master;
|
|
+ struct mtk_spi_ddata *mdata;
|
|
+ struct resource *res;
|
|
+ int ret;
|
|
+
|
|
+ master = spi_alloc_master(&pdev->dev, sizeof(struct mtk_spi_ddata));
|
|
+ if (!master) {
|
|
+ dev_err(&pdev->dev, "failed to alloc spi master\n");
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+
|
|
+ platform_set_drvdata(pdev, master);
|
|
+
|
|
+ master->dev.of_node = pdev->dev.of_node;
|
|
+ master->bus_num = pdev->id;
|
|
+ master->num_chipselect = 1;
|
|
+ master->mode_bits = SPI_CPOL | SPI_CPHA;
|
|
+
|
|
+ mdata = spi_master_get_devdata(master);
|
|
+
|
|
+ mdata->bitbang.master = master;
|
|
+ mdata->bitbang.chipselect = mtk_spi_chipselect;
|
|
+ mdata->bitbang.setup_transfer = mtk_spi_setup_transfer;
|
|
+ mdata->bitbang.txrx_bufs = mtk_spi_txrx_bufs;
|
|
+ mdata->platform_compat = mtk_get_device_prop(pdev);
|
|
+
|
|
+ if (mdata->platform_compat & COMPAT_MT8173) {
|
|
+ ret = of_property_read_u32(pdev->dev.of_node, "pad-select",
|
|
+ &mdata->pad_sel);
|
|
+ if (ret) {
|
|
+ dev_err(&pdev->dev, "failed to read pad select: %d\n",
|
|
+ ret);
|
|
+ goto err;
|
|
+ }
|
|
+
|
|
+ if (mdata->pad_sel > MT8173_MAX_PAD_SEL) {
|
|
+ dev_err(&pdev->dev, "wrong pad-select: %u\n",
|
|
+ mdata->pad_sel);
|
|
+ goto err;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ init_completion(&mdata->done);
|
|
+
|
|
+ mdata->clk = devm_clk_get(&pdev->dev, "main");
|
|
+ if (IS_ERR(mdata->clk)) {
|
|
+ ret = PTR_ERR(mdata->clk);
|
|
+ dev_err(&pdev->dev, "failed to get clock: %d\n", ret);
|
|
+ goto err;
|
|
+ }
|
|
+
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!res) {
|
|
+ ret = -ENODEV;
|
|
+ dev_err(&pdev->dev, "failed to determine base address\n");
|
|
+ goto err;
|
|
+ }
|
|
+
|
|
+ mdata->base = devm_ioremap_resource(&pdev->dev, res);
|
|
+ if (IS_ERR(mdata->base)) {
|
|
+ ret = PTR_ERR(mdata->base);
|
|
+ goto err;
|
|
+ }
|
|
+
|
|
+ ret = platform_get_irq(pdev, 0);
|
|
+ if (ret < 0) {
|
|
+ dev_err(&pdev->dev, "failed to get irq (%d)\n", ret);
|
|
+ goto err;
|
|
+ }
|
|
+
|
|
+ mdata->irq = ret;
|
|
+
|
|
+ if (!pdev->dev.dma_mask)
|
|
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
|
|
+
|
|
+ mdata->bitbang.master->dev.dma_mask = pdev->dev.dma_mask;
|
|
+
|
|
+ ret = clk_prepare_enable(mdata->clk);
|
|
+ if (ret < 0) {
|
|
+ dev_err(&pdev->dev, "failed to enable clock (%d)\n", ret);
|
|
+ goto err;
|
|
+ }
|
|
+
|
|
+ ret = devm_request_irq(&pdev->dev, mdata->irq, mtk_spi_interrupt,
|
|
+ IRQF_TRIGGER_NONE, dev_name(&pdev->dev), mdata);
|
|
+ if (ret) {
|
|
+ dev_err(&pdev->dev, "failed to register irq (%d)\n", ret);
|
|
+ goto err_disable_clk;
|
|
+ }
|
|
+
|
|
+ ret = spi_bitbang_start(&mdata->bitbang);
|
|
+ if (ret) {
|
|
+ dev_err(&pdev->dev, "spi_bitbang_start failed (%d)\n", ret);
|
|
+err_disable_clk:
|
|
+ clk_disable_unprepare(mdata->clk);
|
|
+err:
|
|
+ spi_master_put(master);
|
|
+ }
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int mtk_spi_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct spi_master *master = platform_get_drvdata(pdev);
|
|
+ struct mtk_spi_ddata *mdata = spi_master_get_devdata(master);
|
|
+
|
|
+ spi_bitbang_stop(&mdata->bitbang);
|
|
+ mtk_spi_reset(mdata);
|
|
+ clk_disable_unprepare(mdata->clk);
|
|
+ spi_master_put(master);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+struct platform_driver mtk_spi_driver = {
|
|
+ .driver = {
|
|
+ .name = "mtk-spi",
|
|
+ .of_match_table = mtk_spi_of_match,
|
|
+ },
|
|
+ .probe = mtk_spi_probe,
|
|
+ .remove = mtk_spi_remove,
|
|
+};
|
|
+
|
|
+module_platform_driver(mtk_spi_driver);
|
|
+
|
|
+MODULE_DESCRIPTION("MTK SPI Controller driver");
|
|
+MODULE_AUTHOR("Leilk Liu <leilk.liu@mediatek.com>");
|
|
+MODULE_LICENSE("GPL v2");
|
|
+MODULE_ALIAS("platform: mtk_spi");
|