ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-25 08:21:14 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
f038a169a0
openwrt/target/linux/ipq40xx/patches-5.4/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch
Adrian Schmutzler 9b1b89229f kernel: bump 5.4 to 5.4.86 
Removed upstreamed patches:
  pending-5.4/499-mtd-parser-cmdline-Fix-parsing-of-part-names-with-co.patch

Manually merged:
  pending-5.4/611-netfilter_match_bypass_default_table.patch
  layerscape/302-dts-0112-arm64-dts-fsl-ls1028a-prepare-dts-for-overlay.patch

Build-tested: ipq806x/R7800, bcm27xx/bcm2711, ath79/{generic,tiny},
              ipq40xx, octeon, ramips/mt7621, realtek, x86/64
Run-tested: ipq806x/R7800, realtek

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: John Audia <graysky@archlinux.us>
Tested-by: Stijn Segers <foss@volatilesystems.org>
2021-01-01 17:07:28 +01:00

420 lines
11 KiB
Diff
Raw Blame History

From 59e056cda4beb5412e3653e6360c2eb0fa770baa Mon Sep 17 00:00:00 2001
From: Eneas U de Queiroz <cotequeiroz@gmail.com>
Date: Fri, 20 Dec 2019 16:02:18 -0300
Subject: [PATCH 07/11] crypto: qce - allow building only hashes/ciphers
Allow the user to choose whether to build support for all algorithms
(default), hashes-only, or skciphers-only.
The QCE engine does not appear to scale as well as the CPU to handle
multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the
QCE handles only 2 requests in parallel.
Ipsec throughput seems to improve when disabling either family of
algorithms, sharing the load with the CPU. Enabling skciphers-only
appears to work best.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -617,6 +617,14 @@ config CRYPTO_DEV_QCE
tristate "Qualcomm crypto engine accelerator"
depends on ARCH_QCOM || COMPILE_TEST
depends on HAS_IOMEM
+ help
+ This driver supports Qualcomm crypto engine accelerator
+ hardware. To compile this driver as a module, choose M here. The
+ module will be called qcrypto.
+
+config CRYPTO_DEV_QCE_SKCIPHER
+ bool
+ depends on CRYPTO_DEV_QCE
select CRYPTO_AES
select CRYPTO_LIB_DES
select CRYPTO_ECB
@@ -624,10 +632,57 @@ config CRYPTO_DEV_QCE
select CRYPTO_XTS
select CRYPTO_CTR
select CRYPTO_BLKCIPHER
+
+config CRYPTO_DEV_QCE_SHA
+ bool
+ depends on CRYPTO_DEV_QCE
+
+choice
+ prompt "Algorithms enabled for QCE acceleration"
+ default CRYPTO_DEV_QCE_ENABLE_ALL
+ depends on CRYPTO_DEV_QCE
help
- This driver supports Qualcomm crypto engine accelerator
- hardware. To compile this driver as a module, choose M here. The
- module will be called qcrypto.
+ This option allows to choose whether to build support for all algorihtms
+ (default), hashes-only, or skciphers-only.
+
+ The QCE engine does not appear to scale as well as the CPU to handle
+ multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the
+ QCE handles only 2 requests in parallel.
+
+ Ipsec throughput seems to improve when disabling either family of
+ algorithms, sharing the load with the CPU. Enabling skciphers-only
+ appears to work best.
+
+ config CRYPTO_DEV_QCE_ENABLE_ALL
+ bool "All supported algorithms"
+ select CRYPTO_DEV_QCE_SKCIPHER
+ select CRYPTO_DEV_QCE_SHA
+ help
+ Enable all supported algorithms:
+ - AES (CBC, CTR, ECB, XTS)
+ - 3DES (CBC, ECB)
+ - DES (CBC, ECB)
+ - SHA1, HMAC-SHA1
+ - SHA256, HMAC-SHA256
+
+ config CRYPTO_DEV_QCE_ENABLE_SKCIPHER
+ bool "Symmetric-key ciphers only"
+ select CRYPTO_DEV_QCE_SKCIPHER
+ help
+ Enable symmetric-key ciphers only:
+ - AES (CBC, CTR, ECB, XTS)
+ - 3DES (ECB, CBC)
+ - DES (ECB, CBC)
+
+ config CRYPTO_DEV_QCE_ENABLE_SHA
+ bool "Hash/HMAC only"
+ select CRYPTO_DEV_QCE_SHA
+ help
+ Enable hashes/HMAC algorithms only:
+ - SHA1, HMAC-SHA1
+ - SHA256, HMAC-SHA256
+
+endchoice
config CRYPTO_DEV_QCOM_RNG
tristate "Qualcomm Random Number Generator Driver"
--- a/drivers/crypto/qce/Makefile
+++ b/drivers/crypto/qce/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_CRYPTO_DEV_QCE) += qcrypto.o
qcrypto-objs := core.o \
common.o \
- dma.o \
- sha.o \
- skcipher.o
+ dma.o
+
+qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SHA) += sha.o
+qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SKCIPHER) += skcipher.o
