mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 17:01:14 +00:00
f07e572f64
bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G bcm2710: boot tested on RPi 3B v1.2 bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
632 lines
12 KiB
Diff
632 lines
12 KiB
Diff
From 104dcc1aff0ae5509ad9875c11e3e0d8c290709d Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Tue, 2 Jun 2020 17:19:51 +0100
|
|
Subject: [PATCH] ARM: dts: Add bcm2711-rpi-cm4.dts
|
|
|
|
Add initial DTS file for Compute Module 4.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 3 +-
|
|
arch/arm/boot/dts/bcm2711-rpi-cm4.dts | 586 ++++++++++++++++++++++++++
|
|
arch/arm/boot/dts/overlays/README | 6 +
|
|
3 files changed, 594 insertions(+), 1 deletion(-)
|
|
create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4.dts
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -12,7 +12,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
|
|
bcm2710-rpi-3-b.dtb \
|
|
bcm2711-rpi-4-b.dtb \
|
|
bcm2710-rpi-3-b-plus.dtb \
|
|
- bcm2710-rpi-cm3.dtb
|
|
+ bcm2710-rpi-cm3.dtb \
|
|
+ bcm2711-rpi-cm4.dtb
|
|
|
|
dtb-$(CONFIG_ARCH_ALPINE) += \
|
|
alpine-db.dtb
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
|
|
@@ -0,0 +1,586 @@
|
|
+// SPDX-License-Identifier: GPL-2.0
|
|
+/dts-v1/;
|
|
+#include "bcm2711.dtsi"
|
|
+#include "bcm2835-rpi.dtsi"
|
|
+
|
|
+/ {
|
|
+ compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
|
|
+ model = "Raspberry Pi Compute Module 4";
|
|
+
|
|
+ chosen {
|
|
+ /* 8250 auxiliary UART instead of pl011 */
|
|
+ stdout-path = "serial1:115200n8";
|
|
+ };
|
|
+
|
|
+ /* Will be filled by the bootloader */
|
|
+ memory@0 {
|
|
+ device_type = "memory";
|
|
+ reg = <0 0 0>;
|
|
+ };
|
|
+
|
|
+ aliases {
|
|
+ ethernet0 = &genet;
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ act {
|
|
+ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+
|
|
+ pwr {
|
|
+ label = "PWR";
|
|
+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ wifi_pwrseq: wifi-pwrseq {
|
|
+ compatible = "mmc-pwrseq-simple";
|
|
+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ sd_io_1v8_reg: sd_io_1v8_reg {
|
|
+ compatible = "regulator-gpio";
|
|
+ regulator-name = "vdd-sd-io";
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ regulator-settling-time-us = <5000>;
|
|
+ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
|
|
+ states = <1800000 0x1
|
|
+ 3300000 0x0>;
|
|
+ status = "okay";
|
|
+ };
|
|
+};
|
|
+
|
|
+&firmware {
|
|
+ expgpio: gpio {
|
|
+ compatible = "raspberrypi,firmware-gpio";
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ gpio-line-names = "BT_ON",
|
|
+ "WL_ON",
|
|
+ "PWR_LED_OFF",
|
|
+ "ANT1",
|
|
+ "VDD_SD_IO_SEL",
|
|
+ "CAM_GPIO",
|
|
+ "SD_PWR_ON",
|
|
+ "ANT2";
|
|
+ status = "okay";
|
|
+
|
|
+ ant1: ant1 {
|
|
+ gpio-hog;
|
|
+ gpios = <3 GPIO_ACTIVE_HIGH>;
|
|
+ output-high;
|
|
+ };
|
|
+
|
|
+ ant2: ant2 {
|
|
+ gpio-hog;
|
|
+ gpios = <7 GPIO_ACTIVE_HIGH>;
|
|
+ output-low;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&pwm1 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+/* SDHCI is used to control the SDIO for wireless */
|
|
+&sdhci {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&emmc_gpio34>;
|
|
+ bus-width = <4>;
|
|
+ non-removable;
|
|
+ mmc-pwrseq = <&wifi_pwrseq>;
|
|
+ status = "okay";
|
|
+
|
|
+ brcmf: wifi@1 {
|
|
+ reg = <1>;
|
|
+ compatible = "brcm,bcm4329-fmac";
|
|
+ };
|
|
+};
|
|
+
|
|
+/* EMMC2 is used to drive the SD card */
|
|
+&emmc2 {
|
|
+ vqmmc-supply = <&sd_io_1v8_reg>;
|
|
+ broken-cd;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&genet {
|
|
+ phy-handle = <&phy1>;
|
|
+ phy-mode = "rgmii-rxid";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&genet_mdio {
|
|
+ phy1: ethernet-phy@1 {
|
|
+ /* No PHY interrupt */
|
|
+ reg = <0x1>;
|
|
+ };
|
|
+};
|
|
+
|
|
+/* uart0 communicates with the BT module */
|
|
+&uart0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
|
|
+ uart-has-rtscts;
|
|
+ status = "okay";
|
|
+
|
|
+ bluetooth {
|
|
+ compatible = "brcm,bcm43438-bt";
|
|
+ max-speed = <2000000>;
|
|
+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+};
|
|
+
|
|
+/* uart1 is mapped to the pin header */
|
|
+&uart1 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart1_gpio14>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&vchiq {
|
|
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
+};
|
|
+
|
|
+&vc4 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&pixelvalve0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&pixelvalve1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&pixelvalve2 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&pixelvalve3 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&pixelvalve4 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&hdmi0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ddc0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&hdmi1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ddc1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+// =============================================
|
|
+// Downstream rpi- changes
|
|
+
|
|
+#include "bcm270x.dtsi"
|
|
+
|
|
+/ {
|
|
+ soc {
|
|
+ /delete-node/ pixelvalve@7e807000;
|
|
+ /delete-node/ hdmi@7e902000;
|
|
+ };
|
|
+};
|
|
+
|
|
+#include "bcm2711-rpi.dtsi"
|
|
+#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
+#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
|
|
+
|
|
+/delete-node/ &emmc2;
|
|
+
|
|
+/ {
|
|
+ chosen {
|
|
+ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1";
|
|
+ };
|
|
+
|
|
+ aliases {
|
|
+ serial0 = &uart1;
|
|
+ serial1 = &uart0;
|
|
+ mmc0 = &emmc2;
|
|
+ mmc1 = &mmcnr;
|
|
+ mmc2 = &sdhost;
|
|
+ /delete-property/ i2c2;
|
|
+ i2c3 = &i2c3;
|
|
+ i2c4 = &i2c4;
|
|
+ i2c5 = &i2c5;
|
|
+ i2c6 = &i2c6;
|
|
+ /delete-property/ ethernet;
|
|
+ /delete-property/ intc;
|
|
+ pcie0 = &pcie0;
|
|
+ emmc2bus = &emmc2bus;
|
|
+ };
|
|
+
|
|
+ emmc2bus: emmc2bus {
|
|
+ compatible = "simple-bus";
|
|
+ #address-cells = <2>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>;
|
|
+ dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>;
|
|
+
|
|
+ emmc2: emmc2@7e340000 {
|
|
+ compatible = "brcm,bcm2711-emmc2";
|
|
+ status = "okay";
|
|
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ clocks = <&clocks BCM2711_CLOCK_EMMC2>;
|
|
+ reg = <0x0 0x7e340000 0x100>;
|
|
+ vqmmc-supply = <&sd_io_1v8_reg>;
|
|
+ broken-cd;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /delete-node/ wifi-pwrseq;
|
|
+};
|
|
+
|
|
+&mmcnr {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sdio_pins>;
|
|
+ bus-width = <4>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart0 {
|
|
+ pinctrl-0 = <&uart0_pins &bt_pins>;
|
|
+ status = "okay";
|
|
+
|
|
+ /delete-node/ bluetooth;
|
|
+};
|
|
+
|
|
+&uart1 {
|
|
+ pinctrl-0 = <&uart1_pins>;
|
|
+};
|
|
+
|
|
+&spi0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
|
|
+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
|
|
+
|
|
+ spidev0: spidev@0{
|
|
+ compatible = "spidev";
|
|
+ reg = <0>; /* CE0 */
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ spi-max-frequency = <125000000>;
|
|
+ };
|
|
+
|
|
+ spidev1: spidev@1{
|
|
+ compatible = "spidev";
|
|
+ reg = <1>; /* CE1 */