--- a/drivers/crypto/qce/common.c
+++ b/drivers/crypto/qce/common.c
@@ -45,52 +45,56 @@ qce_clear_array(struct qce_device *qce,
qce_write(qce, offset + i * sizeof(u32), 0);
}
-static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size)
+static u32 qce_config_reg(struct qce_device *qce, int little)
{
- u32 cfg = 0;
+ u32 beats = (qce->burst_size >> 3) - 1;
+ u32 pipe_pair = qce->pipe_pair_id;
+ u32 config;
- if (IS_AES(flags)) {
- if (aes_key_size == AES_KEYSIZE_128)
- cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT;
- else if (aes_key_size == AES_KEYSIZE_256)
- cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT;
- }
+ config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK;
+ config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) |
+ BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT);
+ config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK;
+ config &= ~HIGH_SPD_EN_N_SHIFT;
- if (IS_AES(flags))
- cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT;
- else if (IS_DES(flags) || IS_3DES(flags))
- cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT;
+ if (little)
+ config |= BIT(LITTLE_ENDIAN_MODE_SHIFT);
- if (IS_DES(flags))
- cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT;
+ return config;
+}
- if (IS_3DES(flags))
- cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT;
+void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len)
+{
+ __be32 *d = dst;
+ const u8 *s = src;
+ unsigned int n;
- switch (flags & QCE_MODE_MASK) {
- case QCE_MODE_ECB:
- cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT;
- break;
- case QCE_MODE_CBC:
- cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT;
- break;
- case QCE_MODE_CTR:
- cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT;
- break;
- case QCE_MODE_XTS:
- cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT;
- break;
- case QCE_MODE_CCM:
- cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT;
- cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT;
- break;
- default:
- return ~0;
+ n = len / sizeof(u32);
+ for (; n > 0; n--) {
+ *d = cpu_to_be32p((const __u32 *) s);
+ s += sizeof(__u32);
+ d++;
}
+}
- return cfg;
+static void qce_setup_config(struct qce_device *qce)
+{
+ u32 config;
+
+ /* get big endianness */
+ config = qce_config_reg(qce, 0);
+
+ /* clear status */
+ qce_write(qce, REG_STATUS, 0);
+ qce_write(qce, REG_CONFIG, config);
+}
+
+static inline void qce_crypto_go(struct qce_device *qce)
+{
+ qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT));
}
+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
static u32 qce_auth_cfg(unsigned long flags, u32 key_size)
{
u32 cfg = 0;
@@ -137,88 +141,6 @@ static u32 qce_auth_cfg(unsigned long fl
return cfg;
}
-static u32 qce_config_reg(struct qce_device *qce, int little)
-{
- u32 beats = (qce->burst_size >> 3) - 1;
- u32 pipe_pair = qce->pipe_pair_id;
- u32 config;
-
- config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK;
- config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) |
- BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT);
- config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK;
- config &= ~HIGH_SPD_EN_N_SHIFT;
-
- if (little)
- config |= BIT(LITTLE_ENDIAN_MODE_SHIFT);
-
- return config;
-}
-
-void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len)
-{
- __be32 *d = dst;
- const u8 *s = src;
- unsigned int n;
-
- n = len / sizeof(u32);
- for (; n > 0; n--) {
- *d = cpu_to_be32p((const __u32 *) s);
- s += sizeof(__u32);
- d++;
- }
-}
-
-static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize)
-{
- u8 swap[QCE_AES_IV_LENGTH];
- u32 i, j;
-
- if (ivsize > QCE_AES_IV_LENGTH)
- return;
-
- memset(swap, 0, QCE_AES_IV_LENGTH);
-
- for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1;
- i < QCE_AES_IV_LENGTH; i++, j--)
- swap[i] = src[j];
-
- qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH);
-}
-
-static void qce_xtskey(struct qce_device *qce, const u8 *enckey,
- unsigned int enckeylen, unsigned int cryptlen)
-{
- u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0};
- unsigned int xtsklen = enckeylen / (2 * sizeof(u32));