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ spi-max-frequency = <125000000>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&gpio {
|
|
+ spi0_pins: spi0_pins {
|
|
+ brcm,pins = <9 10 11>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT0>;
|
|
+ };
|
|
+
|
|
+ spi0_cs_pins: spi0_cs_pins {
|
|
+ brcm,pins = <8 7>;
|
|
+ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
|
+ };
|
|
+
|
|
+ spi3_pins: spi3_pins {
|
|
+ brcm,pins = <1 2 3>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT3>;
|
|
+ };
|
|
+
|
|
+ spi3_cs_pins: spi3_cs_pins {
|
|
+ brcm,pins = <0 24>;
|
|
+ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
|
+ };
|
|
+
|
|
+ spi4_pins: spi4_pins {
|
|
+ brcm,pins = <5 6 7>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT3>;
|
|
+ };
|
|
+
|
|
+ spi4_cs_pins: spi4_cs_pins {
|
|
+ brcm,pins = <4 25>;
|
|
+ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
|
+ };
|
|
+
|
|
+ spi5_pins: spi5_pins {
|
|
+ brcm,pins = <13 14 15>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT3>;
|
|
+ };
|
|
+
|
|
+ spi5_cs_pins: spi5_cs_pins {
|
|
+ brcm,pins = <12 26>;
|
|
+ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
|
+ };
|
|
+
|
|
+ spi6_pins: spi6_pins {
|
|
+ brcm,pins = <19 20 21>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT3>;
|
|
+ };
|
|
+
|
|
+ spi6_cs_pins: spi6_cs_pins {
|
|
+ brcm,pins = <18 27>;
|
|
+ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
|
+ };
|
|
+
|
|
+ i2c0_pins: i2c0 {
|
|
+ brcm,pins = <0 1>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT0>;
|
|
+ brcm,pull = <BCM2835_PUD_UP>;
|
|
+ };
|
|
+
|
|
+ i2c1_pins: i2c1 {
|
|
+ brcm,pins = <2 3>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT0>;
|
|
+ brcm,pull = <BCM2835_PUD_UP>;
|
|
+ };
|
|
+
|
|
+ i2c3_pins: i2c3 {
|
|
+ brcm,pins = <4 5>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT5>;
|
|
+ brcm,pull = <BCM2835_PUD_UP>;
|
|
+ };
|
|
+
|
|
+ i2c4_pins: i2c4 {
|
|
+ brcm,pins = <8 9>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT5>;
|
|
+ brcm,pull = <BCM2835_PUD_UP>;
|
|
+ };
|
|
+
|
|
+ i2c5_pins: i2c5 {
|
|
+ brcm,pins = <12 13>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT5>;
|
|
+ brcm,pull = <BCM2835_PUD_UP>;
|
|
+ };
|
|
+
|
|
+ i2c6_pins: i2c6 {
|
|
+ brcm,pins = <22 23>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT5>;
|
|
+ brcm,pull = <BCM2835_PUD_UP>;
|
|
+ };
|
|
+
|
|
+ i2s_pins: i2s {
|
|
+ brcm,pins = <18 19 20 21>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT0>;
|
|
+ };
|
|
+
|
|
+ sdio_pins: sdio_pins {
|
|
+ brcm,pins = <34 35 36 37 38 39>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1
|
|
+ brcm,pull = <0 2 2 2 2 2>;
|
|
+ };
|
|
+
|
|
+ bt_pins: bt_pins {
|
|
+ brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0
|
|
+ // to fool pinctrl
|
|
+ brcm,function = <0>;
|
|
+ brcm,pull = <2>;
|
|
+ };
|
|
+
|
|
+ uart0_pins: uart0_pins {
|
|
+ brcm,pins = <32 33>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT3>;
|
|
+ brcm,pull = <0 2>;
|
|
+ };
|
|
+
|
|
+ uart1_pins: uart1_pins {
|
|
+ brcm,pins;
|
|
+ brcm,function;
|
|
+ brcm,pull;
|
|
+ };
|
|
+
|
|
+ uart2_pins: uart2_pins {
|
|
+ brcm,pins = <0 1>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT4>;
|
|
+ brcm,pull = <0 2>;
|
|
+ };
|
|
+
|
|
+ uart3_pins: uart3_pins {
|
|
+ brcm,pins = <4 5>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT4>;
|
|
+ brcm,pull = <0 2>;
|
|
+ };
|
|
+
|
|
+ uart4_pins: uart4_pins {
|
|
+ brcm,pins = <8 9>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT4>;
|
|
+ brcm,pull = <0 2>;
|
|
+ };
|
|
+
|
|
+ uart5_pins: uart5_pins {
|
|
+ brcm,pins = <12 13>;
|
|
+ brcm,function = <BCM2835_FSEL_ALT4>;
|
|