- unsigned int xtsdusize;
-
- qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2,
- enckeylen / 2);
- qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen);
-
- /* xts du size 512B */
- xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen);
- qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize);
-}
-
-static void qce_setup_config(struct qce_device *qce)
-{
- u32 config;
-
- /* get big endianness */
- config = qce_config_reg(qce, 0);
-
- /* clear status */
- qce_write(qce, REG_STATUS, 0);
- qce_write(qce, REG_CONFIG, config);
-}
-
-static inline void qce_crypto_go(struct qce_device *qce)
-{
- qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT));
-}
-
static int qce_setup_regs_ahash(struct crypto_async_request *async_req,
u32 totallen, u32 offset)
{
@@ -303,6 +225,87 @@ go_proc:
return 0;
}
+#endif
+
+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
+static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size)
+{
+ u32 cfg = 0;
+
+ if (IS_AES(flags)) {
+ if (aes_key_size == AES_KEYSIZE_128)
+ cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT;
+ else if (aes_key_size == AES_KEYSIZE_256)
+ cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT;
+ }
+
+ if (IS_AES(flags))
+ cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT;
+ else if (IS_DES(flags) || IS_3DES(flags))
+ cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT;
+
+ if (IS_DES(flags))
+ cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT;
+
+ if (IS_3DES(flags))
+ cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT;
+
+ switch (flags & QCE_MODE_MASK) {
+ case QCE_MODE_ECB:
+ cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT;
+ break;
+ case QCE_MODE_CBC:
+ cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT;
+ break;
+ case QCE_MODE_CTR:
+ cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT;
+ break;
+ case QCE_MODE_XTS:
+ cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT;
+ break;
+ case QCE_MODE_CCM:
+ cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT;
+ cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT;
+ break;
+ default:
+ return ~0;
+ }
+
+ return cfg;
+}
+
+static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize)
+{
+ u8 swap[QCE_AES_IV_LENGTH];
+ u32 i, j;
+
+ if (ivsize > QCE_AES_IV_LENGTH)
+ return;
+
+ memset(swap, 0, QCE_AES_IV_LENGTH);
+
+ for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1;
+ i < QCE_AES_IV_LENGTH; i++, j--)
+ swap[i] = src[j];
+
+ qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH);
+}
+
+static void qce_xtskey(struct qce_device *qce, const u8 *enckey,
+ unsigned int enckeylen, unsigned int cryptlen)
+{
+ u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0};
+ unsigned int xtsklen = enckeylen / (2 * sizeof(u32));
+ unsigned int xtsdusize;
+
+ qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2,
+ enckeylen / 2);
+ qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen);
+
+ /* xts du size 512B */
+ xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen);
+ qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize);
+}
static int qce_setup_regs_skcipher(struct crypto_async_request *async_req,
u32 totallen, u32 offset)
@@ -384,15 +387,20 @@ static int qce_setup_regs_skcipher(struc
return 0;
}
+#endif
int qce_start(struct crypto_async_request *async_req, u32 type, u32 totallen,
u32 offset)
{
switch (type) {
+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
case CRYPTO_ALG_TYPE_SKCIPHER:
return qce_setup_regs_skcipher(async_req, totallen, offset);
+#endif
+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
case CRYPTO_ALG_TYPE_AHASH:
return qce_setup_regs_ahash(async_req, totallen, offset);
+#endif
default:
return -EINVAL;
}
--- a/drivers/crypto/qce/core.c
+++ b/drivers/crypto/qce/core.c
@@ -22,8 +22,12 @@
#define QCE_QUEUE_LENGTH 1
static const struct qce_algo_ops *qce_ops[] = {
+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
&skcipher_ops,
+#endif
+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
&ahash_ops,
+#endif
};
static void qce_unregister_algs(struct qce_device *qce)
Reference in New Issue View Git Blame Copy Permalink