+ brcm,pull = <0 2>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&i2c0if {
|
|
+ clock-frequency = <100000>;
|
|
+};
|
|
+
|
|
+&i2c1 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2c1_pins>;
|
|
+ clock-frequency = <100000>;
|
|
+};
|
|
+
|
|
+&i2s {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2s_pins>;
|
|
+};
|
|
+
|
|
+/ {
|
|
+ __overrides__ {
|
|
+ /delete-property/ i2c2_baudrate;
|
|
+ /delete-property/ i2c2_iknowwhatimdoing;
|
|
+ };
|
|
+};
|
|
+
|
|
+// =============================================
|
|
+// Board specific stuff here
|
|
+
|
|
+/ {
|
|
+ sd_vcc_reg: sd_vcc_reg {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc-sd";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-boot-on;
|
|
+ enable-active-high;
|
|
+ gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&sdhost {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&emmc2 {
|
|
+ vmmc-supply = <&sd_vcc_reg>;
|
|
+ bus-width = <8>;
|
|
+};
|
|
+
|
|
+&phy1 {
|
|
+ led-modes = <0x00 0x08>; /* link/activity link */
|
|
+};
|
|
+
|
|
+&gpio {
|
|
+ audio_pins: audio_pins {
|
|
+ brcm,pins = <40 41>;
|
|
+ brcm,function = <4>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&leds {
|
|
+ act_led: act {
|
|
+ label = "led0";
|
|
+ linux,default-trigger = "mmc0";
|
|
+ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+
|
|
+ pwr_led: pwr {
|
|
+ label = "led1";
|
|
+ linux,default-trigger = "default-on";
|
|
+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&pwm1 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&audio {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&audio_pins>;
|
|
+};
|
|
+
|
|
+&vc4 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&pixelvalve0 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&pixelvalve1 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&pixelvalve2 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&pixelvalve3 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&pixelvalve4 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&hdmi0 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&ddc0 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&hdmi1 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&ddc1 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+/ {
|
|
+ __overrides__ {
|
|
+ act_led_gpio = <&act_led>,"gpios:4";
|
|
+ act_led_activelow = <&act_led>,"gpios:8";
|
|
+ act_led_trigger = <&act_led>,"linux,default-trigger";
|
|
+
|
|
+ pwr_led_gpio = <&pwr_led>,"gpios:4";
|
|
+ pwr_led_activelow = <&pwr_led>,"gpios:8";
|
|
+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
|
|
+
|
|
+ eth_led0 = <&phy1>,"led-modes:0";
|
|
+ eth_led1 = <&phy1>,"led-modes:4";
|
|
+
|
|
+ ant1 = <&ant1>,"output-high?=on",
|
|
+ <&ant1>, "output-low?=off",
|
|
+ <&ant2>, "output-high?=off",
|
|
+ <&ant2>, "output-low?=on";
|
|
+ ant2 = <&ant1>,"output-high?=off",
|
|
+ <&ant1>, "output-low?=on",
|
|
+ <&ant2>, "output-high?=on",
|
|
+ <&ant2>, "output-low?=off";
|
|
+ noant = <&ant1>,"output-high?=off",
|
|
+ <&ant1>, "output-low?=on",
|
|
+ <&ant2>, "output-high?=off",
|
|
+ <&ant2>, "output-low?=on";
|
|
+
|
|
+ spi_dma4 = <&spi0>, "dmas:0=", <&dma40>,
|
|
+ <&spi0>, "dmas:8=", <&dma40>;
|
|
+ };
|
|
+};
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -92,6 +92,12 @@ Name: <The base DTB>
|
|
Info: Configures the base Raspberry Pi hardware
|
|
Load: <loaded automatically>
|
|
Params:
|
|
+ ant1 Select antenna 1 (default). CM4 only.
|
|
+
|
|
+ ant2 Select antenna 2. CM4 only.
|
|
+
|
|
+ noant Disable both antennas. CM4 only.
|
|
+
|
|
audio Set to "on" to enable the onboard ALSA audio
|
|
interface (default "off")
|
|
